Skip to: | |

Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.

If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.

Newegg.com - Computer Parts, Laptops, Electronics, HDTVs, Digital Cameras and More!

PremierTry Message.
Home
Home > 
Components > 
Fans & PC Cooling > 
VGA Cooling > 
Enzotech > 
Item#: N82E16835708008

Enzotech BMR-C1 VGA Cooler

Sold and Shipped by Newegg

  • C1100 Forged Copper

ICON Loading...
  • Specifications
  • Warranty & Returns
  • Reviews

Learn more about the Enzotech BMR-C1

Warranty, Returns, And Additional Information

Customer Reviews of the Enzotech BMR-C1

Do you own this product? Write a Review

ICON Loading...

Filter Results

Go
  • Sage B.
  • 12/11/2015 6:38:34 AM
  • Ownership: 1 day to 1 week
  • Verified Owner

5 out of 5 eggsGreat Product!

Pros: Put these on a reference design AMD 5770. Had the card for about 4 years, and the VRM started overheating and causing crashes after an hour or 2, even at just idle. (Photoshop/Lightroom machine) (Common issue for these cards as well..)

Bought these babies, slapped them on and ran a stress test on FurMark for 3 and a half hours without an issue. Even helped lower the core temp 3 degrees. Used to hit about 77C, now it's bouncing between 73-74. They pull A LOT of heat off the memory modules, and I 100% recommend them to anyone with heat issues. They can be placed right up against one another too, so if you have a chip-set that needs a heatsink, these would work.

Very high grade copper, and the thermal pads won't give you any problems if you heat cycle them as soon as you put them on. They seem to have a very strong hold on the chips after the burn in test.

Packaging was nice and typical fast Newegg shipping.

Cons: None, not a single one honestly.

Other Thoughts: They were the perfect size for the build the card is in, but others might have issues. Make sure to measure your clearances and everything before ordering these, they do make small models.

These are worth spending the extra $10 vs the cheap fleebay "full copper" coolers and get the job done correctly. The copper looks nice too.

Now I just have to find what I want to put the other 4 on :P

Did you find this review helpful? Yes No

  • William P.
  • 10/10/2015 11:22:56 AM
  • Ownership: 1 week to 1 month
  • Verified Owner

5 out of 5 eggsAdaptable

Pros: The usual Enzotech quality, materials, and design. I was using these next to a heatpipe cooler on a VGA card and had to move the cooler. With aluminum heatsinks I would have had a clearance problem. with the Enzotechs I just leaned the pins out of the way, and didn't have to compromise on heatsink size. Produced a nice custom fitted look.

Cons: Can't think of any.

Other Thoughts: Custom fitting HD6970 into Dell BTX computer.

Did you find this review helpful? Yes No

  • Anonymous
  • 9/3/2014 10:24:00 AM
  • Ownership: 1 day to 1 week
  • Verified Owner

5 out of 5 eggsNice little heatsinks

Pros: works very well. Look just like the pictures and came packaged better than I expected.

Cons: not cheaper. but they are copper so can't complain to much

Did you find this review helpful? Yes No

  • Teka C.
  • 4/18/2014 8:20:30 PM
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsVery Nice heatsinks

Pros: Great heatsinks. I bought these to cool the VRM chips on my motherboard. They do the job well. The thermal adhesive on these is the best I've ever seen, hands down.

Cons: None

Other Thoughts: Only stick-on heatsinks I've ever bought that didn't fall off eventually. Everything about these is great, from the quality of the heatsink itself, to the thermal pads, and heck even the packaging is top notch.

Did you find this review helpful? Yes No

5 out of 5 eggsFits the job exactly as needed.

Pros: - Adheres strongly without coming off providing the surface areas are properly cleaned prior to application and then heat cycled after.
- The Thermal tape comes already applied for an effort free application.
- Copper being soft as it is was a breeze to reshape 2 pins due to blocking a CPU power connection clip.

Cons: None that I can foresee really. They are heatsinks and serve the purpose compared to not having them in the first place.

Other Thoughts: If only they came with taller heights like that of the full length VRM solutions for specific boards such as the MST-66/88. The dimensions however were an exact fit for the VRM clusters on a Gigabyte 880GMA-USB3 v3.1 motherboard.

Did you find this review helpful? Yes No

  • Brian S.
  • 7/26/2013 11:16:06 PM
  • Ownership: 1 day to 1 week
  • Verified Owner

3 out of 5 eggsmeh...

Pros: meh...
just an observation

Cons: meh...
just an observation

Other Thoughts: I've noted some temp data

Prior to these heat sinks my idle temps were 58 °C VGA, 39 CPU, & 36 MB. Under load the temps were 88 VGA, 50 CPU, & 41 MB.

After sticking them to various components my temps read the same at idle and under load my CPU was 2 degrees lower while my VGA was 2 warmer and my MB was 1 warmer.

I attached the heat sinks to my VGA and MD, which both increased in heat, but my CPU dropped in temp!?

Science is working against me. I don't understand. But I'll take the drop in CPU temp for what it is.

2 out of 5 people found this review helpful. Did you? Yes No

  • Paul H.
  • 12/7/2012 9:20:57 PM
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsKOOOL

Pros: Good looking, effective, and easy to install. Sticks well.

Cons: n/a

Other Thoughts: I used these to complete "The MOD", like at overclock net. An Antec H2O 620 pulls my GTX560TI GPU down to the 50s C with OC and full load.

Did you find this review helpful? Yes No

  • Tom L.
  • 12/7/2012 9:20:26 PM
  • Ownership: 1 day to 1 week
  • Verified Owner

5 out of 5 eggsPerfect

Pros: Excellent and it comes with Thermal Tape which i didn't see in it's description. I used these to cool the FB-DIMMS in my Mac Pro which tend to run hot. and they dropped the temp by a 25 degrees. I am pleased beyond words

Cons: None

Other Thoughts: If they work this good on FB-DIMMS they will probably do a tremendous job on a Video Card Memory part

Did you find this review helpful? Yes No

  • Tristan C.
  • 3/29/2012 9:09:30 AM
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggsAwesome little sinks

Pros: Economical, can be used in a variety of places, very sturdy hold with the default thermal tape, but gives you the option of removing them later (compared to thermal epoxy). They seem quite effective at sucking heat off of whatever they're attached to.

Cons: None that I can think of.

Other Thoughts: I got several packages of these for memory and VRM cooling on my 2 HD4870s when I moved them to water cooling. They definitely move a lot of heat, you can feel them getting warm when they cards are under load. My cards used to suffer crashes related to overheated VRMS, but they have been completely solid since the upgrade. I was also happy that these taller version ram sinks fit under my water block's barbs without needing to bend the fins out of the way.

2 out of 2 people found this review helpful. Did you? Yes No

  • Douglas W.
  • 6/27/2011 12:28:16 PM
  • Ownership: 1 month to 1 year
  • Verified Owner

5 out of 5 eggscooling

Pros: heavy, and tall work great on cooling lower gpu

Cons: none

Other Thoughts: needed to bring my number 2 gpu down about 15Degrees worked great

1 out of 1 people found this review helpful. Did you? Yes No

ICON Loading...
Selected Items
Are you an E-Blast Insider? Subscribe Newegg e-Blast
PayPal
Shop without retyping payment details. Secure shopping made faster.
Check out with PayPal.
Home
Home > 
Components > 
Fans & PC Cooling > 
VGA Cooling > 
Enzotech > 
Item#: N82E16835708008
If the Adobe Reader does not appear when you click on a link for a PDF file, you can download Adobe Reader from the Adobe web site.