Rosewill RHTB-11002 Black 26" to 46" LCD LED TV Tilt Wall Mount

Pros: Very easy to install and it is very sturdy if you can install it without your cables getting in the way (see cons). Comes with all the hardware you will need for most TVs. It even comes with a level!

Cons: On my TV my HDMI plugs are located on the back side at the bottom of the TV. When I tilt the TV down to give the correct angle of view the HDMI cables are pressed against the wall. I had to not attach the bottom of the bracket in order to not smash my cables so the Bracket is holding on only at the top. Not a big deal as I don't live in earth quake country and where this TV is located will never get bumped or moved.

Other Thoughts: I would have given this 5 eggs if the stand held the TV about 4 more inches away from the wall. This would have allowed all my video cables from being pressed against the wall and still allow me to attach the bracket at both the top and bottom.

Pros: Price

Cons: Have yet to mount it so i only took off 2 eggs. I bought this for my 40" sceptre lcd. the sceptre lcd uses m5 screws for mounting which this mount does not come with. Had to go buy them at home depot for like 4 dollars because they didn't have the right length for the m5 screw so i bought a couple different ones. This is a big con for me because I had to waste gas to go home depot then spend money on more parts.

The instructions were really bad too.

Other Thoughts: If your tv uses m5 screws don't buy this.

Pros: Solid, solid, solid mount. Not concerned at all that it would break. I feel like i could do pull-ups on it, no problem.
The whole setup just feels quality as well. Nothing flexes, it is just rock-solid.

Cons: none

Other Thoughts: I would buy this mount again.

Pros: Solid mount, tons of extra mounting hardware

Cons: Kinda weak instructions...

Other Thoughts: This mount is VERY solid, looks stylish, has a spring mounted tilt feature, tons of mounting hardware including a magnetic bubble level. It was very easy to install despite the fact that the instructions were rather weak. All I had to do was to locate the two studs, drill the first pilot hole, put the bracket up using the one screw to hold it, level it with the included level and then drill the other 3 holes. In all, I used were the 4 lag screws and 4 smaller machine screws on the back of the TV. There were A LOT of screws and mounting options left over and I saved them for some unknown future project. I paid $29.99 and it came with a free 6ft. HDMI cable and free shipping. What a great deal, thanks NewEgg!

Pros: Looks to be pretty good quality, packaged nicely and included all hardware required for various types of tv backings. One really nice included piece of hardware is the level with magnetic strip to use when mounting the bracket. Easy to follow instructions and lots of warnings of things to look out for

Cons: Tiny font on instructions could be difficult for people to read. Bracket could be a little wider, able to mount all 4 lag bolts ONLY if the studs are within 16". Somewhat difficult to toggle the tilt mechanism with minimal clearance to get my hands back there.

Other Thoughts: Installation is possible with one person as I did it myself but infinitely easier with an extra pair of hands.

Pros: Beefier than I expected.
Tilt mechanism works surprisingly well.
Affordable.
new egg ships fast.

Cons: Didn't mount itself.

Other Thoughts: Hung a 46" Samsung LED to a brick fireplace. Very uneven surface had me considering a plywood spacer between block and this mount. Stiffness of the bracket made the plywood unnecessary.
Solid, inexpensive mount.

Pros: 2-4 minutes from opening the package til hooked up to the computer. Computer found the drive right away with no problems. Pulled a 640 GB HHD out of my Laptop and replaced it with a 1TB HHD. Put the 640 in this case and worked 100%. Drive slipped in perfect with no room to move around and get damaged.

Cons: Wasn't free???

Pros: Reviewed a lot of mounts while shopping and went with this one. The price was good for me for the options I was looking for. Mounted easily to the wall and TV. Mounted a 46" LED over a brick fire place. I used blue tap cons(concrete screws) instead of the ones in box. Tilting is easy and locks into position.

Cons: Instructions are printed small but I could read them.

Other Thoughts: Good mount and good price.

Pros: Mount is really heavy duty and comes with every thing you need if mounting holes are correct on your TV, Got on sale here for 29.99 and worth every penny.

Cons: TV is not that close to wall

Pros: Came with plenty of mounting hardware. Seems very sturdy.

Cons: If you're mounting a 400mm X 400mm display, don't mount the lag screws within 2" of either end. The mount will not sit into the track if the lag bolts are in the way. Also, because the unit is so narrow (it barely spans the 16" studs), you'll most likely NOT be able to mount it with 4 lag bolts.