Rosewill RHTB-11011 Black 17" - 32" Tilt/Swivel Wall Mount Rosewill RHTB-11011 Black 17" - 32" Tilt/Swivel Wall Mount

Pros: The quality of this mount in general is high. All the joints are made well and the material is very sturdy steel with a matte black finish. I especially like the "wall plate/drop-in arm bracket" design making it very easy for 1 person to hang the display with no extra "hands" needed.

Cons: The size of the VESA plate that gives this bracket such a range in accommodated VESA sizes is so big that it completely covered the power, HDMI and DVI inputs on the back of the ASUS 23.6" display I purchased to hang on it. I suppose most LED TVs have all inputs on the edge but many PC displays have their inputs on the back of the panel an inch or more up from the bottom. For my 23.6" display the VESA 100x100 matches up fine but there is just no way to connect anything else to the back. Sadly spending most of my refund on return postage and restocking fee.

Other Thoughts: Would recommend this mount with no questions if the display being mounted has all connections on the edge or outside the 8"x10" needed for the VESA plate

Pros: Great mount, solid, so many angles

Cons: Wire "coral" @ bottom SO CHEAP, breaks or falls out instantly. Difficult to hit stud exactly as need with this mount.(see other thoughts) Mounting bolts cheap, use your own.

Other Thoughts: This is my second mount and I am very pleased even with Cons listed. Mounting second TV(32" LCD), I had no stud where I needed it. Used 1/4"x 1 1/4" bolts with fender washers on backside of wall. Have wall plates right next to mount for cables and was able to reach through wall and get nuts on. So far so good.

Pros: Perfect for the 24" TV that I also bought from Newegg. Easy installation.

Cons: No problems.

Other Thoughts: I hope Newegg will allow this comment: This TV mount fits the Toshiba 24" Class (23.81" Diag.) 1080p 60Hz LED HDTV 24L4200U that I bought along with the mount. Other people had issues with this mount not fitting their specific TV but these two fit together with no problems. I wish someone had confirmed that these two fit before I bought them but I took the chance anyway and it paid off.

Pros: Not sure what to say about this wall mount. It looks sturdy and well built. I'm sure it would work great; however, I never actually got to use it because newegg decided to bundle it with a TV that is not compatible.

Cons: When I called up to get a refund or the right wall mount. Newegg gave me the run around only to find out that they were going to charge me for shipping it back and a restocking fee on top of deducting the money I saved by bundling. Claiming that they don't guarantee that things they bundle will be compatible. Be weary when buying combos people. I have since stopped shopping from newegg. I just wanted to warn others to not make a dumb mistake like I did. Always check for compatibility even when you trust a website to help your shopping experience by bundling compatible products.

Pros: Well built and the holes match up to my TV. I like how you mount the holder to the wall which is light and easy to hold and then mount the rest to the TV and then slide it in. Well thought out system.

Cons: The screws supplied are junk like the other reviews. I tried one and it broke so I went to Lowes and bought new ones.

Other Thoughts: I bought two of these for two different TVs and both mounted without hassle.

Pros: Easy set up. The mounting holes are in a straight vertical line so you only need to find one stud to mount on the wall.

Cons: None

Other Thoughts: I followed the suggestions of other reviewers and replaced the included screws with my own. Had no problems. Set up took under half and hour. I used the mount for a 23 inch monitor and it works great.

Pros: very well made, nice and sturdy. This was placed in our bedroom. Very easy to install, even though the supplied directions you needed a magnifying glass to read.

Cons: like many have said here and on other sites, the wood screws are extremely soft. Knowing this I only tried 1 screw just to test, yep, started to strip the head. Used my own screws.

Supplied instructions extremely small to read.

Other Thoughts: had shipping issues with Newegg. Had free 3 day shipping and it took 4 days, technically it took 5. Ordered on 11/26, Received e-mail that it shipped on 11/27, but carrier (UPS) didn't pick up/process until 11/29 and for some reason, Monday 12/3 is not counted as a business day. First shipping issue with newegg.

Pros: great price, feels good and solid.

Cons: none

Other Thoughts: doesn't come with correct screw size for Sceptre 32 X328BV-FHD, no big deal, just one trip to ace to remedy, not worth knocking an egg. as always newegg comes through again!

Pros: Just got it today, it looks very sturdy and it should fit my needs for a 24" Haier 24" TV mounted in a RV, but with reservations in the Cons section

Cons: First, this is a generic mount, so fitting 100 mm TV mount is not perfect. For my 24" Haier TV I will need to saw off some of the bottom of the mount to fit with the power cord and video connections on this TV.
The only other comment I have before mounting it is that the tilt is overly tight. If you try and adjust it using the edges of the TV, you may cause damage to the TV. I suggest you lube the tilt hardware and operate it before you mount the TV to loosen it up some.

Pros: Inexpensive (29.99 sale) VESA compliant so worked great with a 32" LG. Installation was a breeze. Made my mother very happy.

Cons: - Not so much a con, but after reading other reviews; I skipped using the supplied wall screws and used proper wood screw to secure the plate to the wall. The problem is the instructions say to use a 3mm drill to tap the wood, but the anchor screws are almost 1/4" thick, so people have been twisting the heads off and stripping the screws. Using a decent wood screw straight away saved me aggravation.

Other Thoughts: The Chrome colored (plastic) knob doesn't do all the tilting. It has to be loosened, then the screw on the opposite side has to be loosened using a Phillips screwdriver before tilting. might as well have just designed it with two screws.