Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: Interface: IDE to SATA
Cable Length: 18.11" (460mm)
Features: Converts IDE Devices (Hard Drive, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc…) to Serial ATA Connection
Supports ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, and IDE Devices
Compliant with ATA Specifications
Compliant with Serial ATA Gen 1.0
1 IDE Input Port
1 SATA Output Port
Specifications: Software Requirement:
Windows Server 2003-2008
Mac 10.3 or later
Linux (AHCI system and BIOS preferred)
1 x PC/laptop with SATA / USB interface (SATA III / USB 3.0 interface preferred)
Dimensions: 1.00" x 3.60" x 5.50" (H x W x L)
Weight: 0.23 lb.
Features: Complies with Serial ATA Specification Rev 3.1
Supports SATA III, SATA II, and SATA I operation
Complies with USB 3.0 Specification Rev 1.0
Supports USB Super-Speed, High-Speed, Full-Speed operation
Support USB 3.0 / USB 2.0 power saving mode
Complies with USB Mass Storage Class Bulk-Only Transport Specification Rev 1.0
Complies with USB attached SCSI protocol Specification Rev 1.0
Standard 2.5" SATA storage device form factor (100mm x 70mm x 7mm)
Transparent to OS and does not requi...
External power supply: 100-240VAC +12V/+5V / +3.5A (included)
Power input: +12V/+5V DC input jack; +12V / +5V standard disk drive
Power output: +12V / +5V
Power switch: On / Off
HPA / DCO Detection
Power input active
Power output active
FireWire 800: up to 800 Mbps
FireWire 400: up to 400 Mbps
USB 3.0 port: up to 5 Gbps
eSATA port: up to 3 Gbps
5% to 95%, noncondensing
3.5" IDE / PATA drive
2.5" / 3.5" SATA drive
Windows 7, Vista, XP
Macintosh OS X
Linux distributions that support the desired connection type.
4 lbs. (including AC adapter)
4.3" x 2.95" x 1.06" (110mm x 75mm x 27mm) exclusive of attached plates, drives and cables
Specifications: Includes 1 x Combined 7+15 pin SATA plus LP4 Power to SATA Cable
Connectors 1x SATA 7 pin Female Connector
Connectors 1x SATA 15 pin Female Connector
Connectors 1x LP4 Male Connector
Features: Mount a 2.5in SATA hard drive to any computer with an available 3.5in bay. This Serial ATA hard drive mounting kit allows you to install a 2.5in SATA hard drive in a 3.5in drive bay.
The 2.5in to 3.5in SATA hard drive mounting kit features a sturdy aluminum bracket, as well as a combined 7+15 pin SATA + LP4 Power to SATA cable - which helps simplify installation and reduce clutter within the computer case.
Specifications: Connector Types: 1 - IDE 40 pin Male
Connector Types: 1 - SATA Data 7 pin Plug
Connector Types: 1 - SATA Power Plug
Connector Types: 1 - SP4 Male
Enclosure Type: Steel
LBA support: 48-bit
Product Height: 1.02 in [26 mm]
Product Length: 3.98 in [101 mm]
Product Weight: 3.67 oz [104 g]
Product Width: 3.07 in [78 mm]
Humidity: 8% ~ 90% RH
Operating Temperature: 5°C to 80°C (41°F to 176°F)
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Chipset ID: JMicron JM20330
OS Compatibility: OS independent; No software or drivers required
Features: Compatible with most 3.5in StarTech.com SATA hard drive docking stations and duplicators.
Supports 40-pin (3.5in) and 44-pin (2.5in) IDE hard drives.
Mounting holes for both 2.5in and 3.5in form factor IDE hard drives.
Large capacity hard...
Features: Unique bi-directional SATA – IDE converter
Supports 3.5-inch SATA and IDE (ATA) hard drive
Supports 5.25-inch SATA and IDE (ATA) optical drives
Power-On and HDD-Activity LED indicators
Ultra low power consumption
Connectors: one IDE (ATA) connector, one SATA host connector (Yellow), one SATA device connector (Black) and one 4-pin FDD power connector
Two independent Ultra ATA channels with 128/256 bytes buffer per channel
Driverless. No driver is needed
Serial ATA Interface
Complies with SATA 1.0a specification
Supports SATA Generation 1 with transfer rate up to 1.5Gbps (150MB/s)
Supports Spread Spectrum in receiver
Supports SATA power saving mode: Partial and Slumber
IDE (ATA) Interface
Complies with ATA Specification
Complies with Ultra ATA 133 with transfer rate up to 133MB/s
Supports PIO mode o, 1, 2, 3, 4, 5, 6, MDMA mode 0, 1, 2 and Ultr...
Specifications: The serial ATA to IDE converter allows standard parallel ATA hard disk drive, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc, to be used with serial ATA PCI cards or motherboards with serial ATA port and meet the specification of Serial ATA 1.0 interface.
Features: Compliance with Serial ATA Gen 1.0.
Master/slave device emulation support.
Support PIO mode 0~4.
Support Ultra DMA mode 0~7.
Support UDMA data transfer rates of up to 150MBps
Support ATAPI Packet command set.
Support 48-bit LBA addressing.
Support additional ATA command for serial ATA SCR access.
Serial ATA power save mode supported.
Serial ATA BIST operation.
Package Contents: Serial ATA to IDE Converter
Specifications: Suitability: All SATA devices
Interface: 7 + 15 pin SATA
OS Compatibility: Windows 98SE/ME/2000/XP/Vista
Features: SATA to IDE Bridge Board
Convert all SATA devices to IDE
Support all SATA devices (H.D.D./DVD/CD-ROM, etc.)
Data transfer rate up to 3.0 Gbps
Two LED indicators for "power on" (green) and "HDD" (Red)
1 x 40 pin IDE connector for host connection
1 x 7+15pins Serial ATA port for SATA hard drive
1 x 4-pin power connector
Features: Converts IDE connector for Serial ATA Drive
Compatible with Ultra ATA 100/133 with Data transfer rate up to 1.5 Gbps (150 MB/s)
No Driver required
Supports SATA devices such as CD/DVD Drives, CD/DVD Burners....)
Supports up to 2 channels & 2 devices
With no Jumpers, makes it easy for configuration
Specifications: • Standard 2.5" SATA storage device form factor (100.2mm x 69.9mm x 9.8mm)
• LED indicators: Power On, Card Detect, and Disk Activity
• Can be a primary bootable device containing the OS and applications (depends on CF card specifications)
• Transparent to operating system and does not require any drivers
• Supports Microsoft Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit and Linux operating systems
• Powered by 7-pin SATA connector (SATA mode), or by USB connector (USB mode)
• Supports external application as removable USB mass storage device (USB mode)
• 7+15 pins SATA data and power male connector
• Complies with Serial ATA 1.0a specification
• Supports SATA II (3.0Gbps) host interface
• Supports SATA hot swap (depends on SATA host controller specification)
Specifications: Detects and erases HPAs: Detection always indicated by LED. Handled according to configuration settings.
Detects and erases DCO: Detection always indicated by LED. Handled according to configuration settings.
Switch Guard: Yes
2.5" and 3.5" SATA drives
3.5-inch PATA (IDE) drives
Compatible (via adapters) with 1.8" ZIF drives (Toshiba/Hitachi), 1.8" drives (Toshiba), and 2.5" IDE / PATA drives.
Operating System Compatibility for erasure:
Operating system not required for erasure.
Drive eRazer operates as a stand-alone device and will erase disks from any operating system.
Operating System Compatibility for dock use:
Windows 7, XP, Vista Macintosh OS X
Linux distributions that support USB 2.0
Data speeds: Speeds vary depending on the drive model and type. Modern drives operate at 7GB/min.
Operating Humidity: 5%...
Specifications: Supports any type of SATA150 Device (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk)
48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
Mini Board size (75mm x 26mm), No space wasted
Compliant with Serial ATA 1.0a specifications
Supports Spread Spectrum in receiver
Compliant with ATA specifications
Compatible with Ultra ATA 133 / 100 / 66 / 33
100% hardware bridge converter to support PC, MAC and Linux environment
Features: Convert High Capacity SATA Hard Drive and SATA Storage Device to operate with IDE Host Controller!
Attaches this Mini size Dangle board to the back of all types of Serial ATA Devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO)and make them become IDE Device to work with IDE host Controller.
This Ultra ATA-To-1 Port Serial ATA Converter is the solution for converting a Serial ATA device....
Specifications: IDE Modes Supports master and slave drives
Connector A 1 - IDE 40 pin Male
Connector A 1 - SATA Power Female
Connector A 1 - SATA Data 7 pin Female
Connector B 1 - LP4 Female
Connector B 1 - LP4 Male
Maximum Transfer Rate 133MB/sec
Connector Types 1 - LP4 Male
Connector Types 1 - LP4 Female
Connector Types 1 - IDE 40 pin Male
Connector Types 1 - SP4 Male
Connector Types 1 - SATA Data 7 pin Female
Connector Types 1 - SATA Power Female
Features: 48 bit addressing supports larger capacity drives
Compatible with Ultra ATA 133 specifications
Complete hardware solution, no software needed. Works with PC, MAC, and Linux.
Serial ATA 1.0 compliant
Simple Plug and Play installation
Supports all types of SATA storage devices.
This all in one solution includes the appropriate power cables to convert your SATA power connect...
Specifications: Ports: 2
Interface: Mini SATA
Bus Type: PCI Express
Card Type: Standard Profile (LP bracket incl.)
Port Style: Integrated on Card
Serial ATA 3.0 specification
PCI Express 2.0
Chipset ID: Marvell - 88SE9230
Type and Rate: SATA III (6 Gbps)
Port Multiplier: Yes
LBA support: 48-bit
Supported RAID Modes:
JBOD - (Just a Bunch of Disks)
RAID 1 (Mirrored Disks)
RAID 0 (Striped Disks)
Max Drive Capacity: Currently tested up to 4TB per drive
OS Compatibility: Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64)
Windows Server® 2012, 2008 R2, 2003
Mac OS® 10.6 and up (Tested up to 10.10)