Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: Interface: IDE to SATA
Cable Length: 18.11" (460mm)
Features: Converts IDE Devices (Hard Drive, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc…) to Serial ATA Connection
Supports ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, and IDE Devices
Compliant with ATA Specifications
Compliant with Serial ATA Gen 1.0
1 IDE Input Port
1 SATA Output Port
Features: Unique bi-directional SATA – IDE converter
Supports 3.5-inch SATA and IDE (ATA) hard drive
Supports 5.25-inch SATA and IDE (ATA) optical drives
Power-On and HDD-Activity LED indicators
Ultra low power consumption
Connectors: one IDE (ATA) connector, one SATA host connector (Yellow), one SATA device connector (Black) and one 4-pin FDD power connector
Two independent Ultra ATA channels with 128/256 bytes buffer per channel
Driverless. No driver is needed
Serial ATA Interface
Complies with SATA 1.0a specification
Supports SATA Generation 1 with transfer rate up to 1.5Gbps (150MB/s)
Supports Spread Spectrum in receiver
Supports SATA power saving mode: Partial and Slumber
IDE (ATA) Interface
Complies with ATA Specification
Complies with Ultra ATA 133 with transfer rate up to 133MB/s
Supports PIO mode o, 1, 2, 3, 4, 5, ...
1 x 40 pin IDE port
2 x 4 pin Serial ATA port
1 x 4 pin power port
SATA to IDE / IDE to SATA Converter
Features: Convert IDE (Standard Parallel IDE) to SATA interface and enable SATA hard disk to be installed with this converter cable
May also convert SATA (Serial ATA) to IDE interface, enable the IDE hard disk to be installed
Bidirectional IDE to SATA Converter
Compliant with Serial ATA (SATA) Specification
Supports ATA 100/133
Support Windows 98 / SE / ME/ 2000 / XP / Vista / WIN 7 / Mac OS 8.6 and above
Mini board size, no space wasted
1 x 40 pin IDE connector for host connection
1 x 7+15pins Serial ATA port for SATA hard drive
1 x 4-pin power connector
Features: Converts IDE connector for Serial ATA Drive
Compatible with Ultra ATA 100/133 with Data transfer rate up to 1.5 Gbps (150 MB/s)
No Driver required
Supports SATA devices such as CD/DVD Drives, CD/DVD Burners....)
Supports up to 2 channels & 2 devices
With no Jumpers, makes it easy for configuration
Specifications: Supports any type of SATA150 Device (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk)
48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
Mini Board size (75mm x 26mm), No space wasted
Compliant with Serial ATA 1.0a specifications
Supports Spread Spectrum in receiver
Compliant with ATA specifications
Compatible with Ultra ATA 133 / 100 / 66 / 33
100% hardware bridge converter to support PC, MAC and Linux environment
Features: Convert High Capacity SATA Hard Drive and SATA Storage Device to operate with IDE Host Controller!
Attaches this Mini size Dangle board to the back of all types of Serial ATA Devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO)and make them become IDE Device to work with IDE host Controller.
This Ultra ATA-To-1 Port Serial ATA Converter is the solution for co...
Specifications: Chipset ID: Sunplus - SPIF223A
1 - SP4 (4 pin; Small Drive Power) Male
2 - SATA (7 pin; Data) Plug
Host Connectors: 1 - IDE (40 Pin; EIDE/PATA) Female
Type and Rate: SATA I (1.5 Gbps)
OS Compatibility: OS independent; No Software or drivers required
Dimensions: 1.8" x 0.4" x 2.1" W x H x L
Weight: 0.4 oz.
Features: Compliant with SATA specification 1.0
Supports Ulta ATA 100/133 PATA (IDE) controllers
No driver/software installation required
Specifications: The serial ATA to IDE converter allows standard parallel ATA hard disk drive, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc, to be used with serial ATA PCI cards or motherboards with serial ATA port and meet the specification of Serial ATA 1.0 interface.
Features: Compliance with Serial ATA Gen 1.0.
Master/slave device emulation support.
Support PIO mode 0~4.
Support Ultra DMA mode 0~7.
Support UDMA data transfer rates of up to 150MBps
Support ATAPI Packet command set.
Support 48-bit LBA addressing.
Support additional ATA command for serial ATA SCR access.
Serial ATA power save mode supported.
Serial ATA BIST operation.
Package Contents: Serial ATA to IDE Converter
Specifications: Connector A: 40 POS. Socket (Female)
Connector B: 4 Pin (Female)
Connector C: 7 Pin SATA Straight (Male)
Connector D: 4 Pin (Male)
System Requirements: Supports any operating system when a PC with available IDE hard disk and SATA controller are used
Features: Easily connect IDE/ATA Drives to a SATA Controller
Compliance with Serial ATA Gen 1.0
Master/slave device emulation support
Supports PIO mode 0 - 4
Supports Ultra DMA mode 0 - 7
Supports UDMA data transfer rates of up to 150MBps
Supports ATAPI Packet command set
Supports 48-bit LBA addressing
Supports additional ATA command for serial ATA SCR access
Serial ATA power save mode supported
Serial ATA BIST operation
Package Contents: Serial ATA to IDE Converter x 1
Serial ATA Cable x 1
1 x 40 pin IDE connector for host connection
1 x Slim SATA port for SATA device
1 x 4-pin Molex power input connection
Features: Connect any type of SATA 1.5Gbps or 3Gbps slim devices through Standard 40-pin IDE connection
Ideal for Rack Mount System, Server, Network Attached Storage and Mini ITX
Mounting frame and screws included
Hot swappable SATA connection
Support SATA II 3.0Gbps Speed
Supports Blu-ray slimline optical drives
Sata Power save modes
Supports IDE Master, Slave, and Cable select modes by jumper setting
OS Independent hardware bridge converter support any OS, no Driver required
SATA to USB 2.0
3.5"& 5.25"IDE to USB 2.0
2.5"IDE to USB 2.0
Dimensions: 70 x 43 x 10 mm
Cable Length: 92cm (36in)
Features: Transfer Rates Up to 12Mbps With USB 1.1
Transfer Rates Up to 480Mbps With USB 2.0
Easily add storage to any system with USB
Currently supports up to 2 TB
Supports LBA-48 Addressing
Hot-swappable: Plug and play without rebooting!
Package Contents: SATA/IDE to USB 2.0 Adapter
ATA 33/66/100/133, SATA 1.0
Any OS that supports ATA and SATA
7-pin female SATA data connector
4-pin power connector
40-pin IDE female connector to IDE device
Power Consumption 78 mA
Temperature -20ºC to 60ºC (-4ºF to 140ºF)
Humidity 0~90%, Non-Condensing
Certification FCC, CE
Features: Connect any IDE CD, DVD or hard drive device to an available Serial ATA port
Use your current IDE device on new SATA motherboards
Utilizes Serial ATA 1.0 and hot-pluggable technology
Master/slave hard drive emulation supported
Supports PIO mode 0~4 and Ultra DMA mode 0~7
Supports ATAPI Packet command set, and 48-bit LBA addressing
Supports additional ATA commands for serial ATA SCR access
Power save mode built-in
Serial ATA Built In Self Test (BI...
Specifications: Length: 8 inch
Conductor:20AEG Bare Copper
Connector A: Molex 4-pin LP4 Male
Connector B: Molex 4-pin (LP4) Female + SATA 15-pin Female w/ latch
Features: Compatible with both 2.5"" and 3.5"" Serial ATA Hard Drives
Be used for powering a SATA drive from a 4 pin molex ( LP4 )connection on the computer power supply
4 Pin Molex(LP4) to SATA power (15 pin) converter adatper,or just be used as a Molex 4-pin power extension cord
Support SATA 3.0 ( SATA III) 6 Gbps data throughput,Backwards compatible with SATA 1.5Gbps and SATA 3Gbps ( SATA I and SATA II)
- This Item fits in Standard 5.25 inch Driver Bay and may not fit in chassis with customized Bay . Please ensure the 5.25 inch Driver Bay of your computer is standard size before ordering this item.
- 1x 3.5 - inch Drive and 1x 2.5 - inch Drive could Mounted to this ITEM at the Same Time. However Mounting only ONE drive is recommended for heat dissipation.
What's in the Box
1 x ORICO AC52535-1S
4 x Rubber Washer
8 x M3 Mounting Screws for ORICO AC52535-1S
4 x M3 Mounting Screws for 2.5-inch Hard Drive or SSD
4 x #6-32 Mounting Screws for 3.5-inch Hard Drive or SSD
Features: 2mm Anodized Aluminum Bracket
Fit in 5.25 inch Drive Bay and allow to Mount 1x 3.5 - inch Drive and 1x 2.5 - inch Drive
Compatible with any 2.5 or 3.5 inch IDE,SATA or SAS Hard Drive and Solid State Disk
4x Rubber Washer...
Model #: ORICO AC52535-1S
Item #: 0VE-000W-00007
We’re sorry, there are no items that match your selections. Please adjust your selections to try again.