Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: IDE to CF Adapter Card with a PCI Bracket
Features: For any computer case , mini computer, embedded system, iPC and Rackmount case
PCI Mounting bracket
Powered by a SP4 connector or 44 pin IDE connector
Push bottom ejector on board
Supports 40 pin & 44 pin IDE connectors
Supports CompactFlash cards (Type I & II) or a IBM Microdrive
Supports jumper for master and slave setting
The CF card can be the primary bootable device containing the OS and application
Transparent to the operating system and does not require any drivers
Operating Systems Supported: Windows 8
Windows 7 32/64-bit
Features: Chipset: Marvell 88SE9120
Compliant with PCI-e Specification v2.0 and Backward Compatible with PCI-e 1.x
Compliant with Serial ATA Specification 3.0
Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
Hot Plug and Hot Swap (for SATA HD)
Supports Native Command Queuing (NCQ)
Supports Port Multiplier FIS Based Switching or Command Based Switching
Supports ATA and ATAPI Commands
Compatible with SATA 6G, 3G, and 1.5G Hard Drive.
Operating Systems Supported: Windows 98SE/ME/NT4.0/2000/XP/
Features: RoHS compliant
Compliant with specification, revision 2.2
Compliant with ATA/ATAPI-6 Specifications
Compliant with UDMA6 ATA/133 Specifications
Supports PCI 33 MHz with 32-bit data
Full backward support for Ultra ATA/100/66/33 standards
On-board flash BIOS for future upgrade
Supports Ultra DMA (0-6) and Multi-word DMA mode (0-2), and PIO mode (0-4)
CRC error-checking provides data verification and achieves flawless data transfer
Breaks the 137GB barrier! Supports various types of large capacity hard disk drives
Coexists with on-board IDE controller and allows you connect up to 4 IDE devices
Supports ATAPI devices including CD-ROM and CD-R/RW drives, and zip drives
Auto-detects drive typ...
Specifications: The serial ATA to IDE converter allows standard parallel ATA hard disk drive, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc, to be used with serial ATA PCI cards or motherboards with serial ATA port and meet the specification of Serial ATA 1.0 interface.
Features: Compliance with Serial ATA Gen 1.0.
Master/slave device emulation support.
Support PIO mode 0~4.
Support Ultra DMA mode 0~7.
Support UDMA data transfer rates of up to 150MBps
Support ATAPI Packet command set.
Support 48-bit LBA addressing.
Support additional ATA command for serial ATA SCR access.
Serial ATA power save mode supported.
Serial ATA BIST operation.
Package Contents: Serial ATA to IDE Converter
Operating Systems Supported: PC computer with one 32-bit PCI slot
MS Windows 98SE/Me/2000/Windows Server 2003/XP/NT 4.0/Vista/7/ Linux
Features: PCI Specification Revision 2.2 compliant
Silicon Image SIL 3512 host controller chip
Support 66 Mhz PCI with 32-bit data
Compliant with programming interface for Bus Master IDE Controller, Rev1.0
Support programmable and EEPROM, FLASH & EPROM loadable PCI class mode
Integrated SATA Transport, Link Logic & PHY layer
48-bit sector addressing
Serial ATA Specification Revision 1.0 compliant
Dual independent DMA channels with 256KB FIFO per Serial-ATA channel, transfer rate up to 1.5Gb/s.