Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: Software Requirement:
Windows Server 2003-2008
Mac 10.3 or later
Linux (AHCI system and BIOS preferred)
1 x PC/laptop with SATA / USB interface (SATA III / USB 3.0 interface preferred)
Dimensions: 1.00" x 3.60" x 5.50" (H x W x L)
Weight: 0.23 lb.
Features: Complies with Serial ATA Specification Rev 3.1
Supports SATA III, SATA II, and SATA I operation
Complies with USB 3.0 Specification Rev 1.0
Supports USB Super-Speed, High-Speed, Full-Speed operation
Support USB 3.0 / USB 2.0 power saving mode
Complies with USB Mass Storage Class Bulk-Only Transport Specification Rev 1.0
Complies with USB attached SCSI protocol Specification Rev 1.0
Standard 2.5" SATA storage device form factor (100mm x 70mm x 7mm)
Transparent to OS and does not requi...
Specifications: Bus Type: USB 3.0
Chipset ID: Asmedia 1053E
Number of 2.5 inch bays: 1
Host Connectors: 1 - USB 3.0 Micro-B (10 pin; SuperSpeed) Female
Drive Connectors: 1 - SATA Data & Power Combo (7+15 pin) Receptacle
UASP Support: Yes
Type and Rate:
- USB 3.0 - 5 Gbit/s
- SATA III (6 Gbps)
Power Adapter Included: USB-Powered
LED Indicators: 1 - Power/Activity LED
Features: Supports drives 7mm in height
Supports USB Attached SCSI Protocol (UASP)
Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives
Powered directly from the USB port
Compatible with USB revision 3.0/2.0/1.1 (5 Gbps/480 Mbps/1.5 Mbps)
Power/Activity LED indicator
Plug-and-Play and Hot-Swap compatible
Operating Systems Supported: Microsoft Windows® XP, Vista, Windows 7, Windows 8, and Windows 8.1
Optical drive for Windows driver installation
OS®X 10.8.2 or later for driverless install.
May be able to be used with OS X versions back to 10.7.5 if a generic USBXHCI open source USB 3.0 xHC driver is utilized.
Features: Adds four SuperSpeed USB 3.0 ports each with up to 5Gb/s (600MB/s) data rate – up to 10x faster than USB 2.0.
Power USB devices or charge them without needing an AC adapter... each port provides 900mA of power.
USB 2.0/1.1 backward compatible... works with legacy USB devices.
Hot swap capable... add/detach devices without rebooting.
Plug and Play with Macs... no drivers to install.
Compatible with UASP (USB Attached SCSI Protocol) enclosures for faster data rate...
Mobile Rack Drives Support: 1 x 3.5" Drives to 5.25" Bay
Mobile Rack Interface: SATA I/II/III
Features: Supported Drive Type
3.5" SATA or SATA II or SATA III hard drive
SATA (standard interface)
IDE (requires additional ADSAIDE converter board)
USB 3.0/2.0 (requires additional ADSAU3 converter board)
SCSI (requires additional ADSALVD160 converter board)
SATA - DOS, all Windows OS, Mac OS X, Linux and Solaris
USB - Windows 98SE, ME, 2000, XP, server 2003, Vista, Windows 7, Mac OS X and above, Linux kernel 2.4 and above, Solaris X and above
IDE - any OS
SCSI - All Windows OS
Dimensions: 7.25 x 5.75 x 1.70 in. (184.15 x 146.05 x 43.18 mm.)
Supports any 3.5" SATA I, II or III hard drives
Hot swap hard drive like tape cassette without restarting your system*
Choice of internal or external model
Features: Optical Drive Type:No
Graphics Memory Accessibility:Shared
Number of Processors Supported:2
Number of Total Expansion Slots:6
QuickPath Interconnect Supported:Yes
Controller Type:Serial ATA
Serial Attached SCSI (SAS)
Maximum Memory:384 GB
Graphics Memory Technology:DDR3 SDRAM
Graphics Memory Accessibility:Shared
Ethernet Technology:Gigabit Ethernet
Total Number of USB Ports:5
Features: Fitting for 2.5" or 3.5" HDD/ SSD into 5.25" drive bay
Work with 3.5" internal card reader or USB hubs
Works with IDE, SCSI, or SCA drives
Eight screws included for mounting the bracket into the PC case