Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Features: Powered by a 1.5Ah Lithium Ion battery for fade free power, less weight and 3x the total battery life of traditional batteries
Dual position handle converts from straight to pistol grip for maximum flexibility
Spindle lock for manual screw tightening
1/4" hex chuck allows for quick and easy bit changes
Built-in LED light illuminates the work surface
Compact and lightweight- only 10.55" in length and weighs less than 1 lb
Overload and over-discharge circuit protection for higher durability
21+1 clutch settings for precision and control based on the application
Easy to use forward/reverse switch to change bit direction
Includes:
(2) 1.5Ah 3.6V Lithium Ion Batteries (326263)
Quick Charger (UC3SFL)
Phillips Bit (992671)
Case
Features: Powered by a 1.5Ah Lithium Ion battery for longer total battery life, lighter weight and a steady level of power throughout the charge
Variable speed dial allows the user to control the ideal speed from 5,000 to 35,000 RPM
Compact and lightweight- a mere 8-3/16" in length and 1.06 lbs to fit into tight spaces
Built-in LED light for superior visibility even in the darkest workspace
Innovative anti-vibration system for increased comfort and total control
Slim soft grip handle increases comfort and reduces fatigue
Low battery indicator light warns the user when run time is getting low
Short charge time- just 40 minutes for more productivity
Collet Chuck Capacity: 1/8"
No-Load Speed: 5,000-35,000 RPM
Battery Amp Hour: 1.5
Charging Time: 40-Minute
Variable Speed Dial
LED Light...
Features: * Fuel rod is for use with Hitachi nailers only
* Works with NR90GC and NR90GR (2750-5700)
* Contains butane, propane, and propylene
* 1,200 nails per fuel rod
* 2.7 fl oz
* 2 per pack
Features: * 1,010 watts maximum output high-power motor
* Excellent overload durability
* Compact and lightweight
* Easy-to-use slide switch
* Low operating noise
* Prolonged service life of the carbon brushes
* Includes one depressed center wheel, one side handle, and one wrench
* 4-1/2" wheel diameter
* 7/8" hole diameter
* 650 watts power input
* 120 volts, 5 amps
* 11,000 per minute no-load speed
* M14 x 2 spindle thread
* 10" overall length
* 3.3 lbs
Features: * Finish nailer
* Selective actuation allows the user to select bump fire or contact fire modes
* Elastomer grip adds comfort and prevents slippage
* Visual nail reload indicator located on the magazine alerts the user when nail quantities are low so that blank drives are avoided
* Easy to clear nose for quick and simple nail extraction should a nail jam during use
* Narrow nose piece allows for nail placement in hard to reach areas and corners
* Depth of drive dial allows the user to easily adjust the drive depth for a professional finish
* No mar tip on the nose protects the work piece from unintended markings
* 360° adjustable exhaust port keeps dust, debris and oil off the finished project
* Lightweight aluminum body and composite magazine provide a tool that reduces user fat...
Features: * Lightweight and compact for easy use in tight spaces
* 360º adjustable exhaust, can be directed away from user in any direction
* High-capacity magazine, holds up to 130 staples for maximum efficiency
* Tool-less, easy-to-clear nose, for quick and simple staple extraction
* Tool-less depth of drive, adjusts for flush or countersunk drives into varying material providing control and customization
* No-mar tip included to prevent work surface damage
* Elastomer grip adds comfort and security
* Includes safety glasses, hex bar wrenches, carrying case, and air fitting
* 1/4" narrow crown fastener
* Straight magazine angle
* 1/2" to 1-1/2" fastener length capacity
* 18 gauge fastener diameter range
* 1/4" air inlet
* 70 to 120 psi operating pressure
* 2.4 lb...
Features: * Powerful 11 amp, 2-1/4 HP motor provides power to rout smoothly through hardwoods
* Tool-less 2-stage motor release clamp for quick and accurate depth adjustments
* Extremely low noise level, only 80 dB
* Nickel-plated housing for smooth cutting depth adjustment
* Electric speed control maintains constant speed even under load for smooth routing
* Aggressive, ergonomic design for an enhanced look and feel
* Includes one 1/2" and one 1/4" collet chuck, one 23mm and one 16mm wrench, one template guide adapter, and one template guide centering adjuster
* 120 volts
* 8,000 to 24,000 per minute no-load speed
* 3.3 lbs
Features: * Disc design sander polisher
* Heat resistant bearing chamber and iron ball bearings to extend tool life and durability
* Three electronically controlled devices include constant speed control, soft start, and two way variable speed controls on both the trigger and dial for flexibility and ease of use
* Includes loop handle, hook and loop pad, 8mm hex bar wrench, bolt washers, and hex socket HD bolt
* 0-600/3,400 rpm no load speed
* 5/8-11" spindle thread
* 11 amps
* 7" pad
* 10-19/32" length
* 6.2 lbs
Features: * Powerful 1,950W, maximum output and 1,520W power input motor
* Large table for increased material stability
* Thumb actuated positive stops, 0 degree, 15 degree, 22.5 degree, 31.6 degree, and 45 degree right and left, for quick and easy miter adjustments
* Adjustable pivot fence for supporting large stock
* Dust guide to prevent chips from scattering
* Soft and vibration-reducing grip
* Spindle lock for easy blade replacement
* Laser guide system for easier alignment with the ink line
* 10"
* Lightweight design 26.5 lbs
Features: Laser Marker System for exact alignment and predictable blade placement
15 Amp motor 1,950 Watts of max output power for the toughest cutting jobs
Micro bevel adjustment for fine tuning bevel angles
Horizontal handle with soft, vibration reducing elastomer grip adds comfort and control
Large pivoting fence raises fence height to 5-1/8" for cutting crown molding vertically
Carbon brush access, allows users to replace brush as needed to greatly prolong the life of the tool
Large table, provides material support
Thumb actuated positive stops, easy to use for quick miter adjustments
No-Load Speed (RPM): 4,000
Miter Angle Range: 0-52 Degrees Right & Left
Bevel Angle Range: -3 to 48 Degrees Left
Laser Marker
Handle: Horizontal
Features: Ergonomically designed 6-1/2” Circular Saw
Soft elastomer grip for improved comfort and reduced fatigue
Electric brake for increased safety
Fan Cooled motor for increased run times and maximum power
Built in spotlight for improved visibility of cut line
Adjustable bevel angle up to 50 degrees for a variety of cuts
Includes (2) HXP Li-ion 3.0 Ah batteries and a cross compatible charger for charging batteries ranging from 7.2V-18 Volts and for Ni-Cd, Ni-Mh, and HXP Li-ion battery platforms
High power HXP Li-ion battery technology features extended run time, fade free power, 40% less weight and 3 times the power capacity of standard Ni-Cd/Ni-Mh batteries
No-Load Speed: 3,400
Cutting Depth at 90 degrees: 0 – 2-1/4"
Cutting Depth at 45 degrees: 0 – 1-9/16"
Soft Rubber Handle
Integrated Work Light
Ele...
Features: * Lightweight and well balanced
* Two-piece, black, steel magazine for replacement ease
* Open nose design allows for easy extraction of a jammed nail
* Comfortable rubber grip
* Hardened aggressive toenail push lever reduces wear
* Selective actuation, ANSI Compliant, allows for single actuation or contact actuation
* Full round-head, plastic strip collation
* 21º magazine angle
* 2" to 3-1/4" fastener length capacity
* .113 to .131 fastener diameter range
* 64 to 70 magazine capacity
* Top magazine loading
* 3/8" air inlet
* 70 to 120 PSI operating pressure
* .088 ft³ per cycle at 100 PSI air consumption
* Without depth adjustment
* 21-13/16" x 4-1/4" x 13-3/8"
* 7.9 lbs
Features: Lithium Ion HXP batteries with extended run time, fade free power, 40% less weight and 3 times the power capacity of traditional batteries
Constructed with triple seal design to protect from dust an debris generated during use- also protects from water waste when cutting into pipes
Ergonomic shape and slip/heat resistant grip for comfortable operation over extended periods of time
Fan cooled motor for optimum speed and added durability
Replaceable carbon brushes for longer tool life
Tool-less blade changing system for quick replacements and reduced downtime
Foot adjustment for depth-of-cut control and extended blade life
Reversible blade setting for reverse cutting
Universal charger included for batteries ranging from 7.2V-18V and for NiCd, NiMH, and Lithium Ion battery platforms
Batteries are backwards com...
Features: Pneumatic nail feed mechanism powers both the nail advance and return for consistent operation even in the harshest of conditions
Consumes 30% less air allowing for more productivity time per compressor cycle
30% faster bump firing speed for a rapid finish
30% less recoil for optimized kick back to propel nailer across the course
Constructed with all aluminum components for durability
Improved push lever design has integrated holes to expel excess tar and grime build-up
Two-piece push lever lower segment can be easily removed for maintenance or replacement
Three-point carbide insert on nose piece increases life and reduces wear
Improved rubber composite guard wraps the side-edge of the magazine and critical points on the tool body to endure harsh working conditions
Non-slip textur...
Features: * Lightweight and well balanced
* Two-piece, black, steel magazine for replacement ease
* Open nose design allows for easy extraction of a jammed nail
* Comfortable rubber grip
* Hardened aggressive toenail push lever reduces wear
* Selective actuation, ANSI Compliant, allows for single actuation or contact actuation
* Full round-head, plastic strip collation
* 21º magazine angle
* 2" to 3-1/4" fastener length capacity
* .113 to .131 fastener diameter range
* 64 to 70 magazine capacity
* Top magazine loading
* 3/8" air inlet
* 70 to 120 PSI operating pressure
* .088 ft³ per cycle at 100 PSI air consumption
* Tool-less depth adjustment
* 21-13/16" x 4-1/4" x 13-3/8"
* 7.9 lbs
LOADING...
