Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: Interface: IDE to SATA
Cable Length: 18.11" (460mm)
Features: Converts IDE Devices (Hard Drive, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc…) to Serial ATA Connection
Supports ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, and IDE Devices
Compliant with ATA Specifications
Compliant with Serial ATA Gen 1.0
1 IDE Input Port
1 SATA Output Port
Specifications: Includes 1 x Combined 7+15 pin SATA plus LP4 Power to SATA Cable
Connectors 1x SATA 7 pin Female Connector
Connectors 1x SATA 15 pin Female Connector
Connectors 1x LP4 Male Connector
Features: Mount a 2.5in SATA hard drive to any computer with an available 3.5in bay. This Serial ATA hard drive mounting kit allows you to install a 2.5in SATA hard drive in a 3.5in drive bay.
The 2.5in to 3.5in SATA hard drive mounting kit features a sturdy aluminum bracket, as well as a combined 7+15 pin SATA + LP4 Power to SATA cable - which helps simplify installation and reduce clutter within the computer case.
Specifications: SATA II 3Gbps Mini Adapter Board (size 75mm x 26mm)
Features: Convert the High Capacity SATA II 3Gbps and SATA 1.5Gbps devices, like Blu-ray Disc, optical drive, SSD, Hard Drive and SATA Storage Device, to work with IDE Host Controller
Supports any type of SATA II 3Gbps and SATA I 1,5Gbps Device (Blu-ray Disc, SSD, DVD, DVD-RAM, CD-ROM, CD-RW, Hard Disk)
Convert SATA Drive like a standard IDE/ATAPI Drive
48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
Compliant with Serial ATA 2.6
Support Jumper setting for IDE Master, Slave and Cable Select Modes
Tag Command Queuing (Max 32 entries)
SATA Power Save modes
ATA/ATAPI PIO mode data transfer
ATA/ATAPI UDMA data transfer rate of 150, 133, 100, 66, 44, 33, 25, 16.7 MB/s
ATA/ATAPI-7 Streaming feat...
Specifications: The serial ATA to IDE converter allows standard parallel ATA hard disk drive, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc, to be used with serial ATA PCI cards or motherboards with serial ATA port and meet the specification of Serial ATA 1.0 interface.
Features: Compliance with Serial ATA Gen 1.0.
Master/slave device emulation support.
Support PIO mode 0~4.
Support Ultra DMA mode 0~7.
Support UDMA data transfer rates of up to 150MBps
Support ATAPI Packet command set.
Support 48-bit LBA addressing.
Support additional ATA command for serial ATA SCR access.
Serial ATA power save mode supported.
Serial ATA BIST operation.
Package Contents: Serial ATA to IDE Converter
Specifications: Interface: USB 3.0
Supported Devices: IDE & SATA 1.5Gb/s, SATA 3Gb/s, SATA 6Gb/s SSDs, Hard Drives, CD/DVD/Blu-ray Drives
Drive Size: 2.5" & 3.5" & 5.25"
HD Capacity: Up to 3.0 TB
Power Supply: AC Adapter
Dimensions: 70 x 51 x 15 mm
Features: Compact And Lightweight Design For Easy Storage
Supports 2.5" & 3.5" SA TA or PATA(IDE) Hard Drives
Supports 5.25" Optical CD/DVD/Blu-ray Drives
Hot-Swappable: Plug & Play Without Rebooting
Package Contents: SATA/IDE To USB 3.0 Adapter, User's Manual, SATA Data Cable, 4-Pin to SATA Power Converter, Power Adapter
1 x 40 pin IDE port
2 x 4 pin Serial ATA port
1 x 4 pin power port
SATA to IDE / IDE to SATA Converter
Features: Convert IDE (Standard Parallel IDE) to SATA interface and enable SATA hard disk to be installed with this converter cable
May also convert SATA (Serial ATA) to IDE interface, enable the IDE hard disk to be installed
Bidirectional IDE to SATA Converter
Compliant with Serial ATA (SATA) Specification
Supports ATA 100/133
Support Windows 98 / SE / ME/ 2000 / XP / Vista / WIN 7 / Mac OS 8.6 and above
Mini board size, no space wasted
Specifications: IDE Modes Supports master and slave drives
Connector A 1 - IDE 40 pin Male
Connector A 1 - SATA Power Female
Connector A 1 - SATA Data 7 pin Female
Connector B 1 - LP4 Female
Connector B 1 - LP4 Male
Maximum Transfer Rate 133MB/sec
Connector Types 1 - LP4 Male
Connector Types 1 - LP4 Female
Connector Types 1 - IDE 40 pin Male
Connector Types 1 - SP4 Male
Connector Types 1 - SATA Data 7 pin Female
Connector Types 1 - SATA Power Female
Features: 48 bit addressing supports larger capacity drives
Compatible with Ultra ATA 133 specifications
Complete hardware solution, no software needed. Works with PC, MAC, and Linux.
Serial ATA 1.0 compliant
Simple Plug and Play installation
Supports all types of SATA storage devices.
This all in one solution includes the appropriate power cables to ...
Specifications: SATA 3.0 compatible with transfer rates up to 6 Gbps!
This external eSATA slot plate adapter adds two external eSATA ports to any serial ATA controller, and allows you to take the high speed of SATA outside your computer case.
Just install the adapter plate into an open I/O slot on your computer; it easily fits into any PC slot.
Then connect the cables to the serial ATA connectors on your motherboard or SATA controller card.
Then you'll be able to connect external SATA drives that use the new eSATA connector.
Features: Color: Nickel
Weight: 0.210 lbs.
Convert 2 internal SATA connectors to the new external SATA connectors.
Specifications: Connector A: 40 POS. Socket (Female)
Connector B: 4 Pin (Female)
Connector C: 7 Pin SATA Straight (Male)
Connector D: 4 Pin (Male)
System Requirements: Supports any operating system when a PC with available IDE hard disk and SATA controller are used
Features: Easily connect IDE/ATA Drives to a SATA Controller
Compliance with Serial ATA Gen 1.0
Master/slave device emulation support
Supports PIO mode 0 - 4
Supports Ultra DMA mode 0 - 7
Supports UDMA data transfer rates of up to 150MBps
Supports ATAPI Packet command set
Supports 48-bit LBA addressing
Supports additional ATA command for serial ATA SCR access
Serial ATA power save mode supported
Serial ATA BIST operation
Package Contents: Serial ATA to IDE Converter x 1
Serial ATA Cable x 1
1 x 40 pin IDE connector for host connection
1 x Slim SATA port for SATA device
1 x 4-pin Molex power input connection
Features: Connect any type of SATA 1.5Gbps or 3Gbps slim devices through Standard 40-pin IDE connection
Ideal for Rack Mount System, Server, Network Attached Storage and Mini ITX
Mounting frame and screws included
Hot swappable SATA connection
Support SATA II 3.0Gbps Speed
Supports Blu-ray slimline optical drives
Sata Power save modes
Supports IDE Master, Slave, and Cable select modes by jumper setting
OS Independent hardware bridge converter support any OS, no Driver required
External power supply: 100-240VAC +12V/+3V / +3.5A (included)
Power input: +12V DC input jack; 12-pin SATA power
Power output: +12V / +5V
Power switch: On / Off
HPA / DCO Detection
Power input active
Power output active
FireWire 800: up to 800 Mbps
FireWire 400: up to 400 Mbps
USB 3.0 port: up to 5 Gbps
eSATA port: up to 3 Gb
3.5" IDE / PATA drive
2.5" / 3.5" SATA drive
Windows 7, Vista, XP
Macintosh OS X
Linux distributions that support desired host connection
4 lbs. (including AC adapter)
4.3" x 2.95" x 0.87" (110mm x 75mm x 22mm) exclusive of attached plates, drives and cables
FCC, CE, RoHS
Features: UltraDock v5 allows you to connect a bare hard drive to...
SATA to USB 2.0
3.5"& 5.25"IDE to USB 2.0
2.5"IDE to USB 2.0
Dimensions: 70 x 43 x 10 mm
Cable Length: 92cm (36in)
Features: Transfer Rates Up to 12Mbps With USB 1.1
Transfer Rates Up to 480Mbps With USB 2.0
Easily add storage to any system with USB
Currently supports up to 2 TB
Supports LBA-48 Addressing
Hot-swappable: Plug and play without rebooting!
Package Contents: SATA/IDE to USB 2.0 Adapter