Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Feature: Studio boom arm for radio, broadcast, studio and home use
Provides full 360 degree rotation
Supplied with velcro cable wraps and both desk-clamp and desk-insert style attachments for versatile mounting in desks up to 55mm thick (clamp) or 70mm (insert)
Designed for the Rode Procaster and Podcaster
Supports most microphones weighting between 700g (1.5lb) and 1.1kg (2.4lb) when combined with shock mount
PSM1 shock mount sold separately
Feature: The RODE WS7 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones.
Designed to reduce wind noise when recording in adverse environmental conditions, the WS7 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area.
Suitable for the RODE NTG3 and any shotgun microphone with a maximum slot length of 186.5mm (7 1/4") and a diameter of 19-20mm.
Feature: Now featuring the Rycote Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Rode Blimp With Rycote Lyre Suspension System Features
- Rycote Lyre system instead of the old ‘band and ring'
- Revised, lighter handle
- Mogami cable with Neutrik/Switchcraft connectors
- Weight: 1.21 lbs. (550 grams)
- Dimensions (H x W x D): 11.25 x 19.25 x 4.9 inches (285.00 x 490.00 x 125.00mm)
The RØDE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2 and NTG3 microphones, as well as any third party shotgun microphone up to 325mm (12 3/4”) in length.
The Blimp's handle has also been completely redesigned, reducing t...
Specification: Weight: 200.00gm
Dimensions: 215.00mmH x 65.00mmW x 95.00mmD
Feature: The RØDE PG2 Pistol Grip Shock Mount is designed to reduce handling noise when recording with shotgun microphones.
It supports microphones with a diameter of 19-20mm or 21-22.5mm using the supplied interchangeable mounts, and a handy release lever on the mount allows for quick and easy adjustment of the microphone angle.
Cable management is an integral design feature of the PG2 pistol grip, with the cable running through the handle assembly to minimise any handling noise or clutter. Additional cable security is provided on either side of the rubber shock mount.
The PG2 can be operated by hand or attached to a boompole via the 3/8" thread attachment at the base.
Feature: The SM4 suspension shock mount gives you the ability to isolate the microphone from external physical factors that may cause unwanted rumble and vibrations in the microphone.
The SM4 attaches to any 3/8" or 5/8" threaded microphone stand.
Sensitivity: -42.0dB re 1 Volt/Pascal (8.52mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Specification: Acoustic Principle: Pressure Gradient
Polar Pattern: Cardioid [Paired cardioid capsules in X-Y stereo pattern]
Address Type: End
Frequency Range: 20Hz - 20kHz (selected HPF @ 0)
Maximum SPL: 120dB SPL (@ 1kHz, 1% THD into 1KO load)
Equivalent Noise Level (A-weighted): 18dB-A
Feature: The RØDE i-XY is the ultimate recording microphone for iPhone and iPad. With up to 24-bit/96k* recording and on-board high-fidelity A/D conversion, your i-XY recordings are rich, smooth and accurate.
At the heart of the i-XY is a matched pair of 1/2" cardioid condenser capsules, fixed in a perfect 90 degree 'near-coincident' alignment. This results in immersive and true-to-life stereo recordings, captured in incredibly high deta...
Feature: The RØDE WS6 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones.
Designed to reduce wind noise when recording in adverse environmental conditions, the WS6 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area.
Suitable for the RØDE NTG1 and NTG2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.
Specification: Weight: 396.00gm
Dimensions: 844.00mmH x 33.00mmW x 33.00mmD
Feature: The RØDE Micro Boompole provides ultimate boom pole performance in a convenient and portable size.
Intuitive twist locks allow the Micro Boompole's three sections to smoothly extend to 2063mm (6-3/4'), while the ergonomic grip provides comfort during use.
Feature: The PG1 Cold Shoe Pistol Grip is a convenient and ergonomic way to operate your RØDE VideoMic, Stereo VideoMic or other
cold/hot shoe compatible device independently of your video camera.
A convenient 3/8" thread on the base allows connection to a boompole or microphone stand, while the spine features handy
Feature: The Dead Kitten windshield is designed for minimising any wind noise when using a microphone in high wind conditions.
Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.