Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: 22-pin SATA and power combo connector (same as 2.5" SATA hard drive)
SATA Hot-swappable support when connected to SATA port supporting such feature
Maximum transfer rate: 6 Gbps. Actual speed depends on the speed of the mSATA SSD
1 mSATA card connector plus two mounting poles
Dimensions: same as 2.5" hard drive with 9 mm height - 69.85 mm (W) x 100.2 mm (L) x 9 mm (H)
Power: +5V from PC power supply
Maximum Current: ~50 mA at 5V
Features: Build your own 2.5" SATA SSD with mSATA SSD of your choice
Replace 2.5" hard drive with low power and shock resistant mSATA SSD
Direct Notebook hard drive replacement
*Use as a 3.5" hard drive by using optional 2.5" to 3.5" drive adapter (model: AE25SN35SA)
mSATA flash Card can be the primary bootable device containing the OS and applications.
OS independent. No software driver r...
Specifications: 2.56in x .39in x 2.17in (W x D x H)
Features: Increase system overall performance using SSD while increasing overall system storage capacity with regular low cost hard drives.
HybridDrive mode enables 80 percent of the performance of a solid state drive (SSD) on any SATA hard drive at one-third the cost of SSD
HybridDrive Modes: Safe Mode (Mirrored Protection), Capacity Mode (Cost-Optimized)
Support HybridDrive (HDD+SSD), Hardware RAID0, RAID1
Port Multiplier Compatible
Hot swappable - drive can be removed and added without system shut down or restart **
Supports Native Command Queuing (NCQ)
Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
Install into both standard height or low profile system with included brackets
2 LED connections for drive activity
Includes both standard height...
Features: The Addonics Pocket UDD (Ultra DigiDrive) II is one of the fastest Readers/Writers for Flash media, PCMCIA hard drives and ATA Flash. Built on the same utilitarian concept of its predecessor Pocket UDD, the Pocket UDD II supports maximum throughput of 150 Mbytes/sec via eSATA or the latest USB 3.0 connection, cutting almost half of the data transfer time between the new high speed media and the computer.
Package Contents: Pocket UDD (Ultra DigiDrive) II
3 Feet eSATAp Cable with Center Negative Power Tip
USB Power Cable
USB 3.0 eSATA Adapter
Specifications: Dimension: 5.75"D x 4"W x 1"H
Weight: 6.35 oz.
Features: Supports any 2.5" SATA hard drive (up to 14mm height) or SSD
Use 2.5" SATA hard drive or SSD as a direct replacement of 3.5" SATA hard drive
Can be install into any 3.5" removable hard drive system, Addonics Disk Array, Snap-In Mobile Rack, Diamond or Saturn drive kits.
Use it as a 2.5" removable drive system
Install into any standard 3.5" drive bay,
Hot swap hard drive like tape cassette without restarting your system*
SATA native interface - support SATA I, II or III standards
Point to point Serial ATA connection (no cable to connect hard drive to enclosure)
Convenient tool-less drive tray design for simple and secure installation of hard drive onto tray
Suspension mount to protect against vibration and shock
Ventilation slits for eff...
Features: Cable Type: SATA
Connector on First End: 2 x Female eSATA
Connector on Second End: 2 x SATA
Route 2 internal SATA ports to 2 eSATA ports to the back of Desktop system via one PCI slot.
Features: Choice of controller with 2 internal SATA II ports or 2 eSATA ports
Install into both standard height or low profile system.
Install in PCI-Express BUS
Fully compliant with SATA II and SATA 1.0 standard
Maximum 3Gbits/sec per port
Support NCQ commands
Compatibility with Port Multiplier
Silicon Image chip set SiI 3132