Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Feature: The RODE WS7 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones.
Designed to reduce wind noise when recording in adverse environmental conditions, the WS7 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area.
Suitable for the RODE NTG3 and any shotgun microphone with a maximum slot length of 186.5mm (7 1/4") and a diameter of 19-20mm.
Feature: The SM3 is a suspension shock mount with camera shoe adaptor for mounting various RODE microphones onto a camera via the standard hot/cold shoe mount.
This allows you to connect your RØDE Microphone to a number of video and DSLR cameras on the market while giving your camera maximum isolation from any handling vibrations.
Please note that an adaptor may be required for some cameras with proprietary mounts.
Feature: The SM4 suspension shock mount gives you the ability to isolate the microphone from external physical factors that may cause unwanted rumble and vibrations in the microphone.
The SM4 attaches to any 3/8" or 5/8" threaded microphone stand.
Feature: The SMR is a revolutionary shock mount for large diaphragm condenser microphones from RODE.
Featuring a unique double-Lyre suspension system, the SMR enhances the existing superior vibration cancellation of Rycote's Lyre system by using a smaller inner Lyre to act as a tensioning element. This maintains each Lyre in the neutral position where it is most efficient at cancelling vibration.
The SMR's removable all-metal pop filter is as effective as it is visually striking, providing an integrated solution for plosive protection that is easily washable and designed to last as long as the shock mount and microphone.
The clamping system of the SMR utilises a greater surface area for increased friction and weight handling, without the need for over-tightening of the locking thread. With the load distributed over a greater surface area, the clamping system is v...
Sensitivity: -42.0dB re 1 Volt/Pascal (8.52mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Specification: Acoustic Principle: Pressure Gradient
Polar Pattern: Cardioid [Paired cardioid capsules in X-Y stereo pattern]
Address Type: End
Frequency Range: 20Hz - 20kHz (selected HPF @ 0)
Maximum SPL: 120dB SPL (@ 1kHz, 1% THD into 1KO load)
Equivalent Noise Level (A-weighted): 18dB-A
Feature: The RØDE i-XY is the ultimate recording microphone for iPhone and iPad. With up to 24-bit/96k* recording and on-board high-fidelity A/D conversion, your i-XY recordings are rich, smooth and accurate.
At the heart of the i-XY is a matched pair of 1/2" cardioid condenser capsules, fixed in a perfect 90 degree 'near-coincident' alignment. This results in immersive and true-to-life stereo recordings, captured in incredibly high deta...
Feature: The Dead Kitten windshield is designed for minimising any wind noise when using a microphone in high wind conditions.
Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
Feature: The RODE Stereo Bar is a robust solution for mounting two microphones in a stereo array.
With clearly marked spacing of up to 20cm, as well as angle and measurement indicators for ORTF and XY positioning, the RODE Stereo Bar makes it quick and easy to achieve complex recording arrays.
The 5/8" mounting threads are supplied with accompanying spacing clips to allow for easy positioning for stacked arrays, and the robust ABS construction makes the Stereo Bar stable and durable, allowing it to easily support the weight of two large diaphragm microphones such as the RODE K2.
Specification: Weight: 396.00gm
Dimensions: 844.00mmH x 33.00mmW x 33.00mmD
Feature: The RØDE Micro Boompole provides ultimate boom pole performance in a convenient and portable size.
Intuitive twist locks allow the Micro Boompole's three sections to smoothly extend to 2063mm (6-3/4'), while the ergonomic grip provides comfort during use.