Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: IDE Device to Serial ATA Device.
ALL EIDE Type DVD / DVD-RAM / CD-ROM / CD-RW / HDD Become New Serial ATA Devices.
Attaches this Mini Dangle board to the back of all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO) and make them become new Serial ATA Devices and meet SATA standard.
OS Support: 100% hardware bridge converter to support PC (Windows98/SE/ME/2000/XP/ Vista), MAC OS 8.6~9.0 and Linux environment.
Features: Can Attaches to any type of ATAPI, ATA/133/100/66/33, EIDE and IDE storage devices (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk)
Mini Board size (59mm x 25mm), No space wasted
Compliant with Serial ATA 1.0a specifications and High transfer rate of 1.5Gbps
Supports Spread Spectrum in receiver
Compliant wit...
Features: Unique bi-directional SATA – IDE converter
Supports 3.5-inch SATA and IDE (ATA) hard drive
Supports 5.25-inch SATA and IDE (ATA) optical drives
Power-On and HDD-Activity LED indicators
Ultra low power consumption
Connectors: one IDE (ATA) connector, one SATA host connector (Yellow), one SATA device connector (Black) and one 4-pin FDD power connector
Two independent Ultra ATA channels with 128/256 bytes buffer per channel
Driverless. No driver is needed
Serial ATA Interface
Complies with SATA 1.0a specification
Supports SATA Generation 1 with transfer rate up to 1.5Gbps (150MB/s)
Supports Spread Spectrum in receiver
Supports SATA power saving mode: Partial and Slumber
IDE (ATA) Interface
Complies with ATA Specification
Complies with Ultra ATA 133 with transfer rate up to 133MB/s
Supports PIO mode o, 1, 2, 3, 4, 5, ...
Specifications: Color: Black
External Interface: USB 3.0 type-A connector
Device Support: 2.5", 3.5", 5.25" SATA and 2.5", 3.5", 5.25" IDE (Parallel ATA)
Dimensions: 86 x 64.5 x 18 mm
System Requirement: A Notebook or Desktop PC with USB 2.0/3.0 ports (USB 3.0 recommended), Microsoft Windows XP or above (32/64-bit)
Features: Easy to Install
Quickly adds more storage space to your USB-enabled PC (USB 3.0 recommended)
Compliant with USB 3.0 Spec
Supports USB Full-speed(12Mbps)/ High-speed(480Mbps)/ Super-speed(5Gbps)
Supports SATA or PATA DVD/ DVD-RAM /CD-ROM /CD-RW /HDD
No Driver Installation needed
Complies with Serial ATA Spec Revision 2.6
Supports USB Mass Storage class Bulk-only transport Revision 1.3
Support One Touch File Backup (FREE CloneDrive included)
Specifications: SATA II 3Gbps Mini Adapter Board (size 75mm x 26mm)
Features: Convert the High Capacity SATA II 3Gbps and SATA 1.5Gbps devices, like Blu-ray Disc, optical drive, SSD, Hard Drive and SATA Storage Device, to work with IDE Host Controller
Supports any type of SATA II 3Gbps and SATA I 1,5Gbps Device (Blu-ray Disc, SSD, DVD, DVD-RAM, CD-ROM, CD-RW, Hard Disk)
Convert SATA Drive like a standard IDE/ATAPI Drive
48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
Compliant with Serial ATA 2.6
Support Jumper setting for IDE Master, Slave and Cable Select Modes
Tag Command Queuing (Max 32 entries)
SATA Hot-plug
SATA Power Save modes
ATA/ATAPI PIO mode data transfer
ATA/ATAPI UDMA data transfer rate of 150, 133, 100, 66, 44, 33, 25, 16.7 MB/s
ATA/ATAPI-7 Streaming feat...
Specifications: Connector on First End: 1 x 7-pin Serial ATA/150 SATA
Connector on Second End: 1 x 40-pin IDC - Ultra ATA/133 (ATA-7) IDE
Dimensions: 3.00" x 1.00"
Package Contents: ADSAIDE Data Transfer Adapter
1 x Power Cable
User Guide
Specifications: External interface: 1 x USB 2.0
Internal interface: 7 + 15 SATA/ 3.5" IDE/ 2.5" IDE/ 1.8" IDE/ 1.8" ZIF
HDD drive type: 1.8"/ 2.5"/ 3.5"
Color: Black
OS:
Microsoft Windows 2000 or above (Windows 7)
Power Mac G5, MacBook Pro or Mac Pro with Mac OS 9.2 or higher
Features: Transfer rate of Hi-speed USB 2.0 interface can be up to 480Mbps (Max)
Complies with Gen1i/Gen1m/Gen2i & Gen2m of Serial ATA International
Support SATA 1.5G/3.0G Speed
Support 2.5"/3.5" SATA HDD
Support 2.5"/3.5" IDE HDD
Support 1.8" IDE/ZIF HDD
Support Plug & Play and hot-swap functions
Supports LEDS for power and SATA HDD link indication
Support One Touch File Backup.
Specifications: Color: hite & Green
Drive Fit: 2.5" / 3.5" SATA 1.5 / 3 / 6 Gbps hard drive; 2.5" / 3.5" IDE hard drive
Connection Interface: SuperSpeed USB 3.0
Transfer Rate: Up to 5 Gbps (depending on hard drive speed)
Structure: Plastic & Stainless Steel
LED Indication: Device Power & Drive Activity
LED Display Color: Power: Amber; Drive Activity: Amber flashing
Power ON / Off: Power Button
Dimension (L x W x H): 112 x 92 x 125mm
Weight: 300g
Features: Perfect hard drive adapter with docking station functionality in USB 3.0 speeds.
USB bus power for 2.5" drives.
Low profile power adapter for 3.5" drives.
Detachable docking platform to use while on the go.
Great for DIY users and IT Professionals.
Compatible with both 2.5" & 3.5" SATA hard drives and supports hot swap.
Compatible with both 2.5" & 3.5" IDE hard drive...
Specifications: External Interface: USB 3.0 type-A connector
Device Support: 2.5", 3.5", 5.25" SATA and 2.5", 3.5", 5.25" IDE (Parallel ATA)
Dimensions: 86 x 64.5 x 18 mm
Color: Black
Features: Easy to Install
Quickly adds more storage space to your USB-enabled PC (USB 3.0 recommended)
Compliant with USB 3.0 Spec
Supports USB Full-speed(12Mbps)/ High-speed(480Mbps)/ Super-speed(5Gbps)
Supports SATA or PATA DVD/ DVD-RAM /CD-ROM /CD-RW /HDD
No Driver Installation needed
Complies with Serial ATA Spec Revision 2.6
Supports USB Mass Storage class Bulk-only transport Revision 1.3
Support One Touch File
Type: Connector Types: 1 - LP4 Female
Connector Types: 1 - SATA Power Female
Connector Number: 4
Connector Detail: Connector A: 1 - SATA Power (15 pin) Plug
Connector B: 1 - SP4 (4 pin; Small Drive Power) Female
2 - LP4 (4 pin; Molex Large Drive Power) Female
Features: This LP4 to SATA Power Adapter Cable features an LP4 female connector as well as an SP4 female power connector and a SATA power connector, allowing you to connect an IDE hard drive as well as a floppy disk drive to a Serial ATA power connector provided by the computer power supply.
1 - LP4 to SATA Power Cable Adapter with Floppy Power
Specifications: Comes with Adapter and Cable (uses Pass-through Molex 5v12v Connector)
Features: Rockethead 100 Converts Current IDE interface to Next Generation SATA
This device allows users to connect ATA100 and ATA133 IDE hard disk drives to the Serial ATA controller. This converter is ideal for those who do not have Serial ATA hard disks, or want to avoid using multiple host adapters.
Specifications: Compatible with Ultra ATA 133 specifications.
Supports all types of SATA storage devices. (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk, ...)
Complaint with Serial ATA 1.0 specifications.
Supports Serial ATA Generation 1 tranfer rate of 1.5Gb/s.
Supports Spread Spectrum in receiver.
Male/Female Y Large Molex Power connector (8-inch length)
Features: Supports any type of SATA150 Device (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk, ?)
48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
Mini Board size (75mm x 26mm), No space wasted
Compliant with Serial ATA 1.0a specifications
Supports Spread Spectrum in receiver
Compliant with ATA specifications
Specifications: Chipset
Supports single Serial ATA device
Data transfer rate up to 1.5 Gbps (150 MB/s)
Expansion Slots
1 x 40 pin IDE connector for ATAPI hard drive
1 x Serial ATA port for host connection
1 x 4-pin power connector
Specifications: SATA Power Input to 3 x 4pin Output Molex Y Cable
5" in between 4pin Plugs
Features: This cable converts the power supply's 15pin SATA Plug connector to 4pin standard Molex connector, used for powering up the older ATA/IDE devices.
Features: Compatible With Ultra ATA 100/133 with Data transfer rate up to 1.5 Gbps (150 MBps)
Compliant With Serial ATA 1.0 Specification
Converts IDE to Serial ATA
No Drivers required
Supports ATAPI devices (CD/DVD drives, CD/DVD burners, etc... )
Supports up to 2 channels and 2 devices
With no jumpers, makes it easy for configuration
Features: Supports ATA 100/133
Supports Serial ATA Generation 1 transfer rate of 1.5 Gbps (150 MB/s)
Plug and Play, no drivers required
Compliant With Serial ATA 1.0 Specification
Compatible With Ultra ATA 100/133
Data transfer rate up to 1.5 Gbps (150 MB/s)
Support IDE drive size larger than 240GB
No driver is
Specifications: Jmicro JM20330 Chipset
Plug & Play and Hot-swapping capability
Automatic SATA 3.0/1.5 Gbps speed negotiation
Serial-ATA 1.0 specification compliant
ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133 and 150Mbps
Support ATA PIO and UDMA modes 0 to 4
Support 3.5" IDE hard drives and 5.25" optical drives
Ultra low power consumption
Master/Slave
Features: Complies with USB 2.0 standards
Backwards compatible to USB 1.1 Standards
High speed data transfer rates of up to 1500 Mbytes/sec
Supports IDE and enhanced IDE hand drives
Supports 16 bit DMA and Ultra DMA mode interface (Ultra 33/66/100/133)
Supports ATA/ATAPI CD-Rom/R/RW DVD-Rom/R/RW and more
Supports 3.5" IDE/2.5" & 3.5" SATA HDD and more
Support bisynchronous mode, compatible to SATA and IDE device simultaneously
Support 3.5 inch SATA/SATA II Hard Drive up to 750 GB
Supports IDE and enhanced IDE hard drives up to 500GB
Tested with Western Digital/Maxtor/Seagate/Hitachi SATA Hard Drive
Support PC/Mac OS/Notebook
OS requirement:
Support Win98SE, 2000, ME, XP, Mac OS 8.6 or higher
Win2000, ME, XP no driver needed
Features: Silicon Image SIL3611 bridge chip
One to One Serial ATA (SATA) to Parallel ATA interface adapter
Compliant with Serial ATA 1.0 specification
Supports data rate of 1.5Gb/s for Serial ATA mode transferring
Supports Ultra ATA 133/100
Support 3.5" IDE hard drive / DVD-ROM and 5.25" CDROM
Power-On and Read/Write access LED indicators
Integrated Serial ATA Link & PHY logic
48-bit sector addressing
One 40-pin female connector for ATA HDD/CD-ROM/DVD-ROM
One 4-Pin Power connector
No drivers needed
![StarTech Model LP4SATAFMD 4.7 in [12 cm] LP4 to SATA 15 Pin Power Adapter with Floppy Power](http://images10.newegg.com/NeweggImage/ProductImageCompressAll125/12-200-151-02.jpg "StarTech Model LP4SATAFMD 4.7 in [12 cm] LP4 to SATA 15 Pin Power Adapter with Floppy Power")
LOADING...
