- 1,200 - 2,500 RPM
- 101.6 CFM (Max.)
- Aluminum & Copper
Great product 11/27/2010
Phenom II X4 955 BE OC to 3.8 GHz: core temps 39C Idle, 51C under load, held steady after 15 minutes of Prime95 at lowest fan speed settings; temps dropped to 47C at max fan speed settings and held there at 20 minutes of prime95. Using both fans for "push-pull" configuration. Max core temp was 48C after a few hours of gaming. Also used Arctic Silver 5 thermal compound. At minimal fan speed settings, the fan(2x) noise were not noticeable over both of my chassis fans(ANTEC three hundred black chassis)
Annoyingly loud fans if you crank up the speeds to max. Will need to remove motherboard to install the cooler if your computer chassis/case doesn't have a hole cutout for rear access. Luckily, I'm using ANTEC three hundred black case, which has rear access.
Make sure your motherboard has two 3-pin power connectors if you plan on using both fans. The fan power & fan speed cords are neatly wrapped together with plastic mesh, but I ended up getting rid of the mesh wrap so that I could route the fan speed adjuster outside of the chassis through the side ventilation holes in my chassis.
5 people found this review helpful. Did you? Yes / No Thanks for the valuable feedback you provided!