- DDR3 1866 (PC3 14900)
- Timing 9-10-9-28
- Cas Latency 9
- Voltage 1.5V
- $39.99 39.99
- $36.99 –
- Save: $3.00 (8%)
- Free Shipping (restrictions apply)
G.Skill Sniper = Amazing 05/10/2012
Running these modules at stock voltage (1.5v)
Timings = 188.8.131.52.39-1T - Unganged @ 1894mhz
NB & HT running at just over 2430mhz.
Throughput is 15156mb/s in system memory benchmarks at this setting... I have no complaints whatsoever.
This is just a simple overclock that I've not messed around with more than five minutes. So, take that as you will as to the performance of these modules.
Reading these reviews makes me cringe. ALL memory above 1333mhz must be manually setup in BIOS. This is due to the limitations of different CPU's and motherboard manufacturers. It defaults to a lower speed and default timing so that your system will boot up. You can then input the correct timings and voltage that the manufacturer recommends for the specific modules.
If you want to grab these modules, you WILL have to set the timings manually.
Go into bios, set the speed to 1866mhz
go to the timings tab, enter the timings manually
CL - 9 clocks
tRCD - 10 clocks
tRP - 9
tRAS - 28
tRC - 39
Leave the other settings alone.
Go back to DRAM voltage and input the voltage for the modules 1.5v
Save and Exit bios.
If computer doesn't boot, or is unstable refer to G. Skill Tech Support.
In addition, depending on your CPU, you may need to raise the CPU-NB Voltage to stabilize the high frequency. Not all CPUs can natively support DDR3-1600+.
Hope this Helps. Highly recomm
78 people found this review helpful. Did you? Yes / No Thanks for the valuable feedback you provided!