- AMD A75 (Hudson D3)
- APU (FM2 Socket)
- DDR3 2600+(OC)/2400(OC)/2133(OC)/1866/1600/1333/1066
Slow and Broke 01/29/2013
Not many options for FM2 in mITX format. The WEFI firmware update function worked like a champ. Relatively easy to use.
The Motherboard was rather slow. It seemed to underclock the processor to 14x more often than desired. Then it died after 45 days.
It had been working fine (although slow) for a month and a half, on firmware 1.1, then I wanted to update the firmware to see if the performance improved. I did so, but performance did not improve. I turned the dehumdifier function on and rebooted, and everything was normal for a few hours. I put the machine to sleep, and woke up the next day and the system would not post. Took everything unessential out of the rig, still would not post. Switched PSU's (original was a seasonic, substitue was a coolermaster) and still nothing. Took it out of case, rinse and repeat, still nothing =(. I guess we will see what ASrock suppor has to say.
Dear AsRock Customer
We sincerely apologize for any inconvenience this may have caused you.
Please trouble shooting the mainboard for below steps with known good components;
Remove the mainboard from inside computer to outside. Place the mainboard on top of the empty mainboard’s box
Clear the CMOS
Reseat the CPU and heatsink fan as well
Test with 1 memory module
Using onboard Video (plug the monitor)
Power supply with connecting 24 pins + 4 pins ATX power to the mainboard
Plug the computer case’s power switch to mainboard's front panel power header and try again
If you have any technical questions please contact us at http://www.asrock.com/support/tsd.asp. We can assist you shortly.
Tech Support Email: firstname.lastname@example.org
1 people found this review helpful. Did you? Yes / No Thanks for the valuable feedback you provided!