- 0.6mm SECC MicroATX Mini Tower
- USB 3.0 x 1; USB 2.0 x 2; HD/AC'97 Audio Front Ports
- 3 External 5.25" Drive Bays
- $84.99 84.99
- $74.99 –
- Save: $10.00 (12%)
- $9.99 Shipping (restrictions apply)
Great Case. 06/04/2013
This review is from: IN WIN Dragon Slayer Black 0.6mm SECC MicroATX Mini Tower Computer Case
This is my first case from IN WIN and so far it has been great, I like the fact that it is painted inside and out, has a back cut out for the MOBO, plenty of wire management holes, tool less design all in small great looking package. I crammed a lot of fans into this case, the rear exhaust fan is replaced with a Noctua 92mm fan, Front panel is being used as an exhaust fan with a Cougar 140mm fan, top fan was replaced with a Corsair H60 AIO unit (Gen 2) with the included 120mm fan as intake pushing air through the radiator, and the side panel has 4 120mm Cougar fans. My temps in the case are usually between 28c and 30c. I choose this case for my first build because of the features and the design, installing of the components and working on the case was pretty straight forward, I had plenty of room to work with although once the case was getting pretty full I had to be mindful of what order I was putting components in. This turned out to be a good buy and I would definitely consider buying another case from IN WIN in the future.
None, But see other thoughts.
The only component that gave me trouble during the build was my GPU. The GTX 680 FTW+ 4GB edition, it fit in the slot just fine and in the case with room to spare but the yellow clips at the end where you screw it down would not close for some reason, I removed the screws and still would not close, so I had to break them off in order to screw down the card and make sure it was secure. Not a big deal for me but for some it might, other than that this case is perfect.
2 people found this review helpful. Did you? Yes / No Thanks for the valuable feedback you provided!