Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: IDE Modes Supports master and slave drives
Connector A 1 - IDE 40 pin Male
Connector A 1 - SATA Power Female
Connector A 1 - SATA Data 7 pin Female
Connector B 1 - LP4 Female
Connector B 1 - LP4 Male
Maximum Transfer Rate 133MB/sec
Connector Types 1 - LP4 Male
Connector Types 1 - LP4 Female
Connector Types 1 - IDE 40 pin Male
Connector Types 1 - SP4 Male
Connector Types 1 - SATA Data 7 pin Female
Connector Types 1 - SATA Power Female
Features: 48 bit addressing supports larger capacity drives
Compatible with Ultra ATA 133 specifications
Complete hardware solution, no software needed. Works with PC, MAC, and Linux.
Serial ATA 1.0 compliant
Simple Plug and Play installation
Supports all types of SATA storage devices.
This all in one solution includes the appropriate power cables to convert your SATA power connect...
Specifications: Connector Types: 1 - IDE 40 pin Male
Connector Types: 1 - SATA Data 7 pin Plug
Connector Types: 1 - SATA Power Plug
Connector Types: 1 - SP4 Male
Enclosure Type: Steel
LBA support: 48-bit
Product Height: 1.02 in [26 mm]
Product Length: 3.98 in [101 mm]
Product Weight: 3.67 oz [104 g]
Product Width: 3.07 in [78 mm]
Humidity: 8% ~ 90% RH
Operating Temperature: 5°C to 80°C (41°F to 176°F)
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Chipset ID: JMicron JM20330
OS Compatibility: OS independent; No software or drivers required
Features: Compatible with most 3.5in StarTech.com SATA hard drive docking stations and duplicators.
Supports 40-pin (3.5in) and 44-pin (2.5in) IDE hard drives.
Mounting holes for both 2.5in and 3.5in form factor IDE hard drives.
Large capacity hard...
Specifications: This product does not support hot-swapping of flash cards while the PC is powered on. You must turn-off your computer to switch cards.
Features: Allows Compact flash card to be used as bootable storage
Can be mounted in the front or rear panel of your case, to fit into any 3.5"bay or available expansion slot
Easily swap cards in and out with built-in push button ejector
Easy to use jumpers offer simple master/slave drive setting
Fully compatible with Compact Flash Type I/II and IBM Micro-drive
Quick and driver free installation into any IDE 40 pin and 44 pin slot
Specifications: Includes 1 x Combined 7+15 pin SATA plus LP4 Power to SATA Cable
Connectors 1x SATA 7 pin Female Connector
Connectors 1x SATA 15 pin Female Connector
Connectors 1x LP4 Male Connector
Features: Mount a 2.5in SATA hard drive to any computer with an available 3.5in bay. This Serial ATA hard drive mounting kit allows you to install a 2.5in SATA hard drive in a 3.5in drive bay.
The 2.5in to 3.5in SATA hard drive mounting kit features a sturdy aluminum bracket, as well as a combined 7+15 pin SATA + LP4 Power to SATA cable - which helps simplify installation and reduce clutter within the computer case.
Specifications: Ports: 2
Interface: Mini SATA
Bus Type: PCI Express
Card Type: Standard Profile (LP bracket incl.)
Port Style: Integrated on Card
Serial ATA 3.0 specification
PCI Express 2.0
Chipset ID: Marvell - 88SE9230
Type and Rate: SATA III (6 Gbps)
Port Multiplier: Yes
LBA support: 48-bit
Supported RAID Modes:
JBOD - (Just a Bunch of Disks)
RAID 1 (Mirrored Disks)
RAID 0 (Striped Disks)
Max Drive Capacity: Currently tested up to 4TB per drive
OS Compatibility: Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64)
Windows Server® 2012, 2008 R2, 2003
Mac OS® 10.6 and up (Tested up to 10.10)
Specifications: Chipset ID: Sunplus - SPIF223A
1 - SP4 (4 pin; Small Drive Power) Male
2 - SATA (7 pin; Data) Plug
Host Connectors: 1 - IDE (40 Pin; EIDE/PATA) Female
Type and Rate: SATA I (1.5 Gbps)
OS Compatibility: OS independent; No Software or drivers required
Dimensions: 1.8" x 0.4" x 2.1" W x H x L
Weight: 0.4 oz.
Features: Compliant with SATA specification 1.0
Supports Ulta ATA 100/133 PATA (IDE) controllers
No driver/software installation required
Specifications: 2.5in & 3.5in
Drive Connectors 1 - SATA (7 pin; Data) Receptacle
Host Connectors 1 - mSATA (52 pin; Mini SATA) Male
Max Drive Capacity Currently tested with up to 4TB 7200 RPM hard drive
Type and Rate SATA III (6 Gbps)
1 x SATA (22 pin, data and power)
1 x Compact Flash Slot
Compact Flash Type I, II, and MicroDrive
NOTE: Hot swapping not supported
Features: All-in-one onboard solution takes care of conversion. No software/drivers or cables required
Compatible with Compact Flash I/II, MicroDrive
Use your Compact Flash card to act as the primary bootable device
This SATA to CF SSD adapter features a SATA male power connector and a SATA male data connector, as well as a Compact Flash port, allowing you to connect a Compact Flash type media card to a laptop computer in place of a serial ATA hard drive.
A Do-it-yourself SSD solution, the CF to SATA adapter allows Compact Flash, Compact Flash 2, or MicroDrive media to be used on a notebook computer as a bootable hard drive and requires no software or driver installation....
Specifications: Connector on First End:
1 x 11-pin Male eSATA
1 x 7-pin Female eSATA
Connector on Second End: 1 x Type A Female USB
Features: Compliant with Serial ATA III Specifications
Installation is easy - simply insert the adapter into a power eSATA port on your laptop or desktop computer, then connect a separate eSATA cable for data and a USB cable for power.
Specifications: Cable Length: 24"
Connector Types: 1 - DB9 Male
Internal Ports: 1 - 9 pin IDC (Motherboard Header) Female
Number of Ports: 1
Card Type: Low / Standard Profile
Max Baud Rate: 115200 Kbps
Data Bits: 7, 8
Stop Bits: 1, 2
Parity: None, Odd, Even, Space, Mark
Bus Type: USB 2.0
Chipset ID: FTDI FT232R
Microsoft WHQL Certified: Yes
OS Compatibility: Windows 98/ 98SE/ 2000/ XP(32/64bit)/ Server 2003(32/64bit)/ Vista(32/64bit)/ 7(32/64bit)/ Server 2008 R2, Windows XP Embedded/ CE 4.2/ CE 5.0/ CE 6.0, Mac OS 8, 9, 10.4.x/ Linux 2.4, 2.6
Perfect for system builders looking to add legacy functionality to newer motherboards that lack an integrated RS232 port
Connect, monitor and control industrial/automotive sensors and equipment
Connect bar code scanners, receipt printers and other serial devices to an internal USB motherboard heade...