Special Offers-
No interest for up to 12 months. Plus, New Preferred Account Customers: Save $20 off $100.
Subject to credit approval. Details
-
No Payments for up to 6 months. Minimum purchase required.
Subject to credit approval. Details
Similar Items
Not the product you're looking for? We can make some suggestions to help you decide on a product that fits your needs.
view similar products
-
Manufacturer Warranty
Beyond any applicable Newegg return policy, this item is warranted independently by the product's Manufacturer. Below is a summary provided for convenience only and may not be accurate or current.
Use this link for full details.
- Manufacturer Limited Warranty period (parts): 1 year
- Manufacturer Limited Warranty period (labor): 1 year
Manufacturer Contact Info
Return Policies
This item is covered by Newegg.com's Standard Return Policy.
- Return for refund within: 30 days
- Return for replacement within: 30 days
- Restocking Fee: Yes
|
-
- 5
-
- 53%
- 4
-
- 26%
- 3
-
- 11%
- 2
-
- 5%
- 1
-
- 5%
| Product Rating: |
 
|
| Total Reviews: |
19 |
Works Fine
- Pros: Does just what I want it to. Moves a lot of air.
- Cons: None so far.
- Other Thoughts: Cheap and strong enough.
Pretty Ok, so far...
- Pros: This seems to put out pretty stable voltage, and is very quiet. Pretty straight-forward, no frills PSU.
- Cons: None yet.
- Other Thoughts: As others have remarked, the cables on this unit are *very* short. In my own circumstance, this is not a bad thing, as I'm building an HTPC rig with a very small form-factor. It does limit the placement of the PSU relative to the mobo a bit, but shouldn't be much of an issue if you're building a SFF rig.
Works Fine
- Pros: Inexpensive. Looks like every other power supply I've seen.
- Cons: The cables are a little shorter than my old power supply, but still reach OK (my case is also a few years old and therefore a little larger).
- Other Thoughts: Installation is a little tricky. I've upgraded hard drives, RAM, and a CPU once, but this had a lot more parts. I used a camera to take pictures of where everything was connected to make sure I could put it all back together again. :)
Lastly, through Newegg I was able to put in the model number of my old PS and use the Similar Items section to find ones with matching specs. Nice!
| Model |
| Brand |
FSP Group |
| Model |
ATX300-PA |
| Spec |
| Type |
ATX 12V (v2.2) |
| Maximum Power |
300W |
| Fans |
1 |
| PFC |
No |
| Main Connector |
20+4Pin |
| +12V Rails |
2 |
| PCI-Express Connector |
No |
| SATA Power Connector |
1 |
| SLI |
No |
| Modular |
No |
| Power Good Signal |
100-500ms |
| Hold-up Time |
12.0mS minimum at 115V/60Hz or 230V/50Hz (Full Load) |
| Efficiency |
> 70% |
| Over Voltage Protection |
+3.3V (4.6V max.), +5V (6.5V max.), 12V1 (15.5V max.), 12V2 (15.5V max.) |
| Overload Protection |
Yes |
| Input Voltage |
110 - 127/220 - 240V |
| Input Frequency Range |
50/60 Hz |
| Input Current |
7A @ 115V, 4A @ 230V |
| Output |
+3.3V@20A, +5V@20A, +12V1@16A, +12V2@16A, -12V@0.8A, +5VSB@2A |
| MTBF |
100K hours at 25°C |
| Approvals |
UL, CSA, TUV, NEMKO, CB & FCC |
| Features |
| Connectors |
1 x Main connector (20+4 pin)
1 x 12V (P4)
4 x peripheral
1 x SATA
1 x Floppy |
| Features |
Remote ON/OFF Control:
The power supply shall accept a logic open collector level which will disable / enable all output voltage (excluding +5V standby).
Over-current protection: +3.3V (66.0A max.), +5V (50.0A max.), 12V1 (27.0A max.), 12V2 (27.0A max.)
Temperature range: operating 0°C~50°C, storage -20°C~65°C
Humidity: 90~95% RH
Dielectric strength: primary to Frame Ground 1800 VAC for 1 second, primary to secondary 1800 VAC for 1 second |
| Manufacturer Warranty |
| Parts |
1 year limited |
| Labor |
1 year limited |
Introduction
Is it time to upgrade or replace your PSU? The ATX300-PA from FSP will nicely do the job. The 300W output provides ample power for most applications. It has two +12V rails for stable output during heavy loads. An 80mm fan pulls air directly across the internal components to eliminate overheating worries.
There is a good selection of connectors to keep your drives and accessories powered. The 4 Molex and 1 FDD connector are supplemented by an SATA connector. Keep your system running at peak efficiency with a new power supply from FSP.
Highlights
 |
ATX12V v2.0 Compatible
Compatible with the ATX12V v2.0 standard, the FSP Group ATX300-PA power supply provides maximum power stability to drive the latest Intel and AMD processors as well as other components for desktop computer systems.
|
 |
300W Maximum Power
A maximum power of 300W delivers safe, reliable output for basic computer systems.
|
Quick Specs
| Brand | FSP Group |
| Type | ATX12V |
| +12V Rails | 2 |
| Main Connector | 20+4Pin |
| Fans | 1 |
|
Reviewed By: AlabamaCajun on 1/6/2006
Tech Level: high - Ownership: 1 month to 1 year
