-
Currently Unavailable
-
-
Similar Items
Not the product you're looking for? We can make some suggestions to help you decide on a product that fits your needs.
view similar products
-
Manufacturer Warranty
Beyond any applicable Newegg return policy, this item is warranted independently by the product's Manufacturer. Below is a summary provided for convenience only and may not be accurate or current.
Use this link for full details.
- Manufacturer Limited Warranty period (parts): 3 years
- Manufacturer Limited Warranty period (labor): 0 day
Manufacturer Contact Info
|
-
- 5
-
- 43%
- 4
-
- 14%
- 3
-
- 14%
- 2
-
- 10%
- 1
-
- 19%
| Product Rating: |
 
|
| Total Reviews: |
21 |
Great Unit
- Pros: Modular Wiring Rules! Use only what you need. Good amount of watts. Very solid construction, great looking PSU
- Cons: Large PSU, had to remove the 80mm fan out of the top of my NZXT Lexa case for it to fit.
- Other Thoughts: You need to have ample room below your psu for the modular wiring. If you have a large CPU fan, or your cpu fan is high up on the MB, be careful with ordering this psu.
- Pros: Runs fine. e6600, Intel BX2, 2gb Crucial 8500, 8800gts, 2 DVD's, 2 HDD, multiple fans in a Mozart TX case.
- Cons: Placement of Modular cables is awkward, at least in this case.
- Other Thoughts: If not for my choice of case, I'd give it a 6. Not Hiper's fault.
No Problems
- Pros: Installed and worked as advertised. The mirror finish on the case is excellent as are the modular cables' sleeving and clips. Hard to make a mistake installing this one. Modular connectors do take up a LOT of space, so make sure you have a couple of inches of room between the bottom of the PS and other components in your system. The fans are nearly silent, and move a decent amount of air.
This unit has worked perfectly since the moment I installed it. Time will tell if it can go the distance.
- Cons: None for me, but beware of space requirements for modular connectors and cabling.
- Other Thoughts: Make sure the included cabling has all the connectors you will need for your components. If not, be sure to order additional modular extenders from Hiper.
| Model |
| Brand |
HIPER |
| Model |
HPU-4S730-MS |
| Spec |
| Type |
ATX12V v2.2 |
| Maximum Power |
730W |
| Fans |
2 x 80mm Fan (Front and Rear) |
| PFC |
Active |
| Main Connector |
24Pin |
| +12V Rails |
4 x 12V independent rails |
| PCI-Express Connector |
2 x 6-Pin |
| SLI |
Certified |
| CrossFire |
Ready |
| Modular |
Yes |
| Power Good Signal |
100-500ms |
| Hold-up Time |
16ms min. |
| Efficiency |
> 80% |
| Input Voltage |
100 - 240 V |
| Input Frequency Range |
50/60 Hz |
| Input Current |
12A |
| Output |
+3.3V@24A,+5V@28A,+12V1@16A,+12V2@16A,+12V3@16A,+12V4@16A,-12V@0.5A,+5VSB@3.0A |
| Features |
| Connectors |
1 x Main connector (24-pin)
1 x 12V(4+4-pin)
8 x peripheral
4 x SATA
2 x Floppy
2 x PCI-E |
| Features |
Four independent 12V rails
Omnigrid™ II system & Extender™.
Industry's 1st Stainless steel PSU body.
SLI-Ready.
Mesh body construction allows immediate heat dissipation and extends the life of the unit.
Unique user friendly modular design to reduce excess cables
Complies with latest ATX12V v2.2.
Active Power Factor Correction (PFC).
Gold plated connectors for minimum power loss and optimal conductivity.
PCI-E, SATA, Molex with EZ-Grip, floppy & P4 connector.
Free utility box |
| Manufacturer Warranty |
| Parts |
3 years limited |
|
|
Reviewed By: JonC from TN on 10/24/2007
Tech Level: high - Ownership: 1 week to 1 month
