Special Offers-
No interest for up to 12 months. Plus, New Preferred Account Customers: Save $20 off $100.
Subject to credit approval. Details
-
No Payments for up to 6 months. Minimum purchase required.
Subject to credit approval. Details
Similar Items
Not the product you're looking for? We can make some suggestions to help you decide on a product that fits your needs.
view similar products
-
Manufacturer Warranty
Beyond any applicable Newegg return policy, this item is warranted independently by the product's Manufacturer. Below is a summary provided for convenience only and may not be accurate or current.
Use this link for full details.
Manufacturer Contact Info
Return Policies
This item is covered by Newegg.com's Standard Return Policy.
- Return for refund within: 30 days
- Return for replacement within: 30 days
- Restocking Fee: Yes
|
-
- 5
-
- 74%
- 4
-
- 14%
- 3
-
- 4%
- 2
-
- 4%
- 1
-
- 4%
| Product Rating: |
|
| Total Reviews: |
139 |
Cooler Cards :)
- Pros: Cheap, all copper, drop my 2 ridiculously hot sli EVGA 8600GTs from 58C* to 45C* idle and 58C* full load, with different thermal compound, didnt try the stock one(its thermal conductivety is 1.134w/m-k, EWWW;).
- Cons: Had to use Zip Ties to mount them on the cards, blue red leds(should've just been blue).
- Other Thoughts: It works well, get it for any card, if you have Zip Ties ;)
May Fit Graphic Card (Needs Mods)
- Pros: Low Cost for a heat sink made of copper. This gives it a better performance over other material types like aluminum.
- Cons: Does Not fit ATI Graphics boards without modifications.
- Other Thoughts: As always, I received this item very quickly from NewEgg for fan replacement on my ATI 9600 Graphics Board. Upon removing the old fan, I noticed that the Evercool fan was bigger.
Old Fan Dimensions
Diameter: 47mm
Height: 11mm
Stake Pins Centers: 55mm
Stake Pins (end to end): 61mm
Evercool
Diameter: 56mm
Height: 14mm
Stake Pins Center: 55mm
Stake Pins (end to end): 65mm
The main concern was the stake pins centers - 55mm for both. I had to remove some of the stake pin mount on one side. Also I had to use a round file to accommodate an electrolytic cap on the board next to the fan. However, after mechanical mods, it fit.
Warning: Larger height of fan may affect if the PCI board next to graphics board may not fit (i.e. distance between boards). In my case, I had a blank in this position, which did not effect me.
Accidentally Good
- Pros: Very easy to install into my DFI LanParty NF4 Ultra-D to replace my dead chipset fan. It runs very quiet, keeps the chip cool, and looks cool!
- Cons: I originally bought this for my ATI Radeon X1800XL video card, but it didn't even come to close to fitting, and therefore is incompatible. It was merely a coincidence that my motherboard chipset fan decided to die at the time I received this cooler, so I used it to replace the dead fan instead.
- Other Thoughts: I don't think this cooler fits the Radeon X**** series video cards, but it's great as a motherboard chipset fan replacement. Newegg shipping was very fast as usual, and their service is always top notch.
| Model |
| Brand |
EVERCOOL |
| Model |
VC-RE |
| Spec |
| Compatibility |
ATI Radeon series
NVIDIA GeForce3 TI series
NVIDIA GeForce4 MX series
SIS Xabre series |
| Bearing Type |
Ball |
| RPM |
5000±10% RPM |
| Air Flow |
7.79 CFM |
| Noise Level |
<24 dBA |
| Power Connector |
3 / 4 Pin |
| Fan Color |
Orange |
| LED |
Blue & Red |
| Heatsink Material |
Copper |
| Physical Spec |
| Fan Dimensions |
45 x 45 x 10mm |
| Features |
| Features |
All in one vga cooler kit with push pin for quick and easy installation
Pure copper fold fin heatsink
Led inside |
| Package Contents |
| Package Contents |
VGA Cooler
Thermal Grease
3 / 4 Pin Power Connector |
|
|
Reviewed By: Nick on 10/20/2009
Tech Level: somewhat high - Ownership: 1 day to 1 week
