JetWay J939GT3-PTD 939 NVIDIA GeForce 6100 Micro ATX AMD Motherboard

Pros: No DOA for me. Good chipsets for linux. Onboard DVI and Component. There is also an SPDIF header on the board and is even mentioned in the booklet...just need to buy an adapter. Bios are easy enough to use and easy to overclock.

Cons: Documentation is lacking.

Other Thoughts: Using for a Linux MythTV system because of the onboard DVI/Component. Makes for a good HTPC board.

Pros: SATA II, DVI Onboard Video, 8 Channel Surround Sound. Quality Made. Plenty of bang for the buck!

Cons: Placement of Front Audio Block.

Other Thoughts: This little board was perfect for a PC I built for my nephew for christmas. Newegg rocks! Support for a DVI Panel on the board. 8 Channel Sound is better than most sound cards. SATA II on here too.

For those having input, boot up, or other issues, follow the instructions or more simply put follow the first step in motherboard building: CLEAR THE CMOS via jumper. I read a review here talking about keyboard support and I also did not clear the CMOS just to test this board. I knew the issue but . . Sure enough ZERO Input Support. Cleared CMOS and !Walla! it works.

Front Audio Block is behind Rear Audio Ports. This is becoming commonplace and in my opinion is bad location because of cable channeling.

A great board for anyone lacking a PCI-E video card or those looking for a budget board with alot of features.

Pros: - it turned on, I guess

- customer support responded quickly, but was of no help

Cons: - Ordered 2 boards both refused to respond to keyboard to get into/past BIOS, tried several keyboards both USB and PS/2

Other Thoughts: Horrible, it ruined a Christmas gift I was trying to build a PC for my brother for Christmas. After shipping 2 different boards I ran out of time to order a new, different one.

Wow Jetway is terrible 2 failed attempts I wouldn't have bought it a 2nd time but the ASUS was out of stock. I'll never consider them again.

Pros: none

Cons: Received the board DOA. Probably won't buy another Jetway board.

Pros: It's cheap.

Cons: It's"cheap"! Board bends severly when clamping the CPU heatsink down (factory AMD). Built 2 identical systems, sent both MB's back for refund and bought Bio*. Both Jetways had different issues I didn't want to deal with.

Other Thoughts: Cheap. The Bio*-M9 replacements worked great, no issues.

Pros: Went in my case nice & neet. Extras were a nice surprize.Bios & Manual were easy to fallow. Way to go guys!

Cons: Could have included an Energy Drink, lol.

Other Thoughts: Love it, feed it, give it a nice home and it will be your best friend!

Pros: Newegg is great & I wish I had bought this JetWay board from them. I have nothing good to say about my JetWay board.

Cons: Board is cheaply made. Video slot was loose with short that not only didn't work...it also took out my video card. Luckily, eVGA replaced video card; eventhough, it was clearly JetWay's fault. JetWay never answered any of my request. Like I said, "Should have bought the junk board from Newegg.

Other Thoughts: Buy from Newegg if you're going to buy any JetWay board. Newegg will cover you initially. Don't expect anything from JetWay; except, misery!

Pros: Very stable so far for the first week. Very clean design. It's even smaller than most MicroATX motherboards, so it's an easy fit in small cases. The onboard 6100 DVI video is decent for most applications and video playback, but games will likely need a video upgrade (I added the 7600GS).

Cons: nForce4 410 chipset only supports two SATA drives.

Other Thoughts: Overall very decent, but reliability will be the question for this off-brand motherboard. If it continues to run like it has during the first week, then it is a great choice!

Pros: Replaced an older DFI LANPARTY UT NFORCE 4 board. This one seems much faster - possibly because it is just plain newer than that one was. Good overclocking abilities, RAM goes up to 3.15 volts (somewhere a little above 3), but overclocking ram timings somewhat limited. If you want insane bios options, the DFI was the way to go, in my experience. Onboard DVI output

Cons: weak rear cpu fan mount screws/clips. It will work, but not as strong as id like. Made no diff because i replaced it altogether with an aftermarket cooler.

Other Thoughts: Surprisingly high quality for an off-brand board

Pros: Well was excited to recieve this with quick shipping from newegg. Had lots of features I wanted for an htpc.

Cons: Mine lasted one day and no longer posted.

Other Thoughts: Probably will give it another try