Showing Results: Most Recent
Pros: Great mouse when i first got it, good fit, looks pretty, high dpi...
Cons: about 8 months after getting the mouse, left click started acting up, a lot of people have this problem, and logitech doesn't seem to care at all. RMA submitted and have been waiting WAY too long for a reply. I'm done with logitech and their gimmicky products.READ FULL REVIEW
Pros: There is a LOT crammed onto this board.
Drivers worked fine for me, idk what others are getting problems with that for.
Cons: not much room for a decent low profile cooler (expected being a mini ITX..
I had an issue with my processor temps on this board, something i haven't run into before and couldn't find any info on.
Once up an running with windows installed and a few games installed, i started running some benchmarks, but before i started, i checked temps. Everything was good except for the core temps. they were all settled around 5C, which definitely doesn't make sense seeing as the ambient temp was around 25C. No support from ASUS of course because the rep i talked to on the phone couldn't hardly speak english, and once i was forwarded to someone that could, they said they've never seen that before and couldn't help.
BIOS shows the CPU settling around 45-50C after about 30 minutes so it's not the processor. maybe a windows issue? not sure...
either way, for lack of support from asus, i take an egg.
Other Thoughts: The build plays Crysis 2 at 45-50fps maxed out no problem, Skyrim pulls 60fps full time on ultra...
ASUS F1A75-I Deluxe mobo
AMD A8 3850 APU
Scythe Kozuti cooler with extra slim scythe 100mm fan mounted on it
Corsair Vengeance 1600 8GB (2 x 4GB)
XFX HD Radeon 6970 2GB
Seasonic X750 Gold
OCZ Vertex 3 SSD 120GB
Seagate Barracuda 1TB HDD
all mounted in LIAN LI PC-TU200B Case.
This review is from: ZALMAN CNPS9500 AT 2 Ball CPU Cooling Fan/Heatsink
Pros: This is easily a $100 cooler.
- With an i7-2600k overclocked to 4.75 GHz I'm only reaching 74c under Prime95, idle around 30c (before thermal paste set-in time).
- Very quiet.
- All copper design
-Clears the ram slots on my P8Z68-M Pro by about 4 MM (I have high profile Corsair Vengeance ram sticks).
- 4 pin PWM fan connector (no need for a controller with my mobo).
- Fits easily in my IN-WIN Dragon Slayer case.
- Installation (including removing my previous heatsink and backplate) took 5 minutes.
Cons: Fins are sharp and easily bent, but if you are careful this shouldn't be a problem.
None other than that.
Other Thoughts: I purchased this cooler with Arctic Silver 5, i didn't use the included paste.READ FULL REVIEW