Showing Results: Most Recent
This review is from: Targus APA31US-51-B 90 Watt AC Laptop Charger
Pros: It works great on HP M6-1125dx and Acer V5-571.
90 degree angle connector!!!
Cons: ferrite bead is bit too close to the connector.
Other Thoughts: HP laptop always has the AC connector to its right, generally, I don't mind if the pc is power by its battery. However, when you decided to hook your laptop with AC charger while using USB mouse, then, you are in for the mess. HP/Dell unliked Sony / Samsung / Asus / Acer do not use 90-degree-angle connector, and when it is plug in.. it ALWAYS stick out so much that gets on the way of your mouse. Anyway, this is a great AC charger!!!READ FULL REVIEW
Pros: Easy to apply, plenty in the tube, Easy to clean with alcohol.
Cons: Not much better than Radio Shack product number 276-1372 silicon base paste.
Other Thoughts: 1. Assume CoreTemp 1.0RC5 works correctly under Win7.
2. Room temperature is 26 degree C.
3. Both desktop/ laptop using stock HSF/ non-OC
4. Both previous applied with RS silicon paste.
Mini-itx case Intel G1610 no-case fan, onboard video.
Hp DV6t-6c00 Intel i5-2430m, onboard video.
Had a chance to grab a MX-4 over the weekend figure I would like to give it a try.
Desktop idle: no change, before and after.
Laptop idle: no change, before and after.
Desktop HD movie 10-min: no change, before and after.
Laptop sniper 2 10-min: Temp is 3 degree cooler during game play. Also, cool down approximately 10 seconds faster back to idle fan spin mod.
I wouldn't throw away w/ my cheapo RS grease just yet. After all, RS paste never dried after 6 years of intensive use on my last desktop system.
Pros: It works as expected and very stable on low power HTPC.
ECS H61H2-I3 (v1.0) Bios 01042013
Intel Celeron G1610
Powerman 410watt PSU
Other Thoughts: Not all budget motherboards will support the DDR3 1600!
Make sure your motherboard support the speed before you order. ( or at least update your bios before you install )