ORICO Official Store
ORICO M.2 SSD enclosure-adapter provides the possibility to use the M.2 NVME SSD solid state drive as an external drive(as a portabele ssd) only through the USB port of a PC or laptop.
Product model: M2V02-C4
Product interface: USB4.0 Type C
Data cable: 1x Thunderbolt3(40Gbps) C to C
1x USB A to C
Support maximum SSD capacity: 2TB
Shell: Aluminum shell
Test continuous reading speed: 2721MB/s
Test continuous writing speed: 1533MB/s
* Support USB4.0, fully compatible with Thunderbolt 3 /Thunderbolt4 USB3.2 /3.1 /3.0 /Type-C (USB2.0 and lower versions are not compatible).
* Support UASP acceleration protocol, support SMART, TRIM function, and intelligently protect data.
* Support plug-and-play and hot-swappable; simple installation, no driver required.
* Support smart sleep when idle for 10 minutes.
* No need for additional power supply, powered by the computer's USB interface.
* Friendly LED displays the current operating status.
1. Open the M2V02 hard disk housing and insert the NVMe SSD into the M2V02 card slot.
2. Fix the SSD with the screws included in the M2V02 package.
3. Put the silicone heat sink along the SSD.
4. Cover the M2V02 shell and fix it with screws.
Most USB4.0 products on the market are not compatible with devices other than computers with Thunderbolt3 interfaces. However, this ORICO M2V02 is not only compatible with computers with Thunderbolt3/4/USB3.2/3.1 interfaces, but also compatible with mobile phones, game console, cameras and other devices. However, due to the limitation of device interface bandwidth, the transmission speed is limited to 10Gbps.
It is recommended to use a computer with Thunderbolt3 interface to connect to the M2V02, and use the Thunderbolt (40Gbps) C to C cable that comes with the M2V02 as the connection cable, which can reach a theoretical speed of 2000MB/s.