Your Browsing History
100%
Brand | Obihai |
---|---|
Model | OBI110 |
Type | Accessories |
---|
Security | Local Access Interface: IVR Password Remote Access Interface: User Name & Password Access via HTTP, TFTP - HTTPS Device Web Page Standard: HTTP v1.1, XMLv1.0 Secure Remote Provisioning: TFTP, HTTP, HTTPS |
---|---|
Ports | Internet (WAN): 1 x 10/100BaseT Ethernet Port (802.3) Phone (FXS): 1 x RJ-11 FXS Analog Phone Port Line (FXO): 1 x RJ-11 FXO Analog Line Port |
LEDs | Power On, Device Status, Upgrade in Progress Status, Packet RX/TX, Phone Port Status (Enabled, In-Use), Line Port Status(Enabled, In-Use) |
Power | Input Power: AC Input: 100 to 240 Volts 0.3A 50-60Hz (26-34 VA) Output Power: DC: +12V 1.0 Amp Max |
Dimensions | 4.5" x 4.2" x 1.2" |
Weight | 9 ounces |
Temperature | 0 degree C to 45 degree C |
Humidity | 10% to 90%, Non-Condensing |
Specifications | Voice Service Bridge and Telephone Adapter with SIP, OBiTALK, Telephone & Phone Line Interfaces Mounting: Desktop or Wall Mountable Microprocessor: Chip Vendor:Obihai SoC Width of Machine Word: 32 bit Instruction Set: MIPS FXS SLIC (Subscriber Line Integrated Circuit) & FXO Subsystem: Ringer Specifications: Ring Frequency: 14Hz - 68Hz Ring Waveform: Trapezoidal, Sinusoidal Ring Voltage: 55v - 85v Maximum Ring Load: 5 REN (Ringer Equivalence Number) FXS (PHONE Port) Configuration Settings: Recursive Digit Map & Associated Outbound Call Routing On-Hook Tip Ring Voltage: 30v - 52v Off-Hook Current Max: 15mA - 45mA Impedance: 12 Independent Settings DTMF Playback Level: -90 dBm - 3dBm Caller ID Method (FSK Bell202, FSK V.23, DTMF FI/SE/DK) Caller ID Trigger (Before / After First Ring, Polarity Reversal) Channel Tx Gain: -12dB - 12dB Channel Rx Gain: -12dB - 12dB Silence Detect Sensitivity HookFlash Time Max HookFlash Time Min CPC Delay Time CPC Duration Idle Polarity Connect Polarity FXO (LINE Port)Configuration Settings: Recursive Digit Map & Associated Inbound Call Routing Ring Delay Detect CPC CPC Time Threshold Detect Polarity Reversal Detect Far End Long Silence Detect Near End Long Silence Silence Detect Sensitivity Silence Time Threshold Detect Disconnect Tone Disconnect Tone Pattern - Programmable AC Impedance: 16 Settings On-Hook Speed: 0.5ms, 3ms (ETSI), 26 (AU) Tip-Ring Voltage: 3.1v, 3.2v, 3.35v, 3.5v Min Operational Loop Current: 10mA, 12mA, 14mA, 16mA Current Limiting Enable Channel Tx Gain Channel Rx Gain Line In-Use Voltage Threshold Line In-Use Current Threshold Caller ID Detect Method: FSK (Bell 202), FSK (V.23), DTMF (FI, SE, DK) DTMF Playback Level Logical FXS to FXO Relay: For Service Continuity in Case of VoIP Service Failure *More information, Please see obihai website. |
Features | Robust Telephony Features: Message Waiting Indication - Visual and Tone Based Speed Dialing of 99 OBi Endpoints or Numbers Three Way Conference Calling with Local Mixing Hook Flash Event Signaling Caller ID - Name & Number Caller ID Spoofing Call Waiting Call Forward - Unconditional Call Forward on Busy Call Forward on No Answer Call Transfer Anonymous Call Block Anonymous Call Do Not Disturb Call Return Repeat Dialing Powerful Call Routing & Voice Service Features: SIP Support for Voice and Fax Over IP from Internet Telephony Service Providers OBiTALK Managed VoIP Network for OBi Endpoint Devices & Applications High Quality Voice Encoding Using G.711, G.726, G.729 Algorithms Recursive Digit Maps & Associated Call Routing (Outbound, Inbound) Service Continuity in Case of Network Failure (Configurable) |
---|
Date First Available | April 06, 2012 |
---|