- DDR3 1333 (PC3 10666)
- Timing 7-7-7-20
- Cas Latency 7
- Voltage 1.65V
Some manufacturers place restrictions on how details of their products may be communicated.
Great memory so far 08/21/2010
Works perfectly fine with my ASUS P6T motherboard and core i7-930 processor. I've owned Mushkin memory in the past (probably 5-6 years total) and only had one stick fail.
I could not decide between this 1.65v and the 1.5v - 1.6v modules. So I gambled on the 1.65v. ASUS has a big sticker note on the motherboard and in the manual that Intel recommends not going over 1.65v for the memory or it may damage the processor. I was very nervous about running this memory at its spec of 1.65v so I adjusted the voltage to 1.64v in the motherboard's bios and it still seems to work fine. one note, it may be my motherboard, but when I 1st booted the system up and went into the bios, the memory was set to 1.5v if I remember the exact # correctly. So just remember to change it to or close to the memory's voltage spec.
Did you find this review helpful? Yes / No Thanks for the valuable feedback you provided!