Ballistix Sport LT 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Desktop Memory Model BLS2K8G4D32AESBK

Pros: good price, usually reliable brand

Cons: RAM won't boot at advertised speed - using an 8+2 phase ASUS TUF B550, shouldn't have any issues.
Works at 3000Mhz, won't even POST at 3200Mhz.

Overall Review: not stable even you increase the DRAM voltage by 5%.

Pros: Great OC for the price

Cons: ?

Overall Review: I had to manually adjust timings to hit 3600cl16. XMP profiles would cause errors at 3600 settings. Beware DRAM calculator settings if you don’t know what you’re doing. It doesn’t seem to match well with this kit. There are helpful posts on AMD subs for setting timings for Edie Ram just like this kit
B450 Mortar/Ryzen 3600

Pros: - Runs at advertised speeds
- Passed a 24 hour Memtest86 burn-in

Cons: None

Overall Review: Running this in an mITX HTPC build that is mostly used for playing party games when friends come over. The RAM works great with the Ryzen 2600 and MSI Performance Gaming B450I motherboard. XMP 2.0 settings work as advertised and the RAM showed no errors running it through a 24 hour Memtest86 burn-in.

Pros: - 2 of these kits with my CPU can do 4700mhz with safe VCCio and VCCsa voltages. With my 2 4800 cl18 B-Die kits from G.Skill I can only run 4400 with safe volts.
- runs 4400mhz cl17-23-23-44 1.5V
- Way easier to drive then b-die, only needs 1.1V vccio and 1.18V vccsa for 4400mhz unlike 1.2 and 1.26V respectively for b-die on an ES 9900k.
- It's Micron Rev.E
- Very easy to do a basic overclock.
- Hands down best value memory kit.
- Heat spreader is better then average in effectiveness.

Cons: - 0.5mm to high to fit under a nh-d15 comfortably.
- Ref period sucks.

Overall Review: This kit of ram overclocks incredibly, for the price.

Pros: -Overclocked to 3733 at 1.35V with 4 of these sticks total
-Timing were successfully tightened (not going to list them all) 16-19-16-36-58-560-1T
-Look nice
-Affordable

Cons: -There are more expensive memory modules that have better timings

Overall Review: Already had one pair of these that I got at (INSERT COMPANY) a few months back. They really overclocked nice so I wanted another pair to fill out my motherboard. Worked like a charm and I only had to reduce tWRRD from 3 to 1, did not lose any other timings or frequency when adding the sticks. Very happy. Ryzen 5 3600@stock MSI B450-A Pro.

Overall Review: While I'm not anywhere close to being a RAM connoisseur, these seem to work well. It's been several years since my last build, so it took a couple tries to figure out that I needed to implement the XMP profile for my Aorus Ultra X570 board to get the 3200mhz speed. Once I did though they have worked just fine. Have not tried OC at all, so can't report on their performance there.

To get 16GB of 3200Mhz RAM for $75 seems like a real good deal, but with this big window in my new case, they're just crying out for RGB lighted ones next.

Pros: Set xmp profile and go. Overclocked to 3200 with one click. Tweaked timings to be tighter with Rzyzen memory master. Good micron e-die ram. Close to b-die speeds, half the price.

Cons: None.

Overall Review: Recommended if you want fast cheap ram with Ryzen.

Pros: None

Cons: It's one speed being sold as another speed

Overall Review: Ordered it as ddr4-3200 memory but, it's 2400 memory that's got an overclock xmp profile. It's sold and marketed as 3200 memory though. This is deceptive practices.