Question 1

Will this work with a Mitel VoIP system?

Accepted Answer

This will work with just about any phone system provided you have a connection to the VOIP system.  All it does is use your internet connection to give you a dial tone from your VOIP phone system.  We use these in our remote offices because we have a VPN connection to each one and that lets them connect to us.  Otherwise you can just use your public internet address but you'll need to add a route in your router to direct traffic over whatever port these use to your VOIP phone switch.

In short, I'm sure it will work just fine.

Question 2

I'm currently using a Cisco IP Phone 7940 a ARRIS TM602G cable model and need to bypass my ASUS RT-N53 Wireless network router to connect to a remote Cisco VoIP Server.  Would this device accommodate such a configuration?

Accepted Answer

Yes, and this device will add additional voip to pstn (plan old phone system) adaptation. If you only need 1 phone line, you don't need this device.  You already have your cisco 7940.

This device will connect to your arris tm602g modem. Where you can connect additional networking equipment to the router side of SPA3102, and you can connect a regular phone to the voip side.

Question 3

I have a Panasonic Hybrid PBX phone system.
I need to extend a PBX phone extension across our network. can i plug one of these at the PBX location and another across our property thru our network and use a PBX phone on the other end?  
PBX--->SPA3102---->Network--->SPA3102--->PBX Phone.
Thanks in advance for your time.
Greg

Accepted Answer

It will do analogue PBX system I tried googling but hybrid doesn't come up any were. What is hybrid? I  use these to extend phone lines with wireless Ethernet radios just the same as you want to do thru a network. I prefer the spa3000 less echoing these take a lot of tinkering to get the echo out

Brand	Cisco Small Business
Model	SPA3102

Security	Password Protected System Reset to Factory Default Password Protected Admin and User Access Authority Provisioning/Configuration/Authentication: HTTPS with Factory Installed Client Certificate HTTP Digest - Encrypted Authentication via MD5 (RFC 1321) Up to 256-bit AES Encryption
Ports	2 100baseT RJ-45 Ethernet Port (IEEE 802.3) -- 1 WAN, 1 LAN 1 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring) 1 RJ-11 FXO Phone Ports - For a Telco or PBX Connection
LEDs	Power, Internet, Phone 1, Phone 2
Power	DC Input Voltage: +5 VDC at 2.0 A Max. Power Consumption: 5 Watts Switching Type (100-240v) Automatic Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input
Dimensions	4.0" x 4.0" x 1.1"
Weight	5.1 oz.

Cisco Small Business SPA3102 Voice Gateway with Router

Learn more about the Cisco Systems, Inc. SPA3102

Customer Reviews of the Cisco Systems, Inc. SPA3102

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16833124239