Question 1

Height of RAM? I need it to be 32mm or less.

Accepted Answer

specs say height is 34mm

Question 2

Compatible with ASRock B450 Pro4 and 2700X? Hoping to run this 2x16GB pair now, then add another pair later. Their QVL seems quite limited for 4x16GB.

Accepted Answer

I do not have that specific combination, but, i can tell you this..
I purchased this ram to go with an Asus z390-E Gaming MB. I put the ram in the MB in the slots 2 and 4 as the MB manual said to do. It would not work. I called Asus and they said the ram was not on the QVL and i should contact Newegg about a return. Since the ram was not defective and it was my lack of research that was the issue, i could not return the RAM without paying penalties (If i could return at all). I decided to ignore Asus and proceeded to place the ram into slots 1 and 2 (Which Asus said would not work) However, the MB then proceeded to boot. Unfortunately the RAM was only recognized at 2400Mhz in stead of 3200Mhz. At this point i went ahead and installed my OS's and decided to settle for the lower speed instead of paying for new ram. Now, I knew that the architecture of the ram was standard (DDR4) so the lower speed was nagging at me. After verifying that the UEFI/BIOS was fully up to date I proceeded to change the XMP profile in the UEFI, and lo and behold, after saving and rebooting my ram was recognized at 3200Mhz and the full 32GB. (This was an automatic profile, I did not have to manually define parameters) SO, short answer, if you feel lucky, go for it, but remember that your return is not valid on this type of call. Also, even though your particular MB manual may say use only slots 2 and 4  for ram, this only matters if the RAM is QVL for your particular MB.

Short answer, if you already purchased the RAM, try some basic tricks to get it working, if not, safest to stick to QVL, which i consider 88% marketing and not an actual limiting factoring due to commonality in the DDR4 architecture. Good luck and clearly understand your return/exchange policies before purchasing anything.
Note, I only have the 2 DIMMs installed, have not expanded to 64Gigs yet

Question 3

Is this DDR4-3200 CL16 kit a better buy than DDR4-3600 for most DDR4 builds?

Accepted Answer

This kit is the better choice if you want a simpler, lower-risk DDR4 upgrade with broadly supported XMP settings and very solid real-world performance. DDR4-3600 can deliver a small uplift in some CPU-limited gaming scenarios, especially on tuned Ryzen systems, but review data commonly shows the gain as modest rather than transformative. Pick DDR4-3200 CL16 when you value compatibility, price discipline, and predictable setup; move to DDR4-3600 if you are specifically optimizing a DDR4 platform for every last bit of gaming performance.

Question 4

Should I buy this 32GB DDR4-3200 CL16 kit or a 16GB DDR4-3200 kit?

Accepted Answer

Choose this 32GB kit if you want more headroom for newer games, multitasking, modded games, content creation, or keeping many apps and browser tabs open while gaming. A 16GB DDR4-3200 kit is still workable for many systems, but current review coverage and community guidance increasingly treat 32GB as the safer long-term capacity. The main trade-off is cost, not a major speed difference, because both configurations can use the same DDR4-3200 class memory speed.

Question 5

Is this DDR4 kit a good choice compared with moving to DDR5?

Accepted Answer

Choose this kit if you are upgrading or maintaining a DDR4 platform and want a cost-conscious, straightforward memory purchase. If you are building a new platform that already supports DDR5, DDR5 generally offers higher ceiling performance and better long-term platform alignment, especially in newer CPU-limited gaming comparisons. The key trade-off is platform context: this kit makes sense for DDR4 motherboards, while DDR5 makes more sense for a fresh build where motherboard and CPU choice are still flexible.

Question 6

Should I choose this low-profile Corsair Vengeance LPX kit or a taller RGB DDR4 kit?

Accepted Answer

Choose this Vengeance LPX kit when physical clearance matters more than lighting. Its low-profile design makes it a practical fit for dual-tower air coolers, compact cases, and builds where RAM height can interfere with the front fan on a large CPU cooler. A taller RGB kit can make more sense if visual styling is a priority and your case and cooler leave enough memory clearance.

Question 7

What is the main trade-off versus taller RGB DDR4 alternatives?

Accepted Answer

The main trade-off is simple: you give up decorative RGB lighting and some premium visual appeal in exchange for easier cooler clearance, a lower-profile design, and a more utilitarian build-focused choice. For buyers comparing similar 3200 CL16 DDR4 kits, LPX is usually the better fit-first option, while RGB models are the style-first option.

Question 8

Is this a good choice for small builds or large air coolers?

Accepted Answer

Yes. Low-clearance fit is one of the most common decision factors for LPX memory, and this kit is specifically strong there. Its low-profile heatspreader is designed to reduce interference with large CPU air coolers and tighter cases, making it a safer choice than taller RGB memory for compact or airflow-constrained desktop builds.

Question 9

Who is this kit most suitable for?

Accepted Answer

This kit is best for buyers who want a practical 32GB DDR4 upgrade without paying extra for RGB styling. It fits mainstream gaming PCs, workstations for heavier multitasking, and older DDR4 platform refreshes. It is less suitable for buyers who want the newest DDR5 platform, advanced manual tuning, or premium aesthetics as a priority.

Question 10

Is this RAM a good fit for a typical DDR4 desktop upgrade?

Accepted Answer

Yes, if your motherboard uses standard desktop DDR4 UDIMM slots and supports 3200 MT/s memory. This kit is a 32GB (2x16GB) DDR4 desktop kit with Intel XMP 2.0 support, so it is well suited for gaming, multitasking, content creation, and general productivity on DDR4 platforms. It is not for laptops or DDR5-only systems.

Brand	CORSAIR
Series	Vengeance LPX
Model	CMK32GX4M2E3200C16

Capacity	32GB (2 x 16GB)
Type	288-Pin PC RAM
Speed	DDR4 3200 (PC4 25600)
CAS Latency	CL16
Timing	16-20-20-38
Voltage	1.35V
BIOS/Performance Profile	Intel XMP 2.0
Color	Black
Heat Spreader	Anodized Aluminum
Features	Designed for high-performance overclocking Each Vengeance LPX module is built with a pure aluminum heatspreader for faster heat dissipation and cooler operation; and the eight-layer PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for performance potential. Designed for great looks Available in multiple colors to match your motherboard, your components, or just your style. Performance and Compatibility Vengeance LPX is optimized and compatibility tested for the latest Intel 100 Series motherboards and offers higher frequencies, greater bandwidth, and lower power consumption. Low-profile heatspreader design The Vengeance LPX module height is carefully designed to fit smaller spaces.
Recommend Use	AMD 300 Series / AMD 400 Series / AMD X570 / Intel 300 Series / Intel 400 Series / Intel X299 / AMD 500 Series / Intel 500 Series

Best Sellers

Sponsored Products

CORSAIR Vengeance LPX 32GB (2 x 16GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Desktop Memory Model CMK32GX4M2E3200C16

Learn more about the Corsair CMK32GX4M2E3200C16

Customer Reviews of the Corsair CMK32GX4M2E3200C16

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16820236541