Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Showing Results: Most Recent
Other Thoughts: When I first put this RAM in my system, it started off at 1066 7-7-7. This surprised me a bit since most of the RAM I've seen defaults to 1333 9-9-9. Regardless, when I enabled the XMP profile, it put it self at its correct specifications 2000 9-10-9-27 2T. However, in order to run at that speed, my BCLK had to jump up from 133 to 200. This caused my mobo to automatically increase voltage on the CPU from 1.24 to 1.48. Since I was actually looking to overclock, but keep the stock voltage, I turned off the XMP profile and set the BCLK to 160, memory multiplier to 10, and the adjusted the memory timings to 8-9-8-24 1T. This gave me exactly the results I wanted.
I'm going to see if I can tighten up the timings a little more sometime later.
This review is from: ZALMAN CNPS9900MAX-R 135mm Long life bearing CPU Cooler Red LED
Other Thoughts: It should be noted that I'm using the connector for "quiet mode". I've noticed that even under load, my fan speed did not max out (was around 1300 RPM), but the cooler still performed amazingly.
Don't pay attention to any negative reviews, if the cooler is installed properly it works great. (Come on people, its not that hard!!!) The instructions are very clear, and ZALMAN has animated install instructions on their site if you need them.