Good Buy3/8/2016 7:47:17 AM

Pros: Good price. Well made (but see cons). MLC and not TLC. Going good for over three months in an always on PC. Pretty fast. (see cons)

Cons: Its made well and with a clever design with the connectors, but there seems to be no catch\lock for the latchable type SATA cables. The SATA cable may wiggle loose if not secured well to something in the case, it happened to me once just by poking around in the case one day. Its a bit on the poky side for an SSD. (It could be just my system, AMD 990FX chipset. The SATA ports are known to be slower with SSDs) For the price it still way better than mechanical drives.

Overall Review: It works well in a laptop but has a few issues in a desktop environment. I would buy again as long it stays an MLC drive.

2 out of 2 people found this review helpful. Did you? 
Manufacturer Response:
Thank you for choosing Mushkin. We appreciate your feedback and support.
Works for us6/17/2014 8:54:59 AM

Pros: Fast, quality prints, High Yield 12k+ page cartridge available.

Cons: Kinda expensive cartridges but what else is new.

Overall Review: I don't know what the problem is with the other buyers having so many issues with their printer but I work at a k12 school in the IT department and we have 6 of these printers in use for a year and never had an issue. Liked them well enough we bought 23 more.

Did you find this review helpful? 
The Best6/18/2013 3:42:10 PM

Pros: Made in USA. Comes with a good assortment of attachments. Long cord. All metal design, except for the nozzles. Removable foam filter on the bottom of the unit Works great and defiantly worth the money!

Cons: These are minor cons but here goes. As others have said it is loud but it more than makes up for that in money saved by not buying canned air. The soda straw attachment does choke down the air flow quite a bit but still works well enough. The foam filter does fill up very fast if you are cleaning very dirty machines so check it often.

Overall Review: We at our tech department (k12 school) uses this regularly to clean out our workstations\keyboards etc. It has performed perfectly through the many hours of use (or couple hundred workstations) during the two or three years we have owned it. One thing to note if you leave the big nozzles attached be careful not to let it fall or you will split them pretty easy. The unit can get very warm if used for long periods of time, this can be amplified if the filter is stopped-up. (The motor in this unit is cooled by the air flowing through it).

17 out of 17 people found this review helpful. Did you? 
Great if..1/25/2012 10:08:53 AM

Pros: Nice looking, very sturdy and 16x10. I really liked this monitor. If you can get these monitors with out defects they are great.

Cons: Well let me start. Two of these were ordered from another very reputable site. The first two were defective in the sense that one had debris in the LCD itself, the other had a cluster of about 7 to 10 stuck red pixels. Those were sent back and two more were sent out. Received the replacements, one was perfect so I checked the other and it had a stuck white pixel. Informed HP of this and they send out a replacement. Opened that one and found that it also had debris in the LCD. This has been a month of back and forth trying to get a a decent set of monitors. I have now given up and sending everything back for a refund. Thanks goes to the company for working with me on this. I'am pretty much disgusted with HPs quality on these high end monitors and will be looking at other brands. I was really looking forward to owing a pair of these. See other thoughts on HPs monitor policy.

Overall Review:

0 out of 2 people found this review helpful. Did you?