Date Joined: 11/13/07
Pros: Overclock 10900k 5.3 GHZ stable Games Prime95 etc1.43vcore bios load line lvl 4
Runs 4000mhz 16cl ram overclocked Easy Bios Setup
No issues with Ethernet controller once the driver and firmware was installed in Windows 10.
Wireless worked well till I got that done.
Cons: Cant think of any
Overall Review: Would recommend No issues with my board thus far.
Pros: Plenty of Power for a Highend system
wattmeter is a fun feature
Braided cables are nice however the cable combs are not the best better to get another brand of cable combs
Fixed an issue I was having with my system where the 3090 would drop the driver out and cause the need for a system reboort. After installing this PSU I have never been able to replicate the issue..previous PSU was a EVGA 1000wP2
Overall Review: Would recommend to anyone trying to run an overclocked intel system with a power hungry 3090
Pros: Keeps 10900k cool enough at 1.42 Bios vcore 5.2ghz all core prime 95 Easy install control fan speed from Bios no bloatware software to install. Recommend swaping thermal paste with something nicer like Kryonaut
Cons: Thermal paste preapplied didnt provide the best temps
Overall Review: Awesome Unique looking and works well on OC 10900k
Pros: Cheap Classy ti PCB Runs the 2888-KR bios no problem
Mine overclocks to 1230 on stock volts
Cons: None to speak of.
Overall Review: These chips are bin rejects from the kingpin bin process so while they are not extreme quality you can still have some fun with them they are not complete duds.
Pros: Gsync works great Colors are splendid no issues with this monitor at rated refresh rate (144hz).
Cons: High price Probably about 100 dollars more than what it should be.... but honestly if you want a really nice gsync monitor you can push with one gtx 780 or better card at ultra settings this monitor can do that for you.
Overall Review: People saying 1080p doesnt look good on 27 inch are wrong
Pros: Paid 536 for this 2 years ago still using it
Pros: I felt the need to post yet again this does work with the Classified MB no problem no adapter needed Cpu plug works fine use 8 pin connector and you can use two 4 pin side by side for the second 8 pin plug on board then if you run sli you can use the cables that have the 6pin and 8pin connectors
Need nothing extra for this to work
Pros: Not one problem can easily overclock from the devil clock speed from factory...Did have to RMA one but it happens got it back in 1 week brand new card with protective film over it. Meh writing this review now I always do these after I am almost done using these items cuz Fermi is here wooooot.
Cons: None BFG is Awesome
Overall Review: Ran 2 in SLI worked great one had a faulty capacitor after sometime np RMA was easy and fast still hold value on bay for money to go towards my Fermi Purchase
Pros: This thing is so awesome never gets hot I run 4 HD a I7 920 OC to 3.8 2 gtx 285 and 8 fans on the 760 classified MB Has on and off switch on the back unlike most PSU at this power rating.
It does have all the connectors you need to hook both power connectors to the cpu 1 full 8 pin and 2 4 pins that can be put in side by side to make the second 8 pin works just fine that way and that is how I have it done.(talking about the classified MB which has 2 cpu power connectors that is optional to use both) Both clips touch the locking clip to keep them in.
Overall Review: Not sure why they are so cheap for such quality but hey I guess I benefited from that. Though some may think because of the low price they are not as great as they are.
Pros: Looks nice will be good for mild overclock
Cons: to costly for its capabilities on a core I7
Overall Review: not here to bash but just to be honest
Pros: Very versatile on my motherboard for the speeds and timings I was able to run it at for such a low price ram.
Cons: I thought it would last longer because it started out so promising in the beginning....I have had this ram for close to 2 years now and as the sun started getting warmer the other day she started showing her tail lock ups and what not ...........knew my cpu was always stable so I used memtest and oh noes she is giving me errors while set at 800mhz eff and 44412 timings and 2.1v So lowered voltage to 1.9 and changed timings to 55513 and stayed at 800mhz and now test only showed 1 error after 6 hours of testing but done at night so I know the ram is pretty much on its last leg...and have a new 2x2gig ozc set coming
Overall Review: No more mushkin for me out of all the stuff I have in this sytem I was always good to my ram and it pooped on me
Pros: Great overclock ability with C2D unlink fsb from memory has every bell and whistle bios tune you could ask for and yes if you have vist it will need an immediate bios upgrade go to evga website get and all is well.
Cons: Don't overclock a quad
Overall Review: fits in a midtower