Skip to main content
cover
william m.

william m.

Joined on 05/14/07

0
0

Product Reviews
product reviews
  • 6
Most Favorable Review

Great Card

XFX Radeon HD 5770 (Juniper XT) 1GB GDDR5 PCI Express 2.1 x16 CrossFireX Support Graphics Card HD-577A-ZNFC
XFX Radeon HD 5770 (Juniper XT) 1GB GDDR5 PCI Express 2.1 x16 CrossFireX Support Graphics Card HD-577A-ZNFC

Pros: this card is all you need, , still cant understand why ppl would use cross fire, seems like a wast of money.

Cons: an aftermarket fan would help the noise issue

Best Drives For Speed

Western Digital WD VelociRaptor WD1500BLFS 150GB 10000 RPM 16MB Cache SATA 3.0Gb/s 2.5" Enterprise Hard Drive Bare Drive
Western Digital WD VelociRaptor WD1500BLFS 150GB 10000 RPM 16MB Cache SATA 3.0Gb/s 2.5" Enterprise Hard Drive Bare Drive

Pros: I have two of these in a raid-0 config. Yes they are lightning FAST.

Cons: I dont think they are loud at all, I cant even here them. And my PC is on a desk, 3 feet away from me ..humm

Overall Review: None

Accelero L2 Pro

ARCTIC COOLING Accelero L2 Pro Fluid Dynamic VGA Cooler for nVIDIA and ATI
ARCTIC COOLING Accelero L2 Pro Fluid Dynamic VGA Cooler for nVIDIA and ATI

Pros: if your not stupid u would look on the ARTIC COOLER web site and notice that the Pro is not intened 4 the 5770 ATI, THE Accelero L2 Plus IS! YOU YOUR NOGENS!

Cons: NONE

Overall Review: THINK B 4 YOU BUY!

Works Perfect

ZALMAN G200 Corrosion-preventive Coolant
ZALMAN G200 Corrosion-preventive Coolant

Pros: This is a flawless product, if used as intenened, in a ZALMAN water cooler, ther are no problems!

Cons: NONE

Overall Review: NONE

Zelman coolent

ZALMAN G200 Corrosion-preventive Coolant
ZALMAN G200 Corrosion-preventive Coolant

Pros: Iv used this for over 4 years, i put a while bottle in my system. i have never had any discoloration with my clear tubes,EVER, NORE ANY MINERAL BUILD UP BECAUSE I USE DISTILLED WATER, LIKE THE DIRECTIONS REQUIRE!

Cons: None

Overall Review: ppl that have problems might benifit if the read the directions!

try this for no problems

ARCTIC COOLING Accelero S1 Rev.2 VGA Cooler
ARCTIC COOLING Accelero S1 Rev.2 VGA Cooler

Pros: why heat synks wont stick. try useing a 2 stage cleaner to clean were heat synks were, 2nd cleaner pureifys were you will place the heat sync. DO NOT use the tape on the heat syncs, use a 'thermal epoxy',useing the 2 stage cleaner to remove the tape, clean, and purify it, all are from artic! makers of artic 5! i used a software pro on my ATI based 8350 temps were 42 C.

Cons: seems most people dont really know what ther doing, all u have to do is read! read all u can, thats how I learned. thermal tape is out! seems non ATI cards are boiling hot stock.

Overall Review: iv read most reviews, most are negitive, point is, cure all -dont use thermal tape! also if you have never installed a after market vga cooler, the directions ARE COMPLETE, you just dont know what your doing yet.