Skip to main content
  • $1.00
  • Free 30-day Returns
  • Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    Darkside 6mm (1/4") High Density Cable Sleeving - Aqua Blue UV, 1ft (DS-0763)

    • DarkSide 6mm (1/4") high density cable sleeving in Aqua Blue UV with an ultra tight weave, typically used for a few power wires, such as power supply wires, pump wires or a 4-wire RGB LED cable
    • Custom cut to order and priced per foot
    • DarkSide 6mm (1/4") high density cable sleeving in Aqua Blue UV with an ultra tight weave, typically used for a few power wires, such as power supply wires, pump wires or a 4-wire RGB LED cable
    • Length: 1ft
    • Included: Custom cut to order and priced per foot.
    +
    +
    Overview
    Specs
    Reviews

    Any questions? Ask CelesteSM will help you find out quickly.

    DarkSide 6mm (1/4") high density cable sleeving in Aqua Blue UV is braided sleeving with an ultra tight weave for custom cable modding. The 6mm size is typically used to sleeve a few power wires together, such as power supply wires, pump wires or the four wires of an RGB LED cable. The color is UV reactive: it glows under UV (black) light.

    Properties

    • Type: High density braided cable sleeving
    • Size: 6mm (1/4")
    • Expands to: about 11 mm
    • Typical use: A few power wires, such as power supply wires, pump wires or a 4-wire RGB LED cable
    • Color: Aqua Blue UV
    • Sold by: The foot, custom cut

    Ultra tight high density weave

    DarkSide high density sleeving is woven with an ultra tight weave for custom cable modding. The dense braid covers the wires underneath, so a cable set of mixed black, red and yellow wires turns into neat, even runs in the color you choose.

    A few wires in one sleeve

    The 6mm size is typically used to sleeve a few power wires together, such as power supply wires, pump wires or the four wires of an RGB LED cable. At rest it measures 6 mm and it opens up to about 11 mm.

    Cut to the length you need

    ModMyMods custom cuts this sleeving to order and prices it per foot: the length you order is the length you receive. Add up the lengths of all the wires you want to sleeve and order the total.

    Working with braided sleeving

    • Pushed together, braided sleeving widens; pulled, it narrows and closes around the wire. That is how it slides over a wire and then sits snug.
    • For single-wire sleeving, take the terminal out of the connector, slide the sleeve over the wire, finish the ends and put the terminal back in its original position.
    • Finish the cut ends so they do not fray, usually with a short piece of heat shrink tubing at each end.
    • Plan a little extra length per wire for finishing the ends.

    Other sizes

    DarkSide high density sleeving is also available in 2mm (5/64") for single AWG18 power supply wires, in 4mm (5/32") for small bundles such as 2-3 fan wires or LED wires, and as 10mm (3/8") SATA sleeving for SATA data cables.

    Technical data

    • Brand: DarkSide (DazMode)
    • Type: High density braided cable sleeving
    • Nominal size: 6 mm (1/4", 0.24")
    • Maximum expanded size: about 11 mm
    • Typical use: A few power wires, such as power supply wires, pump wires or a 4-wire RGB LED cable
    • Color: Aqua Blue UV (semi-transparent)
    • Sold by: The foot, custom cut to order

    Notes

    • ModMyMods carries DarkSide 6mm high density sleeving in Aqua Blue UV, Arctic Camo, Black, Commando II UV, Dark Blue UV, Frosted White, Gold, Graphite, Green UV, Gun Metal, Lava II UV, Metal Jacket, Metallic Red, Opaque Red, Orange II, Purple UV, Red UV, Titanium Gray, White and Yellow II UV. This listing is Aqua Blue UV.
    • Colors on screen can look slightly different from the sleeving in hand, especially the UV colors, which are photographed both in normal light and under UV light.

    In the box

    • 1x DarkSide 6mm high density cable sleeving, Aqua Blue UV, cut to the length ordered (per foot)

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    • Return for refund within: 30 days
    • Return for replacement within: 30 days
    • This item is covered by ModMyMods Return Policy

    Manufacturer Contact Info

    LOADING...