The BA7020-US5 Six bands mobile signal booster repeater works for all the American countries 2G 3G 4G mobile networks, it provides an affordable solution to solve the indoor signal coverage problems due to signal fading and attenuation caused by architecture obstacles. And its easy installation and maintenance can help carrier get fast return. The repeater is working as a relay between the BTS and mobiles. It picks up the strongest signal from BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Indoor Signal Distribution System to the weak/blind coverage area.
And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction. The coverage of the EB7020US5 up to 12000 sq ft depends on the outside signal strength which is received from the cell tower. With the help of the booster, you can improve your CDMA and GSM voice communication experience, moreover, it will speed up the 3G 4G internet.
The full kit contents: 1, BA7020-US5 booster. 2, Outdoor omni antenna. 3, Indoor panel antenna. 4, Outdoor 65ft RG58 cable. 5, Indoor 16ft RG58 cable. 6, Power supply and other mounting accessaries.
HOW DO INSTALL THE BOOSTER: 1, Walk around your roof to find the strongest signal location, mount the outdoor antenna, and let it points towards to the cell tower. 2, Install the booster indoor where nearby the power outlet, make sure it is ventilated and away from heat sources and moisture. 3, Connect the outdoor antenna to the BS port of the booster by the outdoor cable provided. Try to make the VERHICAL distance from outdoor antenna to indoor antenna as long as possible (at least 20 feet), a thick barrier is required such as a roof or a wall between the outdoor and indoor antenna. 4, Indoor antenna connect to MS port by the indoor cable provided. 5, Connect the booster to the AC supply once all the connections done. 6, Make sure the outdoor signal strong enough to cover the area you need, stronger outdoor signal wider coverage.
Note: This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. This device may be operated ONLY in a fixed location for in-building use. We provide one month Money Back, and three year quality guarantee.