G.SKILL Ripjaws X + Turbulence II Series 16GB (4 x 4GB) DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9Q-16GBXLD

Pros: Inserted all 4 modules into my ASUS P8P67 Deluxe ( BIOS Version 1503) and selected XMP Profile #1 and OCd to 4.4GHz (initially), made minor adjustments to DIGI+ VRM and absolutely no problems (been about 2 weeks now). Have run Prime95 and AIDA64 with no crashes. WEI 7.9

Cons: The fan blocks the USB 3.0 connector. However, my large CPU cooler is part of the problem.

Overall Review: Fan looks great and is quieter than expected. Very happy with the purchase.

Pros: Put this in my new ASAS Maximus IV Extreme ROG motherboard and it works like a dream. Have not tried to overclock it, and am not sure I will even try. The fan fit well after bending in the tabs and the blue leds in the fan look great. Great RAM for the price.

Cons: None

Pros: Good looking RAM. Fit onto motherboard as expected. Went into BIOS, selected Profile 1. RAM is now running at 2133MHz with the advertised speed settings. No problems with getting the fan to fit over the RAM.

Cons: None.

Overall Review: It's 16Gigs of RAM running super fast, cannot ask for much more. Running it on an ASRock P67 Extreme6 motherboard and couldn't be happier.

Pros: Cheap for 2133 ram. Works at specs.

Cons: Cooler design is really bad. Metal is soft and cooler is barely hanging in there. So bad, that at first I decided not to use the cooler at all, which played a trick with me later (see below).

Overall Review: At first I couldn't pass Prime95 my i7 2600k even at stock speed - I was getting errors within an hour at just about any vcore. When I decided to remove two DIMMs I found they were running really hot. So, I put the fan back in, set vcore to 1.35 and bingo - a night of no failures at 4.6GHz on Prime95.

Pros: i'm a Noob when it comes to building computers. And it doesn't get easier then this. Threw all 4 Sticks in booted it up. Works like a Charm! Bios Reads all Sticks 16gigs at 2133. Works As advertise speed! Gotta Love G.skill! Those of you writing bad Reviews Make sure your Motherboard is compatible with the RAM. Vice Versa! Check the G.skill website to see if it's compatible with your MOBO!

Cons: Blue LEDs on fan doesn't Match the RED Sticks.??? oh well i can live with that

Overall Review: AsRock Fatal1ty P67 mobo Intel i7 Sandy Bridge 2600k Cooler Master Hyper 212 plus CPU fan cooler G.Skill 16gigs DDR3 2133 Western Digital Raptor 150gig. 10,000 RPM HDD nvidia GTX 560 TI. (2X for SLI) Tagan BZ Series 1100 watt PSU Rosewill Armor Case

Pros: 16 gigs, low profile heat spreader. fits with my noctura and gd65 mobo.

Cons: wont boot at 2133 as advertised. Havnt messed with it much, but setting voltage to 1.6 and clock to 2133 wont boot. Have em running at 1866 now.

Pros: RAM works great in my P67 build. Couldn't beat the price for 16GB for extremely fast memory. I'm using the Gigabyte P67A-UD5-B3 board. No issues and works great.

Cons: Not a con, but make sure the bios is configured correctly for this RAM.

Pros: Installed in a Gigabyte GA-P67A-UD7-B3 mother board with a 2600K processor. Set BIOS to Profile 1. Works at 2133 with no problems.

Cons: Probably overkill for what I needed!

Overall Review: This was put in to a around daliy use desktop. I went ahead a got the 16Gb for running virtural machines with VirtualBox.