Question 1

A couple simple questions:

1. Are the RGB LEDs powered and controlled through the RAM bus or through external header connections?

2. Can you turn off the LEDs?

3. Can you change the LED brightness?

Accepted Answer

1.  There is no external power connector, so I believe this is powered through the Ram bus.
2-3. It's possible with a compatible motherboard software.  For instance, I have an Asus board with the Aura Sync software, and I am able to change these things that you describe.

Question 2

will this work with ryzen 1800x and x370?

Accepted Answer

This memory is rock-steady in my Intel system at every speed I've tried, but to be sure, you really need to check the QVL associated with the specific MB model you intend to use it with.

Question 3

Is this Samsung B-Die? And how can you tell what die it is?

Accepted Answer

Word on the street is that every 3200 14-14-14 ram is b-die. If you want to know whether this kit works well with ryzen, i can say it does. I have an ASRock fatal1ty professional x370 with an 1800x, and it works flawless at 2933MHz. I never got to 3200 MHz, but i didnt try that hard. I just set xmp profile.

Question 4

is this rgb version ? im looking for f4-3200c14d-32gtzr

Accepted Answer

Yes hence the “rgb series” listed in the name

Question 5

On the ram timings, where it shows Timing 14-14-14-34 for example, is the lower number the better or the higher the number? Thank you!

Accepted Answer

Lower number is better for all instances when it comes to RAM timings.  The number generally represents how many clock cycles the CPU has gone through until X RAM timing  setting is repeated or available for use again.

Question 6

Can I use 2 sets to get 64gb ram on a asus x299 motherboard?

Accepted Answer

As long as your motherboard supports 64GB of Quad channel memory (I assume x299 does).  There is a little bit of a lottery with ram sticks if you buy 2 dual channel sets, however I've done this before when upgrading ram, so there is a good chance it will work.  Although by buying a quad channel kit, there is more of a guarantee that they will work together in your system.

Question 7

hello

my computer >

cpu = i9-10850k
mainboard = Z490 unify
I purchased the F4-3200C14D-32GTZR model from newegg, but the XMP is not applicable.
Manual overclocking is also not applicable for more than 2900.
What should I do? Help me.

Accepted Answer

Do not use command rate 1T/1N.  The older bios has bugs with 1T.  The newest beta bios from Toppc Lin should fix this issue.  I do not own a MSI board so I am unable to offer further assistance.  Refer to the RAM discussion channels on overclock dot net.

Question 8

Will this work with the ASRock X570M PRO4 & RYZEN 9 3900X? I saw the X570 Pro4 listed on G.SKILL's QVL page.

Accepted Answer

It works on my X570 Tachi board. And if it's on the QVL list, it will work,  as the motherboard company has tested it.

Question 9

Will this memory work with the ASUS Crosshair Hero VII X470 out of the box? AND will it work with two kits to equal 64GB of RAM?

Accepted Answer

Yes,

Question 10

Is this compatible with the MSI XPower Gaming Titanium Z270 motherboard?

Accepted Answer

I am using an Asus Maximus IX HERO motherboard so I cannot answer your question about MSI. But, you can probably go to the MSI website and look up the QVL (qualified vendor list) to see which memory sticks are compatible with your system. This is what I did for mine and the sticks are working great. Good luck!

Questions & Answers