Your Browsing History

Brand | Tripp Lite |
---|---|
Model | N784-H01-SCMM |
Device Type | Converter |
---|---|
Media Conversion | Fiber to Ethernet |
Standards | IEEE802.3, IEEE 802.3u |
Wavelength | 1310nm |
Ports | RJ45 (FEMALE); SC DUPLEX (FEMALE) |
Max Distance | 2 km |
Transfer Rate | 10 Mbps; 100 Mbps |
LEDs | PWR(Power LED), ALM (LFS function indicator), Fiber - 100 (For Ethernet speed 100Mbps), LNK/ACT (Fiber port data transmitting/receiving), RJ45 - 100 (For RJ45 speed 10/100Mbps), LNK/ACT (For Copper port data transmitting/receiving) |
Power Adapter | Input: 100-240V, 50/60Hz, 0.5A; Output: 12V, 1.5A |
Temperature | Operating Temperature Range: 14 to 140F (-10 to 60C) Storage Temperature Range: -40 to 185F (-40 to 85C) |
---|---|
Humidity | 5% to 95% RH, Non Condensing |
Feature | Extends a Network Connection up to 2 km over SC Multimode Fiber Optic Cable This network media converter converts a copper Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to two kilometers (1.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCMM with multimode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Link Fault Signaling and Loop Back Functions Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic Functions Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. Protective Metal Housing Built to Withstand a Variety of Hazards The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting. Works in Tandem with Tripp Lite's N785-CH12 Chassis House and power up to 12 Tripp Lite media converters, including the N784-H01-SCMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation. TAA-Compliant for GSA Schedule Purchases |
---|
Dimensions | 0.92" x 2.91" x 4.30" |
---|---|
Weight | 0.53 lb. |
Package Contents | N784-H01-SCMM Media Converter L-shaped bracket Rubber foot SC connector cap External power supply with NEMA 1-15P plug (Input: 100–240VAC, 50/60 Hz, 0.5A; Output: 12VDC 1.5A) DIN rail kit Wall-mounting hardware Quick Start Guide |
---|
Date First Available | April 03, 2025 |
---|
Warranty Notice:
This product does not include manufacturer warranty when purchased or used outside of its designated sales region. By purchasing internationally, you acknowledge that warranty support from the manufacturer will not be available.