Specifications: Pro3000 Analog Toner Specifications
User interface:
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency:
1000 Hz nominal
Alternating Frequency:
1000/1500 Hz nominal
Over Voltage Protection:
60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode:
8 dbm into 600 ohms
Output Voltage Level in Continuity Mode:
8 Vdc with fresh battery
Battery:
9V alkaline
Temperature:
Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions:
2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally bei...
Specifications: Application/Usage: Cable Termination
Additional Information:
Unique design easily accommodates close-to-wall installation.
Replaceable blade head for use with multiple jack types.
For Leviton 61110, 5G110, 6110G.
Specifications: Number of Batteries Supported:1
Product Type:Cable Analyzer
Network (RJ-45):No
Package Contents: NX8 Unit
Toner
8 x ID Caps
66 Block Adapter
RJ-11 Adapter
Dial Tone Detective
Alligator Clips with RJ-11 Adapter
F-type (F, 9-M-push, M-71, Speed 81) Adapters
1 x AAA Battery
Deluxe Case with Belt Clip
Package Contents: Fiber Optic Cleaning Kit
Cleaning Cube with Wipes
10 x Cards with Sealed Cleaning Zones
Solvent Pen
2.5mm Port Cleaning Swabs
1.25mm Port Cleaning Swabs in a Rugged Carrying Case
Specifications: Part Number MT-8203-20
Item Weight 3.2 ounces
Product Dimensions 12 x 3.8 x 3.1 inches
Item model number MT-8203-20
Size With Bed of Nails Set
Item Package Quantity 1
U-shaped nose for blade-shaped terminals
Notched jaw for gripping screw heads, bare wire or terminals
Serrated teeth for gripping threaded or wire wrapped terminals
Cluster of sharp needles for piercing small gauge wires (22-28 AWG)
Large piercing needle for penetrating large gauge wires
Specifications: Fluke Networks in-line banjo modular adapters allow you to easily complete testing and obtain circuit access on working lines without disrupting service. Each banjo modular adapter has a number of advantages including angled copper contacts that prevent alligator clips from coming off during testing, small holes in each contact for easy probe insertion, and clear circuit markings on the sides and bottom of the unit.
Our standard Banjo Modular Adapter has four clearly marked contacts for proper termination, and provides field technicians with a quick connection to modular telephone jacks using any standard butt-set equipped with spring clips.