Asterisk Card TDM410 with 4 FXO Port,PCI Interface,Supports Asterisk FreePBX Issabel Dahdi Free PBX,PCI Board For SIP phone System TDM400P

Asterisk Card FXO Card TDM410 with 4 FXO Ports
TDM410P Supports Asterisk,Dahdi,Freepbx,Issabel,Free PBX,VitalPBX,Freeswitch
Interface : PCI
The FXO module is in red and the FXS model is in green.
FXO port connects to traditional telephone line (PSTN line) and the FXS port connects to a telephone set (traditional analog telephone).
Using the card, open source software and PC,you can build a telephone system/ IP PBX / call center VoIP Gateway Trunk appliance easily at a very low cost.

Features

Asterisk FXO Card Analog Voice Telephone Board
Ports : 4 FXO
Interface : PCI
Software Supported : Asterisk,Dahdi,Freepbx,Issabel,Free PBX,VitalPBX,Freeswitch and other software based on Asterisk/Dahdi
Using the card, open source software and PC,you can build a VoIP telephone system/ Asterisk PBX Phone System / call center VoIP Gateway Trunk appliance easily at a very low cost

Tips

The card is bundled with 4 FXO modules.
The FXO module is in red and the FXS model is in green .
FXO port connects to PSTN line (traditional telephone line) and the FXS port connects to a traditional telephone set.

Asterisk ,Dahdi, Issabel, Freepbx Settings:

[Issabel.localdomain ~]# dahdi_genconf
[Issabel.localdomain ~]# dahdi_cfg -vvvv
DAHDI Tools Version - 2.2.0
DAHDI Version: 2.2.0
Echo Canceller(s): MG2
Configuration
======================

Channel map:

Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)

[Issabel.localdomain ~]# asterisk -vvr

Issabel*CLI> dahdi show channels

pseudo default en default In Service
1 from-pstn en default In Service
2 from-pstn en default In Service
3 from-pstn en default In Service
4 from-pstn en default In Service