Specifications: Connect a PCIe M.2 SSD (NVMe or AHCI) to your computer through PCI Express for ultra-fast data access
x4 PCI Express to M.2 PCIe SSD Adapter
M.2 NGFF SSD (NVMe or AHCI) Adapter Card
x4 PCIe expansion card
Expansion bay adapter supports M key M.2 NGFF PCIe SSD
Add a high speed 4-lane M.2 NGFF SSD such as Samsung 950 Pro or Samsung SM 951 to your PC
Wide compatibility with M.2 SSDs (NVMe and AHCI): 110mm, 80mm, 60mm and 42mm
OS independent for fast and easy set-up
Specifications: Converter Type: Passive
Audio Specifications: 5.1 Surround Sound
Maximum Digital Resolutions: 1920 x 1200 / 1080p
System and Cable Requirements: DP++ port (DisplayPort ++) required on video card or video source (DVI and HDMI pass-through must be supported)
Specifications: 5-15R to C14 adapter allows you to connect your PC or other device with a NEMA 5-15P plug to a UPS with a C13 power outlet.
Recommended for powering computers, printers and other peripherals
Converts a NEMA 5-15P connector into a C14 connector to match available outlet
Specifications: Audio Specifications: HDMI output - 7.1 surround sound; DVI output - 2-channel stereo audio
General Specifications: Only one video output is supported on the video adapter at a time. If multiple connections are made, only one of the outputs will function.
Maximum Analog Resolutions: 1920 x 1200
Maximum Digital Resolutions: 3840 × 2160
Maximum Power Delivery Support: None
Supported Resolutions: HDMI output: 3840 x 2160 (@ 30 Hz), 2560 x 1600, 2048 x 1280 (@ 60 Hz), 1920 x 1200, 1920 x 1080, 1280 x 720; VGA and DVI output: 1920 x 1200 (@ 60 Hz), 1920 x 1080, 1280 x 720
Video Revision: DisplayPort 1.2
Wide Screen Supported: Yes
Output Connector: 1 x HDMI (19 pin) Female Output
1 x DVI-I (29 pin) Female Output
1 x VGA (15 pin, High Density D-Sub) Female Output
Specifications: Drive Connectors 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors 1 - USB 3.1 USB Type-A (9 pin; Gen 2; 10 Gbps) Male
Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate): SATA
Drive Size: 2.5in
Interface: USB 3.1 Gen 2
Number of 2.5 inch bays: 1
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate : 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
UASP Support: Yes
Specifications: Connects a USB-C or Thunderbolt 3 PC, laptop or tablet to a wired Ethernet network
Provides instant access to Gigabit speeds without an internal Ethernet card
Simplified connections with a reversible Type-C connector that plugs into your device’s port in any direction
Easy to install with plug-and-play operation - no software or drivers required
Ultra-compact design for easy transport
Specifications: Fits in Standard 5.25 inch Driver Bay and may not fit in chassis with customized Bay Please ensure the 5.25 inch Driver Bay of your computer is standard size before ordering this item.
2 x 2.5 - inch Drive could Mounted to this ITEM at the Same Time. However Mounting only ONE drive is recommended for heat dissipation.
SATA III 6Gbps data cable included
Molex to SATA 15-pin power cable include, support 12V/5V PSU
Package Contents: Mounting Bracket
12 (6+6) inch Molex 4 Pin to x2 15 Pin SATA Power Cable with Net Jacket
10inches SATA III 6Gbps Data Cables with latch locking
1x Mounting Screws Pack is included
Specifications: Computer Connections
Direct 2
Port Selection Remote control selector button
LEDs
Port Status White
Switches
Port Selection: Remote Console Selector Button x 1
Operating Temperature: 32 ~ 104F (0 ~ 40C)
Storage Temperature: -4 ~ 140F (-20 ~ 60C)
Humidity: 0~80%
Housing
Case: Plastic
Cable Length: 54" (137.16cm)
Cable Type : USB 3.0 Type B to A x 4
Power Consumption: DC 5V, 1.43W
Operating System Support: Windows Vista®, Windows® 7, Windows® 8, Windows® 8.1, Mac OS X 10.3+, Chrome OS™, Linux-based systems