All CategoriesAll Categories- Free 30-day Returns
- ¥5,419 Shipping
¥61,216
Consumption Sales Tax-Inclusive Price
Ships from United States.
Sold by Newegg
Shipped by Newegg
Add to Wish List(Found on 1 wish list)
NETGEAR SFP+ Transceiver, 10GBase-SR for multimode 50/125µm OM3 or OM4 fiber | AXM761
- Adds 10 Gigabit Ethernet “short-reach” fiber connectivity to the two built-in 10 GE SFP+ interfaces of GSM73xxSv2
- Adds 10 Gigabit Ethernet “short-reach” fiber connectivity to the GSM73xxS/GSM73xxSv2 via the AX743 SFP+ Adapter module
- Drive 10 Gigabit Ethernet up to 300m
- LC connector and “short-reach”
- Drives 10 Gigabit Ethernet up to 300m distances with 50/125µm OM3 multimode fiber cables
+
+
Overview
Specs
Reviews
Netgear ProSafe AXM761 10GBASE-SR SFP+ - 1 x 10GBase-SRApplication/Usage: Data NetworkingInterfaces/Ports: 1 x 10GBase-SRInterfaces/Ports Details: 1 x 10GBase-SRConnectivity Media: Optical Fiber 10GBase-SRData Transfer Rate: 10 Gbps Gigabit EthernetCompatibility: ProSafe GSM7352S Gigabit Layer 3 Stackable Switch
Warranty & Returns
Warranty, Returns, And Additional Information
Return Policies*
- Return for refund within: 30 days
- Returns are subject to restocking fees and return shipping fees. Please click here to learn more about restocking fees and return shipping fees.
- This item is covered by Newegg.com's International Order Return Policy.
- Read full return policy for details.
- *Subject to applicable law
Warranty Notice:
This product does not include manufacturer warranty when purchased or used outside of its designated sales region. By purchasing internationally, you acknowledge that warranty support from the manufacturer will not be available.
Manufacturer Contact Info
- Manufacturer Product Page
- Manufacturer Website
- Support Phone: 1-888-638-4327
- Support Website
- View other products from Netgear Inc.
LOADING...
LOADING...
The NETGEAR AXM761 is an 850 nm, 10GBase-SR SFP+ transceiver for network operators who need a 10 Gigabit Ethernet fiber link over multimode fiber, with a stated reach of up to 300 m on 50/125 µm fiber.
Recommended For
- Network administrators adding a 10GbE fiber uplink between compatible NETGEAR switches in a server room or building, where the run uses multimode OM3/OM4 fiber and LC connectors.
- IT teams replacing a slower link between network switches with 10GBASE-SR, when both devices have compatible SFP+ ports and the existing multimode fiber run is within the module’s reach.
- Installers working with supported NETGEAR switch models who want a NETGEAR-listed transceiver rather than relying on unverified third-party module compatibility.
- Teams reusing an existing OM3/OM4 multimode fiber path for a short-reach 10GbE connection, instead of installing single-mode fiber for that link.
Real-World Use Scenarios
- Link two compatible switches for a 10GbE uplink: install an AXM761 at each end and connect them with duplex LC multimode fiber; this can provide a 10GbE path between switches over up to 300 m of OM3 or 550 m of OM4 fiber.
- Connect a server or NAS with an SFP+ port to a compatible switch for high-speed local file transfers or backups; the link can run at 10GbE, though actual transfer speeds also depend on the endpoint, storage, and network.
- Use an existing OM3 or OM4 fiber run to connect equipment in separate rooms or wiring areas; the short-reach fiber link can span longer distances than a typical in-room patch connection, within the cable’s supported reach.
- Add a 10GbE fiber connection to a compatible managed switch that has an available SFP+ slot; check the switch’s supported-module list first, since support depends on the switch model.
- When a fiber connection does not come up, verify that the two fiber strands are crossed correctly and that both switches support 10GbE on the ports in use; community troubleshooting identifies swapped LC strands as one possible cause.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | 10GbE short-reach multimode-fiber links, with an LC connection and reach up to 300 m on 50/125 µm fiber |
| Optical Interface And Standards | 10GBase-SR SFP+ transceiver using an 850 nm wavelength and LC connector; complies with IEEE 802.3ae |
| Fiber Reach | 2–300 m on 50/125 µm multimode fiber and 2–33 m on 62.5/125 µm multimode fiber |
| Operating Environment | Operates from 32–158°F (0–70°C); storage range is 32–185°F (0–85°C); operative relative humidity is 85% at 25°C |
| Power And Reliability | Power consumption under 1.0 W; MTBF 4,986,536 hours |
| Safety And Environmental Compliance | UL 1950 and CSA 22.2 No. 950 certified; RoHS compliant; Class 1 laser product |
| Physical Specifications | 11.9 × 13.7 × 55.7 mm (0.46 × 0.53 × 2.19 in); weighs 17.1 g |
| Model Identifiers | NETGEAR AXM761 |