Features
- Asterisk FXO Card Analog Voice Telephone Board
- Ports : 4 FXO
- Interface : PCI
- Software Supported : Asterisk,Dahdi,FreePBX,Issabel,Free PBX,VitalPBX,Freeswitch and other software based on Asterisk/Dahdi
- Using the card, open source softwares based on Aterisk,such as FreePBX,Issabel and stand alone PC, users can create their Asterisk PBX,SOHO telephony solution,VOIP PBX,business VoIP phone system,call center include all the sophisticated features of traditional PBX, and extend features such as voice mail,IVR,Call meeting,SIP trunk,outbound route,inbound route,call waiting ,call forwarding ..
Tips
The card is bundled with 4 FXO modules.
The FXO module is in red and the FXS module is in green .
FXO port connects to PSTN line (traditional telephone line) and the FXS port connects to a traditional telephone set.
Asterisk ,Dahdi, Issabel, Freepbx Settings:
[Issabel.localdomain ~]# dahdi_genconf
[Issabel.localdomain ~]# dahdi_cfg -vvvv
DAHDI Tools Version - 2.2.0
DAHDI Version: 2.2.0
Echo Canceller(s): MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)
[Issabel.localdomain ~]# asterisk -vvr
Issabel*CLI> dahdi show channels
pseudo default en default In Service
1 from-pstn en default In Service
2 from-pstn en default In Service
3 from-pstn en default In Service
4 from-pstn en default In Service
