Specifications: This coupler links two fiber optic cables with LC connectors for duplex or simplex cable assemblies in a faceplate or keystone panel.
Dual LC/LC coupler for extending cables in a faceplate or keystone panel
High-precision mating structure with low insertion loss
Duplex adapter accepts two simplex connectors or one duplex connector
Works with 62.5/125 or 50/125 multimode fiber cables
Specifications: Drive Connectors 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors 1 - USB 3.1 USB Type-A (9 pin; Gen 2; 10 Gbps) Male
Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate): SATA
Drive Size: 2.5in
Interface: USB 3.1 Gen 2
Number of 2.5 inch bays: 1
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate : 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
UASP Support: Yes
Specifications: 2.5in & 3.5in
Drive Connectors 1 - SATA (7 pin; Data) Receptacle
Host Connectors 1 - mSATA (52 pin; Mini SATA) Male
Max Drive Capacity Currently tested with up to 4TB 7200 RPM hard drive
Type and Rate SATA III (6 Gbps)
Specifications: Long-Distance Data Transfer to 4 Devices - Up to 164 ft. (50 m) from the Source
Send data to as many as four USB 2.0 devices located up to 164 ft. from the source
USB signals travel over a single user-supplied Cat5/Cat6 cable
Includes transmitter with built-in USB-A cable and 4-port receiver hub
Supports data transfer rates up to 480 Mbps
Greater Distance over Cat5/Cat6 Cable Provides Greater Flexibility
Cat5/Cat6 cabling exceeds the 16 ft. distance limitation of USB cables
Allows connection to devices that lack network connectivity in areas beyond the reach of standard USB cables
Makes connections in areas without network availability
Allows source to be in a secure location, separate from peripherals
Cat5/Cat6 cabling is cost-effective and readily avai...
Specifications: Chipset ID: MCT - Trigger 1+
Memory: 16MB SDRAM
USB Pass-Through: No
General Specifications: This USB video adapter uses a Trigger family chipset. If you’re connecting this device to a computer along with additional USB video adapters or docking stations, please avoid using devices with a DisplayLink or Fresco family chipset.
Supported Resolutions: Standard (1600 x 1200, 1400 x 1050, 1280 x 1024, 1280 x 960, 1152 x 864, 1024 x 768, 800 x 600) / Widescreen (1680 x 1050, 1440 x 900, 1280 x 800, 1280 x 768, 1152 x 864, 800 x 600)
Connector A: 1 x USB Type-A (4 pin) USB 2.0 Male Input
OS Compatibility: Windows 10 (32/64) / Windows 8 / 8.1 (32/64) / Windows 7(32/64) / Windows Vista (32/64) / Windows XP (32/64)
System and Cable Requirements: One available USB 2.0 port
Specifications: 15 ft. USB-C to DisplayPort Cable - 4K 60Hz
The USB-C to DisplayPort cable provides a solution to connect USB-C devices that support DisplayPort alternate mode (DP alt mode) to DisplayPort displays. The 6 feet length efficiently connects MacBooks, Chromebooks, and other USB-C devices that support DisplayPort Alternate Mode (DP Alt Mode) to displays without needing an additional DisplayPort cable.
4K / 60Hz Resolution
Support for resolutions up to 4K / 60Hz allow you to output onto 4K monitors to display Ultra HD resolutions up to 3840x2160 / 60Hz. Perfect for streaming HD content and playing Blu-ray media. The 6ft length also provides a longer length for use with a wide variety of setups. The DisplayPort male end also eliminates the ...
Specifications: Audio Specifications: 7.1 surround sound
Maximum Analog Resolutions: 1920 x 1200 or 1080p
Maximum Digital Resolutions: 3840x2160 @ 30 Hz
Supported Resolutions: 1024 x 768, 1280 x 720 (High-definition 720p), 1920 x 1080 (High-definition 1080p), 1920 x 1200, 2560 x 1440, 2560 x 1600, 3840 x 2160 (Ultra HD 4K)
Wide Screen Supported: Yes
Connector A: 1 x USB-C (24 pin) Male Input
Specifications: Analog Video Compliant: VESA
Input: DisplayPort Male
Output: VGA Female
Bandwidth: Triple 10-bit, 162 MHz Video DAC for VGA
Video Resolution: Supports video resolutions up to 1920x1200 / 1080P (Full HD)
EDID: Pass-through, Automatic sink detection
Driver: Plug and Play, No Software to Install Power by: DisplayPort source
Specifications: Audio: Yes
Chipset ID: T5-302/MCT
Output Signal: HDMI
USB Pass-Through: No
Audio Specifications: 2-Channel Stereo (48Khz)
General Specifications: This USB video adapter uses a Trigger family chipset. If you’re connecting this device to a computer along with additional USB video adapters or docking stations, please avoid using devices with a DisplayLink or Fresco family chipset
Maximum Digital Resolutions: 1920 x 1200 / 1080p
Supported Resolutions:
Widescreen(16/32 bit):
1920 x 1200, 1920 x 1080, 1680 x 1050, 1600 x 900, 1440 x 900, 1360 x 768, 1280 x 800, 1280 x 768, 1280 x 720
Standard(16/32 bit):
1600 x 1200, 1400 x 1050, 1280 x 1024, 1280 x 960, 1152 x 864, 1024 x 768, 800 x 600
Connector A: 1 - USB Type-A (9 pin) USB 3.0 Male Input
Connector B: 1 - HDMI (19 pin) Female Output
Humidi...
Specifications: DisplayPort Compliant: DisplayPort V1.2
DVI Compliant: DVI 1.0
Content Protection: DPCP & HDCP Input: DisplayPort Male
Output: DVI-D Female
TMDS Clock Rate: 225MHz max. Bandwidth: 6.75 Gbps
Video Resolution: 1080p @60Hz, 1920x1200 (reduced blanking)
3D Video Support: No
Audio Support: No AMD Eyefinity: up to 6 displays (depending on graphic card) Driver: Plug and Play, No Software to Install Power by: DisplayPort source
Specifications: Audio: Yes
Rack-Mountable: No
Max Distance: 35 m / 115 ft
Maximum Cable Length: 114.8 ft [35 m]
Maximum Digital Resolutions: At 10 m, Up to 4K at 60Hz; At 25 m, Up to 4K at 30Hz; At 35 m, Up to 1080p
Supported Resolutions: 3840x2160 (4K), 2560x1600, 1920x1200, 1920x1080 (1080p), 1280x720 (720p)
Wide Screen Supported: Yes
LED Indicators: 1 - Power LED
Power Source: USB-Powered
Specifications: Center Tip Polarity: Positive
Input Current: 0.8 A
Input Voltage: 100 ~ 240 AC
Output Current: 3 A
Output Voltage: 5 DC
Plug Type: M
Power Source: AC Adapter Included