Specifications: Device Supported: Flat Panel Display, Notebook
Maximum Load Capacity: 25.00 lb
Maximum Screen Size Supported: 42"
Color: Polished Aluminum
VESA Mount Compatible: Yes
VESA Mount Standard: 75 x 75, 100 x 100
Weight (Approximate): 8.75 lb
Specifications: Includes mouse pad, wrist rest, mouse pouch
+ Larger display sizes may inhibit the keyboard tray folding flat in storage position
Weight Capacity: Listed weight capacity represents total load, including both the monitor and contents of keyboard tray. Maximum monitor weight = 25 lbs (11.3 kg); monitor thickness greater than 3" (7.6 cm) may decrease capacity
Mounting Standards: VESA FDMI MIS-D, 100/75 (hole pattern: 100 x 100 mm & 75 x 75 mm)
Fold-down keyboard tray
Negative-tilt keyboard tray is adjustable 0° to -10°
Integrated cable management system can be configured on either side
Easy-to-clean exterior
Specifications: Ships fully assembled; no tool-adjustments needed for installation
Footprint = 35" x 23" (89 x 59 cm)
Fits on desk surfaces 24" (61 cm) deep or larger
Keyboard tray dimensions = 25" x 9" (64 x 23 cm). Recommended maximum keyboard width = 18" (45 cm)
Keyboard moves in tandem with the worksurface. Tray is positioned 4.5" (11.4 cm) below worksurface to maintain ergonomic spacing between screen height and keyboard
Displays can be placed directly on the worksurface. Alternatively, use our monitor mount kits to integrate displays into system
This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissions of VOC (volatile organic compounds)
Product Weight: 49 lbs (22.3 kg)
Features: Increases the reach of an LX Arm
Polished aluminum metal construction offers greater durability and enhanced aesthetics
Adds another pivot-point for more adjustment flexibility
Cable management feature routes cables under the arm, out of the way
Specifications: Includes height-adjustment column, desk clamp, crossbar, two (2) LCD pivots, worksurface/keyboard, one (1) USB extension cable, two (2) cable wraps
NOTE: Extra-long cables are required to span between standing and sitting heights
Optimized for desks that are 30"-36" deep (76-91 cm): on desks shorter than 30", worksurface will extend beyond desktop edge; on desks deeper than 36", worksurface will not extend to desktop edge
Worksurface Dimensions: 29.5" x 21.8" (75 x 55.4 cm)
Maximum outside width of display is 24.5" (62 cm) when display is 2" (5 cm) thick. Accommodates most displays with screen-size up to 24" as well as some displays with screens as large as 26". Actual allowable width of displays will vary depending on display thickness
Weight Capacity: Maximum total load on height-adjustment assembly = 25 ...
Specifications: Part Number: 97-991
Description: SV Supplemental Storage Drawer, Double (grey/white)
Includes drawer assembly, two medium drawers, dividers
* Stated capacity represents maximum load per individual medium drawer
Internal Dimensions (individual drawer): 2.5"H x 5.5"W x 10.5"D (63.5 x 140 x 267 mm)—includes dividers to configure up to 4 compartments
The primary drawer must be the first drawer attached to the cart. This supplemental drawer attaches to the underside of the primary or other supplemental drawer
Drawer features key-lock access
This drawer is manually operated. It does not interface with a cart’s electrical or auto-locking drawer systems
Purchase a travel-stop accessory if installing 3 or more standard-height drawer rows or 2 or more tall drawer rows. Contact...
Specifications: Description: DS100 Crossbar Extender, Long (black)
Includes: Long Extenders, Center Display Bracket, Attachment hardware
Display: Maximum physical outside width of display = 24.5" (62 cm). This is slightly more than typical display with a 26" screen.
Weight Capacity: 31 lbs (14 kg) per monitor
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Specifications: Description: Spacer kit for mounting to 75 x 75 mm recessed monitors (black)
Includes (1) spacer and (4) Phillips pan head M4 x 25 mm screws
Specifications: Description: Worksurface for WorkFit-S Sit-Stand Workstations (black)
Includes worksurface, mounting brackets with integrated handle, and mounting hardware
Worksurface Dimensions: 0.25" H x 23" W x 15 "D (6 x 585 x 380 mm)
Cannot be added to system where Tablet/Document Holder accessory 97-558-200 is installed
Installation of the worksurface will not impact normal 20" (51 cm) range of sit-stand height adjustment, but may impact the relative vertical adjustment of larger displays when in portrait orientation
When this accessory is added to the WorkFit-S, total weight capacity of the workstation is reduced by 6 lbs (2.7 kg)
Specifications: Stated capacity represents maximum load per individual small drawer
Internal dimensions (individual small drawer): 2.5"H x 3.75"W x 10.5"D (63.4 x 95 x 267 mm) – includes dividers to configure up to 4 compartments
The primary drawer must be the first drawer attached to the cart. The storage drawer attaches to the underside of the primary or supplemental drawer
Drawer features key-lock access
Purchase travel-stop accessory separately based on the number of drawer rows on cart: pt # 97-873 for 3 rows; pt # 97-874 for 4 or 5 rows
This drawer is manually operated. It does not interface with a cart’s electrical or auto-locking drawer systems
Shipping Dimensions: 18" x 18" x 6.5" (457 x 457 x 165 mm)
Shipping Weight: 9 lbs (4 kg)
Warranty: Five (5) years
Specifications: Weight Capacity: individual LCD weight = 7 to 20 lbs (3.2 to 9.1 kg)
Screen = 24"
Lift: 13"
Tilt: 75°
Pan: 360°
Rotation: 360°
Vesa: MIS-D
Includes two (2) LCD arms and extensions, pole, desk clamp
Can be configured to hold a laptop instead of an LCD display; also order the Notebook Tray accessory (50-193-200)
Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Desk clamp attaches to edge up to 2.6" (66 mm) thick
A separately ordered grommet mount accessory (98-035) is available to attach the arm through a hole in the desktop
This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissi...