New Dell Aruba PowerConnect IAP224 Wireless Access Point 802.11ac AP-224 APIN0224 7FCG6 CN-07FCG6

New Dell Aruba Power
Connect IAP224 Wireless Access Point 802.11 ac AP-224 APIN0224 7FCG6
CN-07FCG6 Brand: Dell
Part Number: 7FCG6
MPN: 07FCG6, CN-07FCG6, AP-224
Model: APIN0224
Type: Wireless Access Point
Wireless radio specifications: •
AP type: Indoor, dual radio, 5GHz 802.11 ac and 2.4GH z 802.11 n - In addition to 802.11 n data rates, the 2.4GH z radio supports 802.11 ac data rates using 256-QAM modulation. This gives Turbo
QAM-enabled clients a 33% boost above the maximum supported data rate. • Software-configurable dual radio supports 5GHz and 2.4GH z • 3x3 MIMO with three spatial streams and up to 1.3G bps wireless data rate • Supported frequency band (country-specific restrictions apply): - 2.4000 to 2.4835GH z - 5.150 to 5.250GH z - 5.250 to 5.350GH z - 5.470 to 5.725GH z - 5.725 to 5.850GH z •
Available channels: Dependent upon configured regulatory domain • Dynamic frequency selection optimizes the use of available RF spectrum •
Supported radio technologies: -
802.11 b: Direct-sequence
spread-spectrum - 802.11 a/g/n/ac: Orthogonal frequency-division multiplexing - 802.11 n/ac: 3x3 MIMO with up to three spatial streams •
Supported modulation types: -
802.11 b: BPSK, QPSK, CCK
- 802.11 a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
- 802.11 ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM •
Transmit power: configurable in increments of 0.5 dBm • Maximum (aggregate, conducted
total) transmit power (limited by local regulatory requirements): -
2.4GH z band: +23dBm
(18 dBm per chain) - 5GHz bands: +23dBm (18 dBm per chain) • Advanced Cellular Coexistence feature to effectively deal with interference from cellular systems • Maximum ratio combining for improved receiver performance • Cyclic delay diversity for improved downlink RF performance • Short guard interval for 20, 40 or 80MHz channels • Space time-blocking code for increased range and improved reception • Low-density parity check for high-efficiency error correction and increased throughput • Transmit beam-forming for increased reliability in signal delivery •
Supported data rates (Mbps): -
802.11 b: 1, 2, 5.5, 11
- 802.11 a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11 n: 6.5 to 450 (MCS0 to MCS15) - 802.11 ac: 6.5 to 1, 300 (MCS0 to MCS9, NSS = 1 to 3) • 802.11 n high-throughput (HT) support: HT 20/40 • 802.11 ac very high throughput (VHT) support: VHT 20/40/80 • 802.11 n/ac packet aggregation: A-MPDU, A-MSDU
Power: •
Maximum power consumption: 15W, plus up to 2.5W for attached USB device. • Power sources sold separately •
Direct DC source: 12V DC nominal, +/- 5% • Power over
Ethernet (PoE): 48V DC (nominal) 802.3 af or 802.3 at-compliant source -
Efficient Mode PoE: Power savings with 802.3 af
POE and limited functionality: > USB port disabled > Second Ethernet port disabled > 2.4GH z 802.11 n radio in 1x 3:1 spatial-stream mode > 5GHz 802.11 ac radio operates without restrictions*