VIKING RC-3 VIKING 3 OUTPUT CONTROLLER

Control up to 3 Relay Contacts Remotely The RC-3 enables a standard Touch Tone phone to control up to 3 maintained ON, maintained OFF, or momentary relay contacts from a remote location. The RC-3 is fully user programmable and uses non-volatile E2 memory. Up to three RC-3™s can be daisy chained on the same line to control up to nine relays. The RC-3 features switchable 12V talk battery allowing easy installation on the trunk port. In addition, the unit can be connected directly to a C. O. line or analog PABX/KSU station.

The RC-3 also features a built in pulse dialer activated by a contact closure from an alarm system, temperature sensor, etc. The RC-3 will dial the number up to three times sending alert tones indicating an emergency.
Applications Remote Control of: High security building entry systems Door strikes and gates in conjunction with doorboxes (W-1000, etc. ) Signs, lights, cameras, sprinklers, motors Other contact controlled equipment Can also be used as an emergency dialer for alarm systems, etc. Features User Touch Tone programmable Non-volatile E2 memory 12 digit alarm activated pulse dialer 6 digit security code (to access programming) 6 digit access code (disable or enable for additional control security) Switchable 12V talk battery Relay interrogation tones Programmable relay time delays Cascade up to three RC-3™s to control up to nine relays Programmable ring delay before answering Status LED™s for relays 1, 2, 3 and the answer relay One power adaptor can power up to three units 1 Year Warranty Made in USA
Specifications Power: 120V AC/12V DC 500mA UL listed adapter provided
Shipping Weight: 3.6 kg (8 lbs)
Dimensions: 133mm x 89mm x 44mm ( 5.25 x 3.5 x 1.75 )
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
Pulse Dialing Speed: 10 pps Talk
Battery Output: 12V DC minimum (15V nominal)
Relay contact ratings:. 5A @ 125V AC/1A @ 30V DC On hook time between alarm dialing: 2.5 seconds
Connections: (2) RJ11 jacks, 10 position screw terminal strip