Features: Anodized Black Aluminum heatsink for Computer General northbridge ,Southbridge Cooling ,also can be used for cooling graphics card, vidoe card,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc.
The fins increase the area of the board and thus provide for greater heat transfer.
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Size is 28mm x 28mm x 20mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Anodized Black
Overall Size: 28 x 28 x 20mm/ 1.1" x 1.1" x 0.8" (L*W*H)
Weight: 30g
Package Content: 2pcs x Heatsink
Specifications: 3 High Quality Solid Capacitors, Voltage Regulation, and Overcurrent Protection. 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. SATA 15 PIN interface allows card to run off of separate power rails independent from motherboard effectively reducing power strain on motherboard Version 007S riser kits are the perfect solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners. Compatible with 1x, 4x, 8x,16x PCI-E motherboard slots for ethereum mining Note: Please set BIOS PCIe to GEN2 or GEN 1 if graphics card can not be identified or marked '!' warning sign
Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape
Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc.
Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface.
The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface
Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name : Heatsink;
Material : Aluminium
Color : Silver Tone
Overall Size : 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H)
Weight : 410g
Package Content : 1 x Heatsink
Dimensions: 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H)
Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
product name: Heatsink;
Material : Aluminium
Color : Black
Overall Size : 40 x 40x 11mm/ 1.6" x 1.6" x 0.49" (L*W*H)
Weight : 33g
Package Content : 2 x Heatsink
Features: Aluminum Heat-Sink, For Package TO-220 / TO-3P / TO-247 Rectifier, Transistor or Regulator IC.
Quantity: a lot of 10 Pieces.
M3 Screw Hole.
Size: 25 x 15x 10mm / 0.98" x 0.6" x 0.4"(L*W*H)
Color : Silver Tone
Weight: 4g/ piece
Please check the specification table and make sure that the size of the heatsink fits that of your component
Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating.
These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
Size is 11mm x 11mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Silver Tone
Overall Size: 11mm x 11mm x 5mm
3M 9448A Heat-conductive adhesive tape is included
Package Content: 20 x Heatsink
Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating.
These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
Size is 20mm x 20mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Silver Tone
Overall Size: 20mm x 20mm x 6mm
3M 9448A Heat-conductive adhesive tape is included
Package Content: 10 x Heatsink
Specifications: This converter can support up to three drives simultaneously; Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Compatible Systems: Windows8/7/10/Vista/XP/Mac OS 9/10/Linux; Supports drives with a capacity of up to 6 TB; Support speed up to 5Gbps; Backward compatible with USB 2.0/1.1; On/Off Switch for HDD protection; DC Power Supply 12V for 3.5" devices; LED activity indicator, Plug & Play, simple, reliable and stable
Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk
CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic
at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the
Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
Package included:
10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 1.5mm
Features: Anodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc.
The fins increase the area of the board and thus provide for greater heat transfer.
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Anodized Black
Overall Size: 28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H)
Weight: 5...
Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk
CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic
at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the
Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
Purchase different thickness copper thermal pad you purpose one-step,default combination:
1 piece - 0.1mm
1 piece - 0.3mm
1 piece - 0.4mm
2 pieces - 0.5mm
1 piece - 0.6mm
2 pieces - 0.8mm
1 piece - 1.0mm
1 piece - 1.2mm
Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating.
These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Silver Tone
Overall Size: 8.8mm x 8.8mm x 5mm
Heat-conductive adhesive tape is included
Weight: 35g
Package Content: 50 x Heatsink...
Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating.
These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
Size is 14mm x 14mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Silver Tone
Overall Size: 14mm x 14mm x 6mm
3M 9448A Heat-conductive adhesive tape is included
Package Content: 20 x Heatsink
Specifications: USB 3.1 Type-C to VGA adapter for connecting a USB-C enabled smartphone, tablet or computer to an VGA-equipped monitor or display Compatible with analog VGA-enabled TVs/Monitors/Projectors for both video transfer This USB-C to VGA adapter Only Compatible with device with DisplayPort Alt Mode, Windows computers may need updated USB-C or Thunderbolt 3 drivers from the manufacturer. Video resolution up to 1920x1080p@60Hz for compatibility with most displays, monitors and projectors compatible with the following PC, Laptop: iMac 2017 / iMac Pro 2017 MacBook Pro 2017 & 2016 MacBook 2016 & 2015 New Chromebook Pixel Dell XPS 15 & 13 & 12 Yoga 920 Yoga 910, For Yoga 910 users, please ONLY plug the adapter into the White USB-C female port. Yoga 900(Yoga 4 Pro) HP Spectre x360 13 & 15 inch Asus Zen AIO All in One PC Surface Book 2 More Thunde...