All CategoriesAll Categories- In Stock
Quick View
10pcs/lot 20x20x0.8mm DIY Copper Shim Heatsink thermal Pad Cooling for XBOX360 PS2 3 4 BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.8mm
- Dimensions: 20mm x 20mm x 0.8mm
- Model #: 11-001-271
Quick View
5.25 Inch Front Panel 2 Port USB 2.0 Hub w/ HD Audio Output Port & Microphone Input,USB 9-pin to 2 x USB 2.0 Type-A Female Splitter Adapter Cable w/ 5.25" CD-ROM Bay Bracket
- Type: USB
- Standards: USB 2.0
- Ports: 2 x USB 2.0
- Transfer Rate: 400/480Mbps
- Model #: 525FPU22A
Quick View
En-Labs ENU325SSDHTS 2.5" USB 3.0 HDD SATA External Hard Drive Disk Enclosure Case Box Support UASP for 7 & 9.5mm SATA I/II/III SSD and HDD
- Type: Enclosure
- Maximum Capacity (per Bay): Up to 1TB
- Features: Slim aluminum 2.5" USB 3.0 HDD SATA External Hard Drive Disk Enclosure SATA III to USB 3.0 enclosure,Super Speed USB3.0 offer Speed up to 5Gbps, Ten times of USB2.0 UASP enclosure, 20% faster than traditional USB 3.0, lower CPU utilization Compatible with 7mm~ 9.5mm slim 2.5 inch SATA I,SATA II
- Package Contents: 1 x 2.5 inch HDD Enclosure 1 x 1.64ft USB Data Cable 1 x Screwdrive 1 x Screws package
- Model #: ENU325SSDHTS
Quick View
EnLabs FP525U22AM PC Case 5.25 inch front panel 2 Ports USB 2.0 USB Hub w/ HD Audio Output & Microphone,2.6ft USB 9pin to 2x USB 2.0 Splitter w/ Stereo Audio Mic
- Type: 5.25" internal USB front panel
- Standards: USB 2.0
- Ports: 2 x USB 2.0 w/ Audio & Mic
- Transfer Rate: 400/480Mbps
- Model #: FP525U22AM
Quick View
EnLabs PCIEGIGABIT Gigabit Ethernet PCI Express PCI-E Network Card 10/100/1000Mbps RJ45 LAN Adapter Converter for Desktop PC w/ Full-Profile PCI Slot Cover (Newest Realtek RTL8111F chipest)
- Specifications: A single 10/100/1000Mbps compatible RJ45 Ethernet port Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x and IEEE 802.3ab standards Supports IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding and IEEE 802.3x Full Duplex Flow Control Jumbo frame support Full and half duplex support Supports Wake-on-LAN function Crossover Detection & Auto-Correction (Auto MDI/MDI-X)
- Model #: PCIEGIGABIT
Quick View
USB 3.0 + USB 2.0 2-Port 3.5 Inch Metal Front Panel Hub w/ HD Audio Output Port & Microphone Input,USB 20-pin & 10-pin to USB Type-A Femal Adapter Cable w/ 3.5" Floppy Bay Bracket
- Type: USB
- Standards: USB 3.0/2.0
- Ports: 1 x USB 3.0 + 1 x USB2.0
- Transfer Rate: Up to 5 Gbps
- Model #: 35FPU3U2A
Quick View
10pcs/lot 20x20x1.0mm DIY Copper Shim Heatsink thermal Pad Cooling for XBOX360 PS2 3 4 BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
- Dimensions: 20mm x 20mm x 1.0mm
- Model #: 11-001-272
Quick View
10pcs/lot 20x20x0.5mm DIY Copper Shim Heatsink thermal Pad Cooling for XBOX360 PS2 3 4 BGA CPU VGA Chip RAM IC Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.5mm
- Dimensions: 20mm x 20mm x 0.5mm
- Model #: 11-001-270
Quick View
5pcs/lot Black Aluminum Fin 28x28x11mm Electronic Cooling Radiator Heatsink for CPU,GPU Graphics Video Card,1W LED dissipator
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Anodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H) Weight: 5...
- Model #: 11-001-329
Quick View
10pcs/lot Aluminum Heatsink 8.8x8.8x5mm with 3M 8810 Thermally Conductive Adhesive Tapes Electronic Chip Cooling Radiator Cooler
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
- Model #: 11-001-393
Quick View
5.25 Inch Front Panel 2 Port USB 3.0 Hub w/ HD Audio Output Port & Microphone Input,USB 20-pin to 2 x USB 3.0 Type-A Female Splitter Adapter Cable w/ 5.25" CD-ROM Bay Bracket
- Type: USB
- Standards: USB 3.0
- Ports: 2 x USB 3.0
- Transfer Rate: Up to 5 Gbps
- Model #: 525FPU32A
Quick View
USB 3.0 + USB 5V/2.4A Charge Port 3.5 Inch Front Panel Hub w/ HD Audio Output Port & Microphone Input,USB 20-pin to Type-A Female Adapter Cable w/ 3.5" Floppy Bay Bracket,BC 1.2 5V/ 2.4A Charging
- Type: USB
- Standards: USB 3.0
- Transfer Rate: Up to 5 Gbps
- Color: Black
- Model #: 35FPU3BC21A
Quick View
20pcs/lot Aluminum Heatsink 14*14*6mm Electronic Chip Radiator Cooler w/ 3M9448a Thermal Double Sided Adhesive Tape for IC,3D Printer,Motherboard,GPU,Xbox Cooling
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 14mm x 14mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 14mm x 14mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
- Dim...
- Model #: 11-001-052
Quick View
EnLabs FP525U34PL PC Case 5.25 inch front panel 4 Ports USB 3.0 USB Hub,Dual 60CM 2 x USB 3.0 Type A Female to Motherboard 20pin Splitter Cables -Black Plastic
- Type: USB Hub
- Standards: USB 3.0
- Ports: 4 x USB 3.0
- Transfer Rate: Up to 5 Gbps
- Model #: FP525U34PL
Quick View
4 Port PCIE PCI-e to USB 3.0 Expansion Card - USB 3.0 Hub Controller PCI Express Card Adapter w/ Extra SATA 15 pin Power
- Type: PCI Express to USB Card
- External USB Ports: 4-port USB 3.0
- Specifications: Bus Type:PCI Express Type Standard:Profile (LP bracket incl.) Chipset:NEC UPD720201 Interface: USB 3.0 Port Type and Rate :USB 3.0 - 5 Gbit/s Connector Type(s): 1 - PCI Express x1 Male External Ports: 4 - USB Type-A (9 pin) USB 3.0 Female Internal Ports : 1 - SATA 15pin interface
- Model #: PCE4USB-RS4
Quick View
New Premium 10pcs/lot 15x15x1.5mm DIY Copper Shim Heatsink thermal Pad for Laptop GPU CPU VGA Chip RAM Memory chips Copper Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 1.5mm
- Dimensions: 15mm x 15mm x 1.5mm
- Model #: 11-001-269
Quick View
New 50pcs Silver 14x14x6mm Aluminum Heat Sink Radiator Heatsink for IC, CPU,GPU, Electronic Chipset heat dissipation
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name : Heatsink Material : Aluminium Color : Silver Tone Overall Size : 14 x 14x 6mm/ 0.55" x 0.55" x 0.24" (L*W*H) Weight : 100g Package Content : 50 x Heatsink
- Dimensions: 14 x 14x 6mm
- Model #: 11-001-192(50)
Quick View
USB 2.0 2-Port 3.5 Inch Metal Front Panel Hub w/ HD Audio Output Port & Microphone Input,USB 10pin to 2 x Type A Female Splitter with Floppy Bay Bracket
- Type: USB
- Standards: USB 2.0
- Ports: 2 x USB 2.0
- Transfer Rate: 400/480Mbps
- Model #: 35FPU22PA
Quick View
10pcs/lot Aluminum Heatsink11x11x5mm with 3M 8810 Thermally Conductive Adhesive Tapes Electronic Chip Cooling Radiator Cooler
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: 10 pcs of 11x11x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. T...
- Model #: 11-001-394
Quick View
5pcs/lot Aluminum Heatsink14x14x6mm with 3M 8810 Thermally Conductive Adhesive Tapes Electronic Chip Cooling Radiator Cooler
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
- Model #: 11-001-395
Quick View
EnLabs FP525U32PL PC Case 5.25 inch front panel 2 Ports USB 3.0 USB Hub,60CM 2 x USB 3.0 Type A Female to Motherboard 20pin Splitter Cables -Black Plastic
- Type: USB
- Standards: USB 3.0
- Ports: 2 x USB 3.0
- Transfer Rate: Up to 5 Gbps
- Model #: FP525U32PL
Quick View
New Premium 10pcs/lot 15x15x0.6mm DIY Copper Shim Heatsink thermal Pad for Laptop GPU CPU VGA Chip RAM Memory chips Copper Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.6mm
- Dimensions: 15mm x 15mm x 0.5mm
- Model #: 11-001-268
